Re: [PATCH] can: enable multi-queue for SocketCAN devices

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1.1: Type: text/plain, Size: 1277 bytes --]

On 03/15/2018 10:08 AM, Jonas Mark (BT-FIR/ENG1) wrote:
>> Normal SPI?
> 
> Yes, normal SPI (CLK, MOSI, MISO, SEL) plus two GPIOs for flow control.
> The CAN peripheral (SPI slave) asserts the additional signals to
> request a transfer and to signal that it is busy.

Sounds interesting.

>>> I will have to check but I am pretty confident that we would be willing
>>> to publish the driver on these mailing lists as well. We will anyhow
>>> ship the source code (or a written offer) with every distribution.
>>
>> Sure - can I find your devices used and low priced on ebay :) ?
>
> That is rather unlikely. Though, you could buy a building containing
> one.

One building one device sounds like a bad deal to me :)

>>> If you are really serious about the review I will get the process
>>> rolling for an early publication of our driver.
>>
>> Yes, please go ahead!
> 
> Ok, I'll kick off the process and start to collect the required signatures.

Tnx.

regards,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]