Re: [PATCH 6/7] arm64: dts: qcom: monaco-arduino-monza: Add sound node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/9/26 4:24 PM, Srinivas Kandagatla wrote:
> Add audio support for Arduino VENTUNOQ board, which has Headset, Mic, Ear
> and Lineout connected to external Maxim max98091 codec, HDMI audio
> via ADV7535 dsi-hdmi bridge.
> 
> Co-developed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
> ---
>  .../boot/dts/qcom/monaco-arduino-monza.dts    | 66 +++++++++++++++++++
>  arch/arm64/boot/dts/qcom/monaco.dtsi          | 55 ++++++++++++++++
>  2 files changed, 121 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> index b6db2a7151f1..be62b3dabbca 100644
> --- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> @@ -80,6 +80,72 @@ hdmi_connector_in: endpoint {
>  		};
>  	};
>  
> +	sound {
> +		compatible = "qcom,qcs8275-sndcard";
> +		model = "arduino-monza";
> +		audio-routing = "IN12",  "Headset Mic12",
> +				"Headset Mic12",  "MICBIAS",
> +				"IN56",  "Headset Mic56",
> +				"Headset Mic56",  "MICBIAS",
> +				"MIC1",  "MICBIAS",
> +				"Headphone",  "HPL",
> +				"Headphone",  "HPR",
> +				"Receiver",  "RCVL",
> +				"Receiver",  "RCVR",
> +				"Speaker",  "SPKL",
> +				"Speaker",  "SPKR";

All lines have a double-space

other than that

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad