Issue Report: forcedeth v0.23, irq with unknown events

Issue Report: forcedeth v0.23, irq with unknown events

[Adam.Torgerson]

Hello,
I'm getting tons of these kernel messages:

"eth0: received irq with unknown events 0x1. Please report"

on an Abit NF7 (nforce2 Ultra400 + MCP-T is what the box says), so I figured I
better report it. The driver works, but is quite slow (only 256kB/s on a local
100Mbit network). lspci shows the device as:

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev
a1)

Currently using 2.6.4-rc1-mm2. Let me know if I can provide any more information
(please CC me as I'm not on any lists).

Thanks for the driver and keep up the good work,
Adam

Re: Issue Report: forcedeth v0.23, irq with unknown events

[Carl-Daniel Hailfinger]

Adam.Torgerson@colorado.edu wrote:
> Hello, I'm getting tons of these kernel messages:
> 
> "eth0: received irq with unknown events 0x1. Please report"

This event is no longer unknown. It is a RX error and you are not the only
one encountering it. I have a patch which will speed up the network a bit
and remove the message, but it seems you have serious connection problems.

> on an Abit NF7 (nforce2 Ultra400 + MCP-T is what the box says), so I
> figured I better report it. The driver works, but is quite slow (only
> 256kB/s on a local 100Mbit network). lspci shows the device as:
> 
> 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
> Controller (rev a1)
> 
> Currently using 2.6.4-rc1-mm2. Let me know if I can provide any more
> information (please CC me as I'm not on any lists).

I will send you an updated version of the driver soon for testing.

Rregards,
Carl-Daniel
-- 
http://www.hailfinger.org/