From: Andrew Lunn <andrew@lunn.ch>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net 1/2] net: dsa: mv88e6xxx: fix 88E6171 statistics snapshot
Date: Mon, 26 Oct 2026 00:14:27 +0100 [thread overview]
Message-ID: <404d5f2d-24a5-4edc-897b-b1b3c54a20e1@lunn.ch> (raw)
In-Reply-To: <20261024182124.296988-2-f.fainelli@gmail.com>
On Sat, Oct 24, 2026 at 11:21:23AM -0700, Florian Fainelli wrote:
> The 88E6171 belongs to the 6351 family and takes the port number in the
> low bits of the statistics operation register. The 6320 snapshot helper
> instead encodes the port as (port + 1) << 5. On an EA4500, this causes
> ethtool -S to return physical port 0's MIB counters for every user port.
> Traffic on other ports does not update their reported hardware counters.
>
> Before the snapshot operation was moved into the chip operations, only
> the 6320 and 6352 families used the shifted encoding. The refactoring
> incorrectly assigned that encoding to the 88E6171 as well.
>
> Use the unshifted snapshot helper for the 88E6171. Tested on an EA4500:
> pings through different switch ports now update only the corresponding
> port's hardware counters.
>
> Fixes: a605a0fe7115 ("net: dsa: mv88e6xxx: Abstract stats_snapshot into ops structure")
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 7f68a0c55802..67daf3b9cb48 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -4610,7 +4610,7 @@ static const struct mv88e6xxx_ops mv88e6171_ops = {
> .port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
> .port_get_cmode = mv88e6352_port_get_cmode,
> .port_setup_message_port = mv88e6xxx_setup_message_port,
> - .stats_snapshot = mv88e6320_g1_stats_snapshot,
> + .stats_snapshot = mv88e6xxx_g1_stats_snapshot,
> .stats_set_histogram = mv88e6095_g1_stats_set_histogram,
> .stats_get_sset_count = mv88e6095_stats_get_sset_count,
> .stats_get_strings = mv88e6095_stats_get_strings,
static const struct mv88e6xxx_ops mv88e6171_ops = {
/* MV88E6XXX_FAMILY_6351 */
...
.stats_snapshot = mv88e6320_g1_stats_snapshot,
static const struct mv88e6xxx_ops mv88e6175_ops = {
/* MV88E6XXX_FAMILY_6351 */
...
.stats_snapshot = mv88e6320_g1_stats_snapshot,
static const struct mv88e6xxx_ops mv88e6350_ops = {
/* MV88E6XXX_FAMILY_6351 */
...
.stats_snapshot = mv88e6320_g1_stats_snapshot,
static const struct mv88e6xxx_ops mv88e6351_ops = {
/* MV88E6XXX_FAMILY_6351 */
...
.stats_snapshot = mv88e6320_g1_stats_snapshot,
Should these be changed as well?
Looking at DSDT:
static GT_STATUS statsCapture
(
IN GT_QD_DEV *dev,
IN GT_U8 port,
IN GT_U8 bank
)
...
if (IS_IN_DEV_GROUP(dev,DEV_RMON_PORT_BITS))
{
portNum = (port + 1) << 5;
}
else
{
portNum = (GT_U16)port;
}
and
#define DEV_RMON_PORT_BITS \
( DEV_88E6065 | DEV_88E6065 | DEV_88E6352_FAMILY )
So your change looks correct, just not complete.
Andrew
next prev parent reply other threads:[~2026-10-25 23:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-24 18:21 [PATCH net 0/2] net: dsa: mv88e6xxx: 88E6171 stats fixes Florian Fainelli
2026-10-24 18:21 ` [PATCH net 1/2] net: dsa: mv88e6xxx: fix 88E6171 statistics snapshot Florian Fainelli
2026-10-25 18:21 ` netdev-bot+sashiko
2026-10-25 23:14 ` Andrew Lunn [this message]
2026-10-24 18:21 ` [PATCH net 2/2] net: dsa: mv88e6xxx: fix 88E6171 statistics type Florian Fainelli
2026-10-25 23:19 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=404d5f2d-24a5-4edc-897b-b1b3c54a20e1@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox