From: Nivedita Singhvi <niv@us.ibm.com>
To: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: linux-kernel@vger.kernel.org, netdev@oss.sgi.com
Subject: Re: TCP hangs
Date: Tue, 04 May 2004 08:37:53 -0700 [thread overview]
Message-ID: <4097B8D1.4010008@us.ibm.com> (raw)
In-Reply-To: <Pine.LNX.4.58.0405031238110.18691@artax.karlin.mff.cuni.cz>
[cc'ing netdev]
Mikulas Patocka wrote:
>>Which Linux kernel (distro, version)? What hangs? Is it just that
>>connection? All the kernel? Client end or remote server end?
> I don't know what version is that. Have no access to it. Neither server
> nor client crashes, it just stops receiving data in connection.
That is strange - since your trace clearly showed the client
sending a FIN and a reset, so the client socket should have
gone away. Does netstat still show the connection? What state
is it in?
>>It is not wrong to send no data in a zero window probe. TCP MUST,
>>however, continue sending the probes while the window is zero.
>>
>>Assuming some reordering (see embedded comments in the trace,
>>below), all of the following looks correct on the Linux end.
>>Also, since the client side responds to the data coming
>>in with resets and zero windows, the client socket has gone
>>away too.
>>
>>Once the resets reach the server, it presumably has torn down its
>>socket - and there are no more packets exchanged. All done.
>>
>>So nothing in the trace looks like a hang or an incorrect
>>resolution. (other than the fact that the app seems to have died,
>>and it doesn't respond to the zero window probes as it should).
>>Client/app broken, seems like.
>
>
> Yes. So if client receives ACK, it should respond with other ACK?
> How does the TCP prevent ping-pong effect --- clients sending ACKs to each
> other indefinitely? How should the client know if the ACK is window probe
> (to which it should respond) or normal ACK (to which it shoudn't respond).
> What RFC part does say that?
You are right, it should send data. What the implementations
do (at least recent Linux 2.4, 2.6) is send an out of window
sequence number (just the previous one acked by the client)
to force the receiver to ack. Not sure why its not doing
that in this case - but could be an old Linux. Its confusing
since in the trace, the window seems to open up again (2 + scale).
I'll check to see if we send acks or zerop probes under any
circumstances in this way in the current code again, but don't
think so.
But since the client kernel has seen the app go away, and
has sent resets to the server, and presumably the server tears
down the connection when it gets the reset and never sends
anything again, why is the client having a problem at all?
Nothing need hang here, or even seems to from the kernel
point of view.
Note that the window scale factor of 10 implies a pretty
big window, and so for that to come down to zero implies
the app has really crashed or aborted..
Can you recreate the problem? What was happening in user
space?
thanks,
Nivedita
> Mikulas
>
>
>>thanks,
>>Nivedita
>>
>>Edited trace:
>>
>>par = paranoia.kolej.mff.cuni.cz.65461
>>http = 213.29.7.213.http [Linux box]
>>
>>1.
>>16:34:49.832097 par > http: SWE 1711254266:1711254266(0)
>>win 8192 <mss 1460,sackOK,wscale 10,eol>
>>
>>2.
>>16:34:49.838957 http > par: S 1163781419:1163781419(0)
>>ack 1711254267 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 0>
>>
>>3.
>>16:34:49.838968 par > http: P ack 1 win 8
>>
>>4.
>>16:34:49.840002 par > http: P 1:500(499) ack 1 win 8
>>
>>5.
>>16:34:49.847349 http > par: . ack 500 win 6432
>>
>>6.
>>16:34:49.863592 http > par: . 1:1461(1460) ack 500 win 6432
>>
>>7.
>>16:34:49.863651 par > http: P ack 1461 win 6
>>
>>8.
>>16:34:49.867490 http > par: . 1461:2921(1460) ack 500 win 6432
>>
>>9.
>>16:34:49.867558 par > http: P ack 2921 win 6
>>
>>10.
>>16:34:49.871498 http > par: . 2921:4381(1460) ack 500 win 6432
>>
>>11.
>>16:34:49.871567 par > http: P ack 4381 win 5
>>
>>12.
>>16:34:49.872729 http > par: . 4381:5841(1460) ack 500 win 6432
>>
>>13.
>>16:34:49.872777 par > http: P ack 5841 win 3
>>
>>14.
>>16:34:49.875631 http > par: . 7301:8761(1460) ack 500 win 6432
>>
>>15.
>>16:34:49.875714 par > http: P ack 5841 win 3 <nop,nop,sack sack 1 {7301:8761} >
>>
>>16.
>>16:34:49.876881 http > par: . 5841:7301(1460) ack 500 win 6432
>>
>>17.
>>16:34:49.876953 par > http: P ack 8761 win 0
>>
>>18.
>>16:34:49.907290 par > http: P ack 8761 win 2
>>^^^^ this packet was probably lost or the last two were reordered
>>
>>19.
>>16:34:50.088544 http > par: . ack 500 win 6432
>>
>>20.
>>16:34:50.512936 http > par: . ack 500 win 6432
>>^^^ this looks to me like a bug --- window probe doesn't contain data
>>==> not a problem, the receiving client should respond
>>==> with an ack and updated window. But why is not the
>>==> client responding to the window probes?
>>
>>21.
>>16:34:51.348911 http > par: . ack 500 win 6432
>>
>>22.
>>16:34:53.028754 http > par: . ack 500 win 6432
>>
>>23.
>>16:34:56.389624 http > par: . ack 500 win 6432
>>
>>24.
>>16:35:03.110512 http > par: . ack 500 win 6432
>>^^^ exponential backoff on window probes is fine, except that
>>the packets are pure acks
>>
>>25.
>>16:35:16.552095 http > par: . ack 500 win 6432
>>
>>26.
>>16:35:43.435482 http > par: . ack 500 win 6432
>>
>>27.
>>16:35:58.706896 par > http: FP 500:500(0) ack 8761 win 17
>>^^^ paranoia closed the connection without receiving any data
>>
>>==> So presumably the client application did a close or
>>==> has gone away?
>
>
> Did close().
>
>
>>28.
>>16:35:58.717487 http > par: . 10221:11681(1460) ack 501 win 6432
>>==> missing/expected 8761:10221
>>
>>29.
>>16:35:58.717569 par > http: R 501:501(0) ack 11681 win 0
>>==> clearly reordered trace since client is acking 11681
>>==> which we have not yet seen arrive in the trace
>
>
> This is reset, not ack. It just means that client is not willing to
> receive more data after shutdown(SHUT_RD).
>
>
>>30.
>>16:35:58.718673 http > par: . 8761:10221(1460) ack 501 win 6432
>>==> Nooo, if the previous reset (R) reached http, it
>>==> should not be barfing more data at us. Going by
>>==> the ack from the client above, this was sent first.
>>
>>31.
>>16:35:58.718692 par > http: R 501:501(0) ack 10221 win 0
>>==> reset, continued window of 0, implies no socket
>>==> remaining here (?).
>>
>>32.
>>16:35:58.720054 http > par: . 11681:13141(1460) ack 501 win 6432
>>
>>33.
>>16:35:58.720074 par > http: R 501:501(0) ack 13141 win 0
>>
>>==> A more likely sequence of events is:
>>==> packet #30, #28, #32 are sent by the http server, and
>>==> packets #31, #29, #33 are sent in response when they
>>==> reach the client.
>>
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next parent reply other threads:[~2004-05-04 15:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.58.0405021602120.20423@artax.karlin.mff.cuni.cz>
[not found] ` <409583B1.5040906@us.ibm.com>
[not found] ` <Pine.LNX.4.58.0405031238110.18691@artax.karlin.mff.cuni.cz>
2004-05-04 15:37 ` Nivedita Singhvi [this message]
2004-05-04 16:26 ` TCP hangs Mikulas Patocka
2004-05-04 16:48 ` Nivedita Singhvi
2004-05-04 21:20 ` Mikulas Patocka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4097B8D1.4010008@us.ibm.com \
--to=niv@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikulas@artax.karlin.mff.cuni.cz \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).