From: P@draigBrady.com
To: Robert Olsson <Robert.Olsson@data.slu.se>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>,
jamal <hadi@cyberus.ca>,
Martin Josefsson <gandalf@wlug.westbo.se>,
Scott Feldman <sfeldma@pobox.com>,
mellia@prezzemolo.polito.it,
Jorge Manuel Finochietto <jorge.finochietto@polito.it>,
Giulio Galante <galante@polito.it>,
netdev@oss.sgi.com
Subject: Re: 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit)
Date: Mon, 06 Dec 2004 17:32:17 +0000 [thread overview]
Message-ID: <41B497A1.6090600@draigBrady.com> (raw)
In-Reply-To: <16820.37049.396306.295878@robur.slu.se>
Robert Olsson wrote:
> Lennert Buytenhek writes:
> > On Mon, Dec 06, 2004 at 08:11:02AM -0500, jamal wrote:
> >
> > > Hopefully someone will beat me to testing to see if our forwarding
> > > capacity now goes up with this new recipe.
>
>
> A breakthrough we now can send small packets at wire speed it will make
> development and testing much easier...
It surely will!!
Just to recap, 2 people have been able to tx @ wire speed.
The origonal poster was able to receive at wire speed,
but could only TX at about 50% wire speed.
It would be really cool if we could combine this
to bridge @ wire speed.
--
Pádraig Brady - http://www.pixelbeat.org
--
next prev parent reply other threads:[~2004-12-06 17:32 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1101467291.24742.70.camel@mellia.lipar.polito.it>
2004-11-26 14:05 ` [E1000-devel] Transmission limit P
2004-11-26 15:31 ` Marco Mellia
2004-11-26 19:56 ` jamal
2004-11-29 14:21 ` Marco Mellia
2004-11-30 13:46 ` jamal
2004-12-02 17:24 ` Marco Mellia
2004-11-26 20:06 ` jamal
2004-11-26 20:56 ` Lennert Buytenhek
2004-11-26 21:02 ` Lennert Buytenhek
2004-11-27 9:25 ` Harald Welte
[not found] ` <20041127111101.GC23139@xi.wantstofly.org>
2004-11-27 11:31 ` Harald Welte
2004-11-27 20:12 ` Cesar Marcondes
2004-11-29 8:53 ` Marco Mellia
2004-11-29 14:50 ` Lennert Buytenhek
2004-11-30 8:42 ` Marco Mellia
2004-12-01 12:25 ` jamal
2004-12-02 13:39 ` Marco Mellia
2004-12-03 13:07 ` jamal
2004-11-26 15:40 ` Robert Olsson
2004-11-26 15:59 ` Marco Mellia
2004-11-26 16:57 ` P
2004-11-26 20:01 ` jamal
2004-11-29 10:19 ` P
2004-11-29 13:09 ` Robert Olsson
2004-11-29 20:16 ` David S. Miller
2004-12-01 16:47 ` Robert Olsson
2004-11-30 13:31 ` jamal
2004-11-30 13:46 ` Lennert Buytenhek
2004-11-30 14:25 ` jamal
2004-12-01 0:11 ` Lennert Buytenhek
2004-12-01 1:09 ` Scott Feldman
2004-12-01 15:34 ` Robert Olsson
2004-12-01 16:49 ` Scott Feldman
2004-12-01 17:37 ` Robert Olsson
2004-12-02 17:54 ` Robert Olsson
2004-12-02 18:23 ` Robert Olsson
2004-12-02 23:25 ` Lennert Buytenhek
2004-12-03 5:23 ` Scott Feldman
2004-12-10 16:24 ` Martin Josefsson
2004-12-01 18:29 ` Lennert Buytenhek
2004-12-01 21:35 ` Lennert Buytenhek
2004-12-02 6:13 ` Scott Feldman
2004-12-03 13:24 ` jamal
2004-12-05 14:50 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Lennert Buytenhek
2004-12-05 15:03 ` Martin Josefsson
2004-12-05 15:15 ` Lennert Buytenhek
2004-12-05 15:19 ` Martin Josefsson
2004-12-05 15:30 ` Martin Josefsson
2004-12-05 17:00 ` Lennert Buytenhek
2004-12-05 17:11 ` Martin Josefsson
2004-12-05 17:38 ` Martin Josefsson
2004-12-05 18:14 ` Lennert Buytenhek
2004-12-05 15:42 ` Martin Josefsson
2004-12-05 16:48 ` Martin Josefsson
2004-12-05 17:01 ` Martin Josefsson
2004-12-05 17:58 ` Lennert Buytenhek
2004-12-05 17:44 ` Lennert Buytenhek
2004-12-05 17:51 ` Lennert Buytenhek
2004-12-05 17:54 ` Martin Josefsson
2004-12-06 11:32 ` 1.03Mpps on e1000 (was: " jamal
2004-12-06 12:11 ` Lennert Buytenhek
2004-12-06 12:20 ` jamal
2004-12-06 12:23 ` Lennert Buytenhek
2004-12-06 12:30 ` Martin Josefsson
2004-12-06 13:11 ` jamal
[not found] ` <20041206132907.GA13411@xi.wantstofly.org>
[not found] ` <16820.37049.396306.295878@robur.slu.se>
2004-12-06 17:32 ` P [this message]
2004-12-08 23:36 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] " Ray Lehtiniemi
[not found] ` <41B825A5.2000009@draigBrady.com>
[not found] ` <20041209161825.GA32454@mail.com>
2004-12-09 17:12 ` 1.03Mpps on e1000 P
[not found] ` <20041209164820.GB32454@mail.com>
2004-12-09 17:19 ` P
2004-12-09 23:25 ` Ray Lehtiniemi
2004-12-05 21:12 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Scott Feldman
2004-12-05 21:25 ` Lennert Buytenhek
2004-12-06 1:23 ` 1.03Mpps on e1000 (was: " Scott Feldman
2004-12-02 17:31 ` [E1000-devel] Transmission limit Marco Mellia
2004-12-03 20:57 ` Lennert Buytenhek
2004-12-04 10:36 ` Lennert Buytenhek
2004-12-01 12:08 ` jamal
2004-12-01 15:24 ` Lennert Buytenhek
2004-11-26 17:58 ` Robert Olsson
2004-11-27 20:00 ` Lennert Buytenhek
2004-11-29 12:44 ` Marco Mellia
2004-11-29 15:19 ` Lennert Buytenhek
2004-11-29 17:32 ` Marco Mellia
2004-11-29 19:08 ` Lennert Buytenhek
2004-11-29 19:09 ` Lennert Buytenhek
2004-12-05 18:25 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Manfred Spraul
-- strict thread matches above, loose matches on Subject: below --
2004-12-06 19:10 Robert Olsson
2004-12-06 22:29 ` Martin Josefsson
2004-12-07 3:20 ` jamal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41B497A1.6090600@draigBrady.com \
--to=p@draigbrady.com \
--cc=Robert.Olsson@data.slu.se \
--cc=buytenh@wantstofly.org \
--cc=galante@polito.it \
--cc=gandalf@wlug.westbo.se \
--cc=hadi@cyberus.ca \
--cc=jorge.finochietto@polito.it \
--cc=mellia@prezzemolo.polito.it \
--cc=netdev@oss.sgi.com \
--cc=sfeldma@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).