From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Schmidt Subject: Re: [RFT] New syskonnect gigabit ether driver (skge) Date: Mon, 17 Jan 2005 22:07:07 +0100 Message-ID: <41EC28FB.3040904@stud.feec.vutbr.cz> References: <20050114155613.3c68e829@dxpl.pdx.osdl.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Jeff Garzik , Christoph Hellwig , netdev@oss.sgi.com Return-path: To: Stephen Hemminger In-Reply-To: <20050114155613.3c68e829@dxpl.pdx.osdl.net> Sender: netdev-bounce@oss.sgi.com Errors-to: netdev-bounce@oss.sgi.com List-Id: netdev.vger.kernel.org Stephen Hemminger wrote: > Here is my rewrite of the SysKonnect Gigabit Ether driver. Gave up on > the existing sk98lin driver because it bloated and limited by the requirement > to be portable. This version is still very experimental and has only been > run for several days on my LinkSys card (single port Yukon). > Please test on other hardware and let me know what you find out. Works with no problems with the integrated card on my Asus A8V Deluxe motherboard (architecture is x86_64). I only tested 100Mbit full-duplex. 0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) Subsystem: Asustek Computer, Inc.: Unknown device 811a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-