skge no workee here

skge no workee here

[maxer]

Jgarzik wanted me to forward this to you today.

This nic is on the mobo. sk98lin from kernel 2.6.9 works great. However:

If I go into Fedora Core's Network Device Control applet, it shows eth0 
inactive. If I try to activate it I get:
skge device eth0:1 does not seem to be present, delaying initialization.

Under Network Configuration tool trying to probe under "Bind to MAC 
address gives the result as [Errno 19] No such device.

So while the driver clearly loads, it can't find the device nor activate 
it.

What should I do to remedy this. I can bring up the device under kernel 
2.6.9, but no kernel beyond this 2.6.10 or 2.6.11-xx works.

04:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit 
Ethernet Controller (rev 17)
       Subsystem: Intel Corp.: Unknown device 3065
       Flags: bus master, fast devsel, latency 0, IRQ 3
       Memory at ff720000 (64-bit, non-prefetchable) [size=16K]
       I/O ports at a800 [size=256]
       Expansion ROM at ff700000 [disabled] [size=128K]
       Capabilities: [48] Power Management version 2
       Capabilities: [50] Vital Product Data
       Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 
Enable-
       Capabilities: [e0] Express Legacy Endpoint IRQ 0
       Capabilities: [100] Advanced Error Reporting

Thanks,

RaXeT

Re: skge no workee here

[Francois Romieu]

maxer <maxer@xmission.com> :
[...]

Interesting.

Can you send dmesg/config for the working 2.6.9 kernel and the dysfunctional
2.6.10 ?

The brand of the motherboard would be welcome too.

--
Ueimor