From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxer Subject: skge no workee here Date: Sun, 06 Feb 2005 09:19:48 -0700 Message-ID: <420643A4.9010407@xmission.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit To: netdev@oss.sgi.com Sender: netdev-bounce@oss.sgi.com Errors-to: netdev-bounce@oss.sgi.com List-Id: netdev.vger.kernel.org Jgarzik wanted me to forward this to you today. This nic is on the mobo. sk98lin from kernel 2.6.9 works great. However: If I go into Fedora Core's Network Device Control applet, it shows eth0 inactive. If I try to activate it I get: skge device eth0:1 does not seem to be present, delaying initialization. Under Network Configuration tool trying to probe under "Bind to MAC address gives the result as [Errno 19] No such device. So while the driver clearly loads, it can't find the device nor activate it. What should I do to remedy this. I can bring up the device under kernel 2.6.9, but no kernel beyond this 2.6.10 or 2.6.11-xx works. 04:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 17) Subsystem: Intel Corp.: Unknown device 3065 Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at ff720000 (64-bit, non-prefetchable) [size=16K] I/O ports at a800 [size=256] Expansion ROM at ff700000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [e0] Express Legacy Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Thanks, RaXeT