From: Jeff Garzik <jgarzik@pobox.com>
To: Netdev <netdev@oss.sgi.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@osdl.org>
Subject: netdev-2.6 queue updated
Date: Thu, 10 Mar 2005 00:37:11 -0500 [thread overview]
Message-ID: <422FDD07.9060808@pobox.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 512 bytes --]
All the stuff that was waiting for Linus has been sent. Here's what's
sitting around in the netdev-2.6 to "stew" for a bit:
* wireless-2.6 tree (bk://gkernel.bkbits.net/wireless-2.6)
* 8139cp updates
* starfire update
* 8139too iomap conversion
* natsemi long/short cable option (no longer needed?)
* new skge driver from Stephen Hemminger
BK URL, Patch URL, and changelog attached.
Note that the patch is diff'd against 2.6.11-bk6, which will not exist
until four hours after this email is sent.
Jeff
[-- Attachment #2: netdev-2.6.txt --]
[-- Type: text/plain, Size: 6355 bytes --]
BK users:
bk pull bk://gkernel.bkbits.net/netdev-2.6
Patch:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.11-bk6-netdev1.patch.bz2
This will update the following files:
drivers/net/wireless/ieee802_11.h | 78
MAINTAINERS | 7
drivers/net/8139cp.c | 100
drivers/net/8139too.c | 194 -
drivers/net/Kconfig | 12
drivers/net/Makefile | 1
drivers/net/natsemi.c | 11
drivers/net/skge.c | 3385 ++++++++++++++++++++++
drivers/net/skge.h | 3005 +++++++++++++++++++
drivers/net/starfire.c | 142
drivers/net/starfire_firmware.h | 346 ++
drivers/net/wireless/Kconfig | 2
drivers/net/wireless/Makefile | 2
drivers/net/wireless/atmel.c | 62
drivers/net/wireless/hostap/Kconfig | 104
drivers/net/wireless/hostap/Makefile | 8
drivers/net/wireless/hostap/hostap.c | 1205 +++++++
drivers/net/wireless/hostap/hostap.h | 57
drivers/net/wireless/hostap/hostap_80211.h | 107
drivers/net/wireless/hostap/hostap_80211_rx.c | 1080 +++++++
drivers/net/wireless/hostap/hostap_80211_tx.c | 522 +++
drivers/net/wireless/hostap/hostap_ap.c | 3259 +++++++++++++++++++++
drivers/net/wireless/hostap/hostap_ap.h | 272 +
drivers/net/wireless/hostap/hostap_common.h | 556 +++
drivers/net/wireless/hostap/hostap_config.h | 86
drivers/net/wireless/hostap/hostap_crypt.c | 167 +
drivers/net/wireless/hostap/hostap_crypt.h | 50
drivers/net/wireless/hostap/hostap_crypt_ccmp.c | 486 +++
drivers/net/wireless/hostap/hostap_crypt_tkip.c | 696 ++++
drivers/net/wireless/hostap/hostap_crypt_wep.c | 281 +
drivers/net/wireless/hostap/hostap_cs.c | 785 +++++
drivers/net/wireless/hostap/hostap_download.c | 761 +++++
drivers/net/wireless/hostap/hostap_hw.c | 3607 +++++++++++++++++++++++
drivers/net/wireless/hostap/hostap_info.c | 469 +++
drivers/net/wireless/hostap/hostap_ioctl.c | 3624 ++++++++++++++++++++++++
drivers/net/wireless/hostap/hostap_pci.c | 452 ++
drivers/net/wireless/hostap/hostap_plx.c | 611 ++++
drivers/net/wireless/hostap/hostap_proc.c | 466 +++
drivers/net/wireless/hostap/hostap_wlan.h | 1071 +++++++
drivers/net/wireless/orinoco.c | 11
drivers/net/wireless/wl3501.h | 4
include/linux/pci_ids.h | 3
include/net/ieee80211.h | 887 +++++
include/net/ieee80211_crypt.h | 86
net/Kconfig | 2
net/Makefile | 1
net/ieee80211/Kconfig | 67
net/ieee80211/Makefile | 11
net/ieee80211/ieee80211_crypt.c | 259 +
net/ieee80211/ieee80211_crypt_ccmp.c | 470 +++
net/ieee80211/ieee80211_crypt_tkip.c | 708 ++++
net/ieee80211/ieee80211_crypt_wep.c | 272 +
net/ieee80211/ieee80211_module.c | 268 +
net/ieee80211/ieee80211_rx.c | 1206 +++++++
net/ieee80211/ieee80211_tx.c | 448 ++
net/ieee80211/ieee80211_wx.c | 471 +++
56 files changed, 32947 insertions(+), 356 deletions(-)
through these ChangeSets:
<jketreno:linux.intel.com>:
o ieee80211 subsystem
<mgalgoci:parcelfarce.linux.theplanet.co.uk>:
o wireless-2.6 cleanup
<philipp.gortan:tttech.com>:
o [netdrvr 8139cp] add PCI ID
Adrian Bunk:
o net/ieee80211/Kconfig: don't describe what gets selected
Alexander Viro:
o hostap __user annotations
Felipe Damasio:
o 8139cp net driver: add MODULE_VERSION
François Romieu:
o ieee80211: offset_in_page() removal
o ieee80211: C99 initialization for eap_types
o ieee80211: failure of ieee80211_crypto_init()
o 8139cp: SG support fixes
Greg Kroah-Hartman:
o net drivers: convert pci_dev->slot_name usage to pci_name()
Jeff Garzik:
o [netdrvr starfire] Add GPL'd firmware, remove compat code
o [wireless hostap] update for new pci_save_state()
o [netdrvr 8139cp] TSO support
Joshua Kwan:
o hostap: fix Kconfig typos and missing select CRYPTO
Jouni Malinen:
o Host AP: Replaced MODULE_PARM with module_param*
o Host AP: Replaced direct dev->priv references with netdev_priv(dev)
o Host AP: Updated to use Linux wireless extensions v17
o Host AP: pci_register_driver() return value changes
o Host AP: Fix netif_carrier_off() in non-client modes
o Host AP: Fix PRISM2_IO_DEBUG
o Host AP: Use void __iomem * with {read,write}{b,w}
o Host AP: Fix card enabling after firmware download
o Host AP: Do not bridge packets to unauthorized ports
o Host AP: Fix compilation with PRISM2_NO_STATION_MODES defined
o Host AP: Prevent STAs from associating using AP address
o Host AP: Fix hw address changing for wifi# interface
o Host AP: Remove ioctl debug messages
o Host AP: Ignore (Re)AssocResp messages silently
o Host AP: Fix interface packet counters
o Host AP: Disable EAPOL TX/RX debug messages
o fix hostap crypto bugs
o Add HostAP wireless driver
Olaf Kirch:
o natsemi: long cable, short cable
Pekka Enberg:
o 8139too: use iomap for pio/mmio
Steffen Klassert:
o 8139cp - add netpoll support
Stephen Hemminger:
o skge: change driver version
o skge: fix race with receive interrupt and NAPI
o skge: use lockless transmit
o skge: interrupt coalecsing related fixes
o skge: only allow tx/rx csum on Yukon chipset
o skge: use array for port irq masks
o skge: use chip MIB stats for packet and byte counts
o skge: simplify definition of wake on lan support
o skge: suspend/resume related state management
o skge: remove unneeded include's
o skge: spelling and whitespace
o skge: use PFX string
o skge driver (0.5)
o 8139cp - module_param
next reply other threads:[~2005-03-10 5:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-10 5:37 Jeff Garzik [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-08-24 6:57 netdev-2.6 queue updated Jeff Garzik
2005-03-23 3:32 Jeff Garzik
2005-03-23 7:55 ` bert hubert
2005-03-23 8:57 ` Jeff Garzik
2005-03-03 7:31 Jeff Garzik
2005-03-03 20:20 ` Daniel Drake
2005-03-04 5:11 ` Jeff Garzik
2005-02-13 20:38 Jeff Garzik
2005-01-28 0:00 Jeff Garzik
2005-01-28 2:15 ` Andy Isaacson
2005-01-28 2:31 ` Jeff Garzik
2005-01-07 11:34 Jeff Garzik
2005-01-07 19:04 ` Francois Romieu
2005-01-07 19:11 ` Jeff Garzik
2004-11-05 10:02 Jeff Garzik
2004-10-16 1:00 Jeff Garzik
2004-10-20 17:48 ` Olaf Hering
2004-10-20 22:33 ` Jeff Garzik
2004-10-01 4:59 Jeff Garzik
2004-09-20 19:48 Jeff Garzik
2004-09-20 20:14 ` Arkadiusz Miskiewicz
2004-09-20 20:31 ` Jeff Garzik
2004-09-20 20:38 ` Arkadiusz Miskiewicz
2004-08-29 1:00 Jeff Garzik
2004-07-27 19:05 Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=422FDD07.9060808@pobox.com \
--to=jgarzik@pobox.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).