From: Richard Dawe <rich@phekda.gotadsl.co.uk>
To: Stephen Hemminger <shemminger@osdl.org>
Cc: Francois Romieu <romieu@fr.zoreil.com>, netdev@oss.sgi.com
Subject: Re: [PATCH 4/5] r8169: ethtool message level control
Date: Sat, 12 Mar 2005 12:30:44 +0000 [thread overview]
Message-ID: <4232E0F4.8020103@phekda.gotadsl.co.uk> (raw)
In-Reply-To: <20050309113402.05d25e49@dxpl.pdx.osdl.net>
Hello.
Stephen Hemminger wrote:
> Add ethtool message level control support. This is the standard way
> to enable/disable console log messages. Also, ratelimit the too much
> work at interrupt message, so if under massive packet load the console
> doesn't get flooded.
[snip]
Works fine for me on my Athlon64 laptop with a 8169 with built-in PHY.
Testing:
* Remove Ethernet cable, insert module (no params), then
"/etc/init.d/network start". Check I get the "PHY reset until link up"
message.
* "ethtool -s eth0 msglvl 0". Restart networking. Check I get no PHY
reset message.
* Remove module. Reinsert module with "debug=16" param. Restart
networking. Check I get PHY reset message plus chip info in dmesg.
* Insert cable, restart networking.
Bye, Rich =]
--
Richard Dawe [ http://homepages.nildram.co.uk/~phekda/richdawe/ ]
"You can't evaluate a man by logic alone."
-- McCoy, "I, Mudd", Star Trek
prev parent reply other threads:[~2005-03-12 12:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-09 19:34 [PATCH 4/5] r8169: ethtool message level control Stephen Hemminger
2005-03-09 19:50 ` Jeff Garzik
2005-03-12 12:02 ` Richard Dawe
2005-03-12 14:33 ` Francois Romieu
2005-03-12 15:12 ` Richard Dawe
2005-03-12 12:30 ` Richard Dawe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4232E0F4.8020103@phekda.gotadsl.co.uk \
--to=rich@phekda.gotadsl.co.uk \
--cc=netdev@oss.sgi.com \
--cc=romieu@fr.zoreil.com \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).