* [Fwd: Re: r8169 native module problems on 2.6.11]
@ 2005-04-10 18:11 TommyDrum
2005-04-11 7:09 ` Francois Romieu
0 siblings, 1 reply; 2+ messages in thread
From: TommyDrum @ 2005-04-10 18:11 UTC (permalink / raw)
To: netdev
[-- Attachment #1: Type: text/plain, Size: 2781 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Forwarded because I forgot to Cc: it... (sorry)
O/H Francois Romieu ÎγÏ?αÏÆε:
|>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
|>eth0: Identified chip type is 'RTL8169s/8110s'.
|>eth0: U.S. Robotics 10/100/1000 PCI NIC driver version 2.0 at
|
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|>0xe08ee000, 00:c0:49:f2:86:1e, IRQ 11
|>eth0: Auto-negotiation Enabled.
|
|
| Can you check that the message above is _really_ the output of your
| native kernel ? I have not checked gentoo's sources but the real vanilla
| kernel can not issue this string.
|
Sorry, my mistake... the output above was from a modprobe of the same
external module. I was confused because the kernel doesn't show like its
native module is present anyway, even when modprobed (as you can see
from the info you requested).
| You can send for both working/non-working after module insertion (wait
| for a few seconds):
| - complete dmesg (the beginning of it could be in /var/log/dmesg or such)
dmesg_native is the kernel's native r8169 module dmesg, while
dmesg_external is the external module dmesg provided by usr cd.
| - lspci -vx
| - lsmod
| - ifconfig -a
| - ethtool eth0
| - cat /proc/interrupts
All follow the same naming scheme as you can see from attached messages.
I noticed that the kernel totally ignores native module r8169, even if
it shows it as modprobed in lsmod. All logs were taken in two separate
reboots.
| - source code
Did you mean the source code of the external module? It's the
r8169_external.tar.gz file. Modinfo says it's GPL'ed, but I didn't find
any notice of it in the cdrom.
| - brand name of the motherboard
It's a Supermicro 370SDA which accepts pentium celeron and pentium III's
up to 1GHz (socket 370). There's a pIII 933 mounted on it.
| - the name given by USR to the adapter (check the box)
It's referred to as "High-Performance 10/100/1000Mbps Desktop/Server
Networking Model 7902". The part number is USR997902 "PCI NIC ASSEMBLED
IN CHINA IN 2004".
| I do not mind if the info is mailed, available on some web site or stuffed
| at bugzilla.kernel.org. Please Cc: netdev@oss.sgi.com on further messages.
Ehmm.... I'm not sure if I have to Cc: this message to
netdev@oss.sgi.com together with attached files... please say so if
needed. Oh, mind that I'm not subscribed to the linux-kernel mailing
list. Ciao!
TIA,
Tommy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCWWw4gpUvhTIUBAERAhFsAJ9VJRmWH0IwnbYZ52n7rBnJwNm46ACeJl6d
GiunYz3TC3+eUx/gi7T2Rmg=
=jGck
-----END PGP SIGNATURE-----
[-- Attachment #2: dmesg_external --]
[-- Type: text/plain, Size: 9731 bytes --]
Linux version 2.6.11-gentoo-r5 (root@Pitagora) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 Wed Apr 6 05:09:01 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f6bc0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.11-r5 ro root=341 no-hlt root=/dev/hdb3 init=/linuxrc video=aty128fb:accel,1280x1024@16
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 933.275 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514228k/524224k available (3067k kernel code, 9440k reserved, 1043k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1839.10 BogoMIPS (lpj=919552)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
ACPI: setting ELCR to 0200 (from 1e20)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
inotify device minor=63
NTFS driver 2.1.22 [Flags: R/W].
Initializing Cryptographic API
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Pro 266 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf0000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12
[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 Pro Ultra TF
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12
aty128fb: Found Intel x86 BIOS ROM Image
aty128fb: Rage128 BIOS located
aty128fb: Rage128 TF Ultra AGP [chip rev 0x4] 32M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 160x64
fb0: ATY Rage128 frame buffer device on Rage128 TF Ultra AGP
aty128fb: Rage128 MTRR set to ON
ACPI: Power Button (FF) [PWRF]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: Thermal Zone [THRM] (0 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PC Speaker
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: ST38410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3 hda4
hdb: max request size: 128KiB
hdb: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63, UDMA(66)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ALSA device list:
#0: Sound Fusion CS46xx at 0xfb102000/0xfb000000, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 LAN0 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k freed
kjournald starting. Commit interval 5 seconds
Adding 506016k swap on /dev/hdb2. Priority:1 extents:1
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb3, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 10, io base 0xd800
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:11.3: irq 10, io base 0xdc00
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: U.S. Robotics 10/100/1000 PCI NIC driver version 2.0 at 0xe0892000, 00:c0:49:f2:86:1e, IRQ 11
eth0: Auto-negotiation Enabled.
usb 1-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [04b4:0001] on usb-0000:00:11.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[-- Attachment #3: dmesg_native --]
[-- Type: text/plain, Size: 9283 bytes --]
Linux version 2.6.11-gentoo-r5 (root@Pitagora) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 Wed Apr 6 05:09:01 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f6bc0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.11-r5 ro root=341 no-hlt root=/dev/hdb3 init=/linuxrc video=aty128fb:accel,1280x1024@16
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 933.275 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514228k/524224k available (3067k kernel code, 9440k reserved, 1043k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1839.10 BogoMIPS (lpj=919552)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
ACPI: setting ELCR to 0200 (from 1e20)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
inotify device minor=63
NTFS driver 2.1.22 [Flags: R/W].
Initializing Cryptographic API
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Pro 266 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf0000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12
[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 Pro Ultra TF
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12
aty128fb: Found Intel x86 BIOS ROM Image
aty128fb: Rage128 BIOS located
aty128fb: Rage128 TF Ultra AGP [chip rev 0x4] 32M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 160x64
fb0: ATY Rage128 frame buffer device on Rage128 TF Ultra AGP
aty128fb: Rage128 MTRR set to ON
ACPI: Power Button (FF) [PWRF]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: Thermal Zone [THRM] (0 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PC Speaker
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: ST38410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3 hda4
hdb: max request size: 128KiB
hdb: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63, UDMA(66)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ALSA device list:
#0: Sound Fusion CS46xx at 0xfb102000/0xfb000000, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 LAN0 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k freed
kjournald starting. Commit interval 5 seconds
Adding 506016k swap on /dev/hdb2. Priority:1 extents:1
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb3, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 10, io base 0xd800
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:11.3: irq 10, io base 0xdc00
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: USB HID v1.00 Mouse [04b4:0001] on usb-0000:00:11.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
[-- Attachment #4: ethtool_external --]
[-- Type: text/plain, Size: 37 bytes --]
Settings for eth0:
No data available
[-- Attachment #5: ethtool_native --]
[-- Type: text/plain, Size: 210 bytes --]
Settings for eth0:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available
[-- Attachment #6: ifconfig_external --]
[-- Type: text/plain, Size: 809 bytes --]
eth0 Link encap:Ethernet HWaddr 00:C0:49:F2:86:1E
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:7182 (7.0 Kb)
Interrupt:11 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 b) TX bytes:100 (100.0 b)
[-- Attachment #7: ifconfig_native --]
[-- Type: text/plain, Size: 354 bytes --]
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 b) TX bytes:100 (100.0 b)
[-- Attachment #8: lsmod_external --]
[-- Type: text/plain, Size: 185 bytes --]
Module Size Used by
usbhid 34464 0
r8169 15008 0
uhci_hcd 33104 0
usbcore 122200 3 usbhid,uhci_hcd
[-- Attachment #9: lsmod_native --]
[-- Type: text/plain, Size: 185 bytes --]
Module Size Used by
usbhid 34464 0
r8169 25516 0
uhci_hcd 33104 0
usbcore 122200 3 usbhid,uhci_hcd
[-- Attachment #10: lspcivx_external --]
[-- Type: text/plain, Size: 5498 bytes --]
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266] (rev 01)
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, medium devsel, latency 8
Memory at f0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00: 06 11 91 30 06 00 10 22 01 00 00 06 00 08 00 00
10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
Capabilities: [80] Power Management version 2
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c0 c0 00 00
20: 00 f8 f0 f9 00 f4 f0 f7 00 00 00 00 d9 15 66 18
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
0000:00:08.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: Hercules: Unknown device a010
Flags: bus master, slow devsel, latency 32, IRQ 5
Memory at fb102000 (32-bit, non-prefetchable)
Memory at fb000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 20 00 00
10: 00 20 10 fb 00 00 00 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 81 16 10 a0
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 04 18
0000:00:09.0 Ethernet controller: U.S. Robotics USR997902 10/100/1000 Mbps PCI Network Card (rev 10)
Subsystem: U.S. Robotics USR997902 10/100/1000 Mbps PCI Network Card
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
I/O ports at d000
Memory at fb103000 (32-bit, non-prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
00: ec 16 16 01 07 00 b0 02 10 00 00 02 08 20 00 00
10: 01 d0 00 00 00 30 10 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 16 16 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 20 40
0000:00:0a.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 6834
Flags: bus master, slow devsel, latency 32, IRQ 10
Memory at fb100000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
00: 14 18 01 02 07 00 10 04 01 00 80 02 08 20 00 00
10: 00 00 10 fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 06 00 00 62 14 34 68
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, medium devsel, latency 32
I/O ports at d400 [size=16]
Capabilities: [c0] Power Management version 2
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 12
Memory at f4000000 (32-bit, prefetchable)
I/O ports at c000 [size=256]
Memory at f9000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
00: 02 10 46 54 87 00 b0 02 00 00 00 03 08 20 00 00
10: 08 00 00 f4 01 c0 00 00 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 18 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 08 00
[-- Attachment #11: lspcivx_native --]
[-- Type: text/plain, Size: 5498 bytes --]
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266] (rev 01)
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, medium devsel, latency 8
Memory at f0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00: 06 11 91 30 06 00 10 22 01 00 00 06 00 08 00 00
10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
Capabilities: [80] Power Management version 2
00: 06 11 91 b0 07 00 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c0 c0 00 00
20: 00 f8 f0 f9 00 f4 f0 f7 00 00 00 00 d9 15 66 18
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
0000:00:08.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: Hercules: Unknown device a010
Flags: bus master, slow devsel, latency 32, IRQ 5
Memory at fb102000 (32-bit, non-prefetchable)
Memory at fb000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 20 00 00
10: 00 20 10 fb 00 00 00 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 81 16 10 a0
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 04 18
0000:00:09.0 Ethernet controller: U.S. Robotics USR997902 10/100/1000 Mbps PCI Network Card (rev 10)
Subsystem: U.S. Robotics USR997902 10/100/1000 Mbps PCI Network Card
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
I/O ports at d000
Memory at fb103000 (32-bit, non-prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
00: ec 16 16 01 07 00 b0 02 10 00 00 02 08 20 00 00
10: 01 d0 00 00 00 30 10 fb 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 16 16 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 20 40
0000:00:0a.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 6834
Flags: bus master, slow devsel, latency 32, IRQ 10
Memory at fb100000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
00: 14 18 01 02 07 00 10 04 01 00 80 02 08 20 00 00
10: 00 00 10 fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 06 00 00 62 14 34 68
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00: 06 11 74 30 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc: Unknown device 1866
Flags: bus master, medium devsel, latency 32
I/O ports at d400 [size=16]
Capabilities: [c0] Power Management version 2
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 d9 15 66 18
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 18 00 03 0c 08 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 12
Memory at f4000000 (32-bit, prefetchable)
I/O ports at c000 [size=256]
Memory at f9000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
00: 02 10 46 54 87 00 b0 02 00 00 00 03 08 20 00 00
10: 08 00 00 f4 01 c0 00 00 00 00 00 f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 18 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 08 00
[-- Attachment #12: procinterrupts_external --]
[-- Type: text/plain, Size: 456 bytes --]
CPU0
0: 291227 XT-PIC timer
1: 1521 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC CS46XX
8: 2 XT-PIC rtc
9: 1 XT-PIC acpi
10: 90 XT-PIC uhci_hcd, uhci_hcd
11: 16 XT-PIC eth0
14: 2511 XT-PIC ide0
15: 48 XT-PIC ide1
NMI: 0
ERR: 0
[-- Attachment #13: procinterrupts_native --]
[-- Type: text/plain, Size: 458 bytes --]
CPU0
0: 788943 XT-PIC timer
1: 2185 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC CS46XX
6: 32 XT-PIC floppy
8: 2 XT-PIC rtc
9: 1 XT-PIC acpi
10: 2201 XT-PIC uhci_hcd, uhci_hcd
14: 12762 XT-PIC ide0
15: 48 XT-PIC ide1
NMI: 0
ERR: 0
[-- Attachment #14: r8169_external.tar.gz --]
[-- Type: application/gzip, Size: 13590 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-04-11 7:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-10 18:11 [Fwd: Re: r8169 native module problems on 2.6.11] TommyDrum
2005-04-11 7:09 ` Francois Romieu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).