--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
 obj-$(CONFIG_NET_PCMCIA) += pcmcia/
-obj-$(CONFIG_NET_WIRELESS) += wireless/
+obj-$(CONFIG_NET_RADIO) += wireless/
 obj-$(CONFIG_NET_TULIP) += tulip/
 obj-$(CONFIG_HAMRADIO) += hamradio/
 obj-$(CONFIG_IRDA) += irda/
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_o
 static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct ocp_enet_private *fep = dev->priv;
-	uint *data = (uint *) & rq->ifr_ifru;
+	uint16_t *data = (uint16_t *) & rq->ifr_ifru;
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_devic
 			if (entry != 0) {
 				/* Avoid a chip errata by prefixing a dummy entry. Don't do
 				   this on the ULI526X as it triggers a different problem */
-				if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
+				if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
 					tp->tx_buffers[entry].skb = NULL;
 					tp->tx_buffers[entry].mapping = 0;
 					tp->tx_ring[entry].length =
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -323,7 +323,7 @@ config PRISM54
 	  For a complete list of supported cards visit <http://prism54.org>.
 	  Here is the latest confirmed list of supported cards:
 
-	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
 	  Allnet ALL0271 PCI Card
 	  Compex WL54G Cardbus Card
 	  Corega CG-WLCB54GT Cardbus Card