Re: BCM5704 performance questions.

[Ben Greear <greearb@candelatech.com>]

Michael Chan wrote:
> On Thu, 2005-06-09 at 17:38 -0700, Ben Greear wrote:
> 
>>*  Is the BCM5704 chipset/driver really that much slower?
>>
> Unfortunately, the 5704 requires the "ONE_DMA" workaround which will
> limit throughput in a PCIX 100/133 bus. If you comment out the line that
> sets the DMA_RWCTRL_ONE_DMA flag in tg3.c, you should see improved
> performance. However, you may run into some DMA issues on certain
> systems.

Is there any way I can tell which systems are affected?  It won't be
an option for me to purposefully ship possibly busted drivers/hardware,
but if I can be certain that my systems are immune, I will try this
modification.

>>*  Is there some information on tuning the tg3 somewhere?
>>    (I didn't see a Documentation/networking/tg3.txt file, for instance)
>>
>>*  Is there a way to verify the bus speed that the NIC is running at?
>>    (ethtool -d ethX gives lots of meaningless (to me) hex)
>>
> 
> 
> tg3 probing string for each device will tell you the bus type, width,
> and speed.

Thanks, I found it.

Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com