Re: [PATCH 2/3] net/mlx5e: make VXLAN support conditional

[Arnd Bergmann <arnd@arndb.de>]

On Thursday 05 May 2016 19:44:36 Saeed Mahameed wrote:
> On Wed, May 4, 2016 at 3:31 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > VXLAN can be disabled at compile-time or it can be a loadable
> > module while mlx5 is built-in, which leads to a link error:
> >
> > drivers/net/built-in.o: In function `mlx5e_create_netdev':
> > ntb_netdev.c:(.text+0x106de4): undefined reference to `vxlan_get_rx_port'
> >
> > This avoids the link error and makes the vxlan code optional,
> > like the other ethernet drivers do as well.
> >
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Link: https://patchwork.ozlabs.org/patch/589296/
> > Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
> > ---
> > I sent it originally on Feb 26 2016, but misread Saeed Mahameed's
> > reply as saying that he'd fix it up himself. The new version
> > should address the original comment.
> > ---
> 
> Hi Arnd,
> 
> I didn't post a fix up since it is not needed anymore, see
> b7aade15485a ('vxlan: break dependency with netdev drivers') in
> net-next.
> 
> The new issue is introduced due to : "net/mlx5: Kconfig: Fix
> MLX5_EN/VXLAN build issue" which was merged from net tree.
> 
> Dave shouldn't have merged it into net-next, I explicitly asked him
> that in the cover letter.  Maybe he missed it.
> 
> I just checked and It is sufficient to only take the revert patch:
> [PATCH 1/3] Revert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"
> to net-next.
> 
> Can you please confirm that with only the revert patch, you don't see
> the issue ?

Yes, it works, but not it is different from all the other drivers
(MLX4, BENET, IXGBE, I40E, FM10K, QLCNIC, and QEDE). If the 'select
VXLAN' is not the preferred way to handle this, we should change
the other ones the same way, right?

For reference, I've tried it out on the MLX4 driver, and it does
seem nicer that way, see below.

	Arnd
---
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
in case someone wants to pick up that patch and do the other
ones as well.

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 9ca3734ebb6b..88fff4484200 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -6,6 +6,7 @@ config MLX4_EN
 	tristate "Mellanox Technologies 1/10/40Gbit Ethernet support"
 	depends on MAY_USE_DEVLINK
 	depends on PCI
+	select VXLAN
 	select MLX4_CORE
 	select PTP_1588_CLOCK
 	---help---
@@ -24,13 +25,6 @@ config MLX4_EN_DCB
 
 	  If unsure, set to Y
 
-config MLX4_EN_VXLAN
-	bool "VXLAN offloads Support"
-	default y
-	depends on MLX4_EN && VXLAN && !(MLX4_EN=y && VXLAN=m)
-	---help---
-	  Say Y here if you want to use VXLAN offloads in the driver.
-
 config MLX4_CORE
 	tristate
 	depends on PCI
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 6f28ac58251c..ad887c425f2d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1691,10 +1691,8 @@ int mlx4_en_start_port(struct net_device *dev)
 	/* Schedule multicast task to populate multicast list */
 	queue_work(mdev->workqueue, &priv->rx_mode_task);
 
-#ifdef CONFIG_MLX4_EN_VXLAN
 	if (priv->mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
 		vxlan_get_rx_port(dev);
-#endif
 	priv->port_up = true;
 	netif_tx_start_all_queues(dev);
 	netif_device_attach(dev);
@@ -2337,7 +2335,6 @@ static int mlx4_en_get_phys_port_id(struct net_device *dev,
 	return 0;
 }
 
-#ifdef CONFIG_MLX4_EN_VXLAN
 static void mlx4_en_add_vxlan_offloads(struct work_struct *work)
 {
 	int ret;
@@ -2448,7 +2445,6 @@ static netdev_features_t mlx4_en_features_check(struct sk_buff *skb,
 
 	return features;
 }
-#endif
 
 static int mlx4_en_set_tx_maxrate(struct net_device *dev, int queue_index, u32 maxrate)
 {
@@ -2501,11 +2497,9 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_rx_flow_steer	= mlx4_en_filter_rfs,
 #endif
 	.ndo_get_phys_port_id	= mlx4_en_get_phys_port_id,
-#ifdef CONFIG_MLX4_EN_VXLAN
 	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
 	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
 	.ndo_features_check	= mlx4_en_features_check,
-#endif
 	.ndo_set_tx_maxrate	= mlx4_en_set_tx_maxrate,
 };
 
@@ -2539,11 +2533,9 @@ static const struct net_device_ops mlx4_netdev_ops_master = {
 	.ndo_rx_flow_steer	= mlx4_en_filter_rfs,
 #endif
 	.ndo_get_phys_port_id	= mlx4_en_get_phys_port_id,
-#ifdef CONFIG_MLX4_EN_VXLAN
 	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
 	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
 	.ndo_features_check	= mlx4_en_features_check,
-#endif
 	.ndo_set_tx_maxrate	= mlx4_en_set_tx_maxrate,
 };
 
@@ -2834,10 +2826,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
 	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
-#ifdef CONFIG_MLX4_EN_VXLAN
 	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
 	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
-#endif
 #ifdef CONFIG_RFS_ACCEL
 	INIT_LIST_HEAD(&priv->filters);
 	spin_lock_init(&priv->filters_lock);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 63b1aeae2c03..cbab8741d60f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -546,10 +546,8 @@ struct mlx4_en_priv {
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
 	struct delayed_work service_task;
-#ifdef CONFIG_MLX4_EN_VXLAN
 	struct work_struct vxlan_add_task;
 	struct work_struct vxlan_del_task;
-#endif
 	struct mlx4_en_perf_stats pstats;
 	struct mlx4_en_pkt_stats pkstats;
 	struct mlx4_en_counter_stats pf_stats;