From: Daniel Drake <dsd@gentoo.org>
To: prism54-private@prism54.org
Cc: netdev@vger.kernel.org, netfilter-devel@lists.netfilter.org
Subject: prism54 vs netfilter problem? Badness in local_bh_enable at kernel/softirq.c:140
Date: Wed, 31 Aug 2005 12:53:23 +0100 [thread overview]
Message-ID: <43159A33.8010600@gentoo.org> (raw)
Hi,
A gentoo user reported these messages on boot:
eth0: resetting device...
eth0: uploading firmware...
eth0: firmware version: 1.0.4.3
eth0: firmware upload complete
eth0: interface reset complete
spurious 8259A interrupt: IRQ7.
eth0: islpci_close ()
eth0: resetting device...
eth0: uploading firmware...
eth0: firmware version: 1.0.4.3
eth0: firmware upload complete
eth0: interface reset complete
Badness in local_bh_enable at kernel/softirq.c:140
[<c0125f9f>] local_bh_enable+0x8f/0xa0
[<c03a71b9>] destroy_conntrack+0xd9/0xf0
[<c0357d8a>] __kfree_skb+0x7a/0xf0
[<c79181fa>] islpci_eth_transmit+0x15a/0x380 [prism54]
[<c035d692>] dev_queue_xmit_nit+0xd2/0x140
[<c036b04e>] qdisc_restart+0x15e/0x200
[<c035dabf>] dev_queue_xmit+0x1cf/0x270
[<c0363b23>] neigh_resolve_output+0xd3/0x1d0
[<c03636f6>] neigh_update+0x2a6/0x350
[<c0397963>] arp_process+0x1c3/0x570
[<c036902e>] nf_hook_slow+0x7e/0x140
[<c03977a0>] arp_process+0x0/0x570
[<c0397e12>] arp_rcv+0x102/0x180
[<c03977a0>] arp_process+0x0/0x570
[<c035e0a8>] netif_receive_skb+0x148/0x1d0
[<c035e1c9>] process_backlog+0x99/0x130
[<c035e2e1>] net_rx_action+0x81/0x110
[<c0125eb6>] __do_softirq+0xd6/0xf0
[<c0125f05>] do_softirq+0x35/0x40
[<c0125ff5>] irq_exit+0x45/0x50
[<c0105aee>] do_IRQ+0x1e/0x30
[<c0103d72>] common_interrupt+0x1a/0x20
[<c0277a26>] acpi_processor_idle+0x126/0x270
[<c0101110>] cpu_idle+0x70/0x80
[<c04f6959>] start_kernel+0x169/0x190
[<c04f6370>] unknown_bootoption+0x0/0x1d0
Badness in local_bh_enable at kernel/softirq.c:140
[<c0125f9f>] local_bh_enable+0x8f/0xa0
[<c03a717a>] destroy_conntrack+0x9a/0xf0
[<c0357d8a>] __kfree_skb+0x7a/0xf0
[<c79181fa>] islpci_eth_transmit+0x15a/0x380 [prism54]
[<c035d692>] dev_queue_xmit_nit+0xd2/0x140
[<c036b04e>] qdisc_restart+0x15e/0x200
[<c035dabf>] dev_queue_xmit+0x1cf/0x270
[<c0363b23>] neigh_resolve_output+0xd3/0x1d0
[<c03636f6>] neigh_update+0x2a6/0x350
[<c0397963>] arp_process+0x1c3/0x570
[<c036902e>] nf_hook_slow+0x7e/0x140
[<c03977a0>] arp_process+0x0/0x570
[<c0397e12>] arp_rcv+0x102/0x180
[<c03977a0>] arp_process+0x0/0x570
[<c035e0a8>] netif_receive_skb+0x148/0x1d0
[<c035e1c9>] process_backlog+0x99/0x130
[<c035e2e1>] net_rx_action+0x81/0x110
[<c0125eb6>] __do_softirq+0xd6/0xf0
[<c0125f05>] do_softirq+0x35/0x40
[<c0125ff5>] irq_exit+0x45/0x50
[<c0105aee>] do_IRQ+0x1e/0x30
[<c0103d72>] common_interrupt+0x1a/0x20
[<c0277a26>] acpi_processor_idle+0x126/0x270
[<c0101110>] cpu_idle+0x70/0x80
[<c04f6959>] start_kernel+0x169/0x190
[<c04f6370>] unknown_bootoption+0x0/0x1d0
This isn't a reproducible problem and apparently everything worked fine even
after these messages had appeared. Just thought I should point out that
something isn't quite right somewhere.
The Gentoo bug report is here:
http://bugs.gentoo.org/show_bug.cgi?id=103803
Something similar has been reported previously:
http://prism54.org/pipermail/prism54-users/2003-November/000083.html
http://prism54.org/pipermail/prism54-users/2003-November/000047.html
Hope this is useful.
Daniel
next reply other threads:[~2005-08-31 11:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-31 11:53 Daniel Drake [this message]
2005-08-31 16:10 ` prism54 vs netfilter problem? Badness in local_bh_enable at kernel/softirq.c:140 Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43159A33.8010600@gentoo.org \
--to=dsd@gentoo.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@lists.netfilter.org \
--cc=prism54-private@prism54.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).