From: Arnd Bergmann <arnd@arndb.de>
To: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>,
Srinivas Kandagatla <srinivas.kandagatla@st.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Hans de Goede <hdegoede@redhat.com>,
arm@kernel.org, Giuseppe Cavallaro <peppe.cavallaro@st.com>,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org
Subject: Re: stmmac-socfpga breakage in arm-soc
Date: Wed, 19 Mar 2014 15:05:57 +0100 [thread overview]
Message-ID: <4337501.shzGE38xmF@wuerfel> (raw)
In-Reply-To: <53299CA8.607@gmail.com>
On Wednesday 19 March 2014 08:33:28 Dinh Nguyen wrote:
> On 03/19/2014 07:33 AM, Arnd Bergmann wrote:
> >
> > * Replaced the parent/child DT nodes with a combined node
> > * Renamed the device node from 'ethernet0' to 'ethernet'
> > as the standard name.
> > * Removed interrupt-names and clock-names properties that
> > are not documented in the binding and not used.
> > * Added a new DWMAC_SOCFPGA Kconfig symbol to control
> > compilation of this driver
>
> The v1 of this patch had this had this Kconfig symbol and is
> similar to your proposed fix.
>
> http://marc.info/?l=linux-netdev&m=139167062725242&w=2
I don't understand. So you got parts of it right at first, but then
changed it in a different way from what Peppe asked you to do?
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > index 8fb32a8..46aef510 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > @@ -38,6 +38,9 @@ static const struct of_device_id stmmac_dt_ids[] = {
> > { .compatible = "st,stih416-dwmac", .data = &sti_gmac_data},
> > { .compatible = "st,stid127-dwmac", .data = &sti_gmac_data},
> > #endif
> > +#ifdef CONFIG_DWMAC_SOCFPGA
> > + { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
> > +#endif
> > /* SoC specific glue layers should come before generic bindings */
> > { .compatible = "st,spear600-gmac"},
> > { .compatible = "snps,dwmac-3.610"},
>
>
> If it's okay with you Arnd, can I take this patch and add on top of it
> as it is also breaking dtb builds:
>
> Error: arch/arm/boot/dts/socfpga_arria5_socdk.dts:51.2-3 label or path,
> 'ethernet1', not found
> FATAL ERROR: Syntax error parsing input tree
> Error: arch/arm/boot/dts/socfpga_cyclone5_socdk.dts:44.2-3 label or
> path, 'ethernet1', not found
> FATAL ERROR: Syntax error parsing input tree
> make[1]: *** [arch/arm/boot/dts/socfpga_arria5_socdk.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make[1]: *** [arch/arm/boot/dts/socfpga_cyclone5_socdk.dtb] Error 1
> Error: arch/arm/boot/dts/socfpga_cyclone5_sockit.dts:44.2-3 label or
> path, 'ethernet1', not found
> FATAL ERROR: Syntax error parsing input tree
> make[1]: *** [arch/arm/boot/dts/socfpga_cyclone5_sockit.dtb] Error 1
> Error: arch/arm/boot/dts/socfpga_vt.dts:92.2-3 label or path,
> 'ethernet0', not found
I have found the same problems and fixed it up locally already with
the additional change below.
Arnd
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 2d6b38b..a87ee1c 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -46,11 +46,8 @@
};
};
-ðernet1 {
- status = "okay";
-};
-
&gmac1 {
+ status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 26c63a0..ae16d97 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -39,11 +39,8 @@
};
};
-ðernet1 {
- status = "okay";
-};
-
&gmac1 {
+ status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 469bb5c..b79e2a2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -39,11 +39,8 @@
};
};
-ðernet1 {
- status = "okay";
-};
-
&gmac1 {
+ status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 91f6ccf..0f33f2f 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -87,10 +87,7 @@
};
};
-ðernet0 {
- status = "okay";
-};
-
&gmac0 {
+ status = "okay";
phy-mode = "gmii";
};
next prev parent reply other threads:[~2014-03-19 14:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-19 12:33 stmmac-socfpga breakage in arm-soc Arnd Bergmann
2014-03-19 13:33 ` Dinh Nguyen
2014-03-19 14:05 ` Arnd Bergmann [this message]
2014-03-19 14:20 ` Dinh Nguyen
[not found] ` <5329A7A1.20606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-03-19 15:07 ` Arnd Bergmann
2014-03-24 9:15 ` srinivas kandagatla
2014-03-19 14:34 ` Dinh Nguyen
2014-03-19 14:58 ` Arnd Bergmann
2014-03-19 16:47 ` Emilio López
2014-03-21 17:51 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4337501.shzGE38xmF@wuerfel \
--to=arnd@arndb.de \
--cc=arm@kernel.org \
--cc=davem@davemloft.net \
--cc=dinguyen@altera.com \
--cc=dinh.linux@gmail.com \
--cc=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=srinivas.kandagatla@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox