00:00.0 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset) (rev 33)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.1 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
	Subsystem: Intel Corporation 82540EM Gigabit Ethernet Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (63750ns min), Cache Line Size 08
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d800 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device.
		Command: DPERE- ERO+ RBC=0 OST=0
		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000

00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
	Subsystem: ATI Technologies Inc Rage XL
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), Cache Line Size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at d400 [size=256]
	Region 2: Memory at f5800000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: [5c] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 ISA bridge: Broadcom CSB5 South Bridge (rev 93)
	Subsystem: Broadcom CSB5 South Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32

00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP])
	Subsystem: Broadcom CSB5 IDE Controller
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size 08
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at a800 [size=16]

00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
	Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]

00:0f.3 Host bridge: Broadcom CSB5 LPC bridge
	Subsystem: Broadcom: Unknown device 0230
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=4
		Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=4, DMCRS=0, RSCEM-

00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Capabilities: [60] PCI-X non-bridge device.
		Command: DPERE- ERO- RBC=0 OST=4
		Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=0, DMOST=4, DMCRS=0, RSCEM-

01:02.0 Ethernet controller: Intel Corporation 82544GC Gigabit Ethernet Controller (LOM) (rev 02)
	Subsystem: Intel Corporation 82544GC Based Network Connection
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (63750ns min), Cache Line Size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a400 [size=32]
	Expansion ROM at feae0000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device.
		Command: DPERE- ERO+ RBC=0 OST=0
		Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000

01:03.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
	Subsystem: LSI Logic / Symbios Logic MegaRAID ZCR SCSI 320-0 Controller
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32, Cache Line Size 08
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	[virtual] Expansion ROM at c4000000 [disabled] [size=32K]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-