From: shaozhengchao <shaozhengchao@huawei.com>
To: Paolo Abeni <pabeni@redhat.com>, <netdev@vger.kernel.org>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<dsahern@kernel.org>
Cc: <hkchu@google.com>, <weiyongjun1@huawei.com>, <yuehaibing@huawei.com>
Subject: Re: [PATCH net,v2] tcp: make sure init the accept_queue's spinlocks once
Date: Wed, 17 Jan 2024 10:52:18 +0800 [thread overview]
Message-ID: <444d4d17-a936-3c52-7f0c-85022e89ea29@huawei.com> (raw)
In-Reply-To: <0b0af55211d1ab8884c01e667f8bb5f8972c1622.camel@redhat.com>
On 2024/1/16 18:26, Paolo Abeni wrote:
> On Sat, 2024-01-13 at 11:07 +0800, Zhengchao Shao wrote:
>> When I run syz's reproduction C program locally, it causes the following
>> issue:
>> pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!
>> WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
>> Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
>> RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
>> Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7
>> 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90
>> RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282
>> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908
>> RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900
>> RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff
>> R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000
>> R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000
>> FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000
>> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0
>> Call Trace:
>> <IRQ>
>> _raw_spin_unlock (kernel/locking/spinlock.c:186)
>> inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321)
>> inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358)
>> tcp_check_req (net/ipv4/tcp_minisocks.c:868)
>> tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260)
>> ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
>> ip_local_deliver_finish (net/ipv4/ip_input.c:234)
>> __netif_receive_skb_one_core (net/core/dev.c:5529)
>> process_backlog (./include/linux/rcupdate.h:779)
>> __napi_poll (net/core/dev.c:6533)
>> net_rx_action (net/core/dev.c:6604)
>> __do_softirq (./arch/x86/include/asm/jump_label.h:27)
>> do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
>> </IRQ>
>> <TASK>
>> __local_bh_enable_ip (kernel/softirq.c:381)
>> __dev_queue_xmit (net/core/dev.c:4374)
>> ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235)
>> __ip_queue_xmit (net/ipv4/ip_output.c:535)
>> __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
>> tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469)
>> tcp_rcv_state_process (net/ipv4/tcp_input.c:6657)
>> tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929)
>> __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968)
>> release_sock (net/core/sock.c:3536)
>> inet_wait_for_connect (net/ipv4/af_inet.c:609)
>> __inet_stream_connect (net/ipv4/af_inet.c:702)
>> inet_stream_connect (net/ipv4/af_inet.c:748)
>> __sys_connect (./include/linux/file.h:45 net/socket.c:2064)
>> __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070)
>> do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82)
>> entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
>> RIP: 0033:0x7fa10ff05a3d
>> Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
>> c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
>> RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
>> RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d
>> RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
>> RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000
>> R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640
>> R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20
>> </TASK>
>>
>> The issue triggering process is analyzed as follows:
>> Thread A Thread B
>> tcp_v4_rcv //receive ack TCP packet inet_shutdown
>> tcp_check_req tcp_disconnect //disconnect sock
>> ... tcp_set_state(sk, TCP_CLOSE)
>> inet_csk_complete_hashdance ...
>> inet_csk_reqsk_queue_add inet_listen //start listen
>> spin_lock(&queue->rskq_lock) inet_csk_listen_start
>> ... reqsk_queue_alloc
>> ... spin_lock_init
>> spin_unlock(&queue->rskq_lock) //warning
>>
>> When the socket receives the ACK packet during the three-way handshake,
>> it will hold spinlock. And then the user actively shutdowns the socket
>> and listens to the socket immediately, the spinlock will be initialized.
>> When the socket is going to release the spinlock, a warning is generated.
>> Also the same issue to fastopenq.lock.
>>
>> Add 'init_done' to make sure init the accept_queue's spinlocks once.
>>
>> Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue")
>> Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
>> Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
>> ---
>> v2: Add 'init_done' to make sure init the accept_queue's spinlocks once.
>> ---
>> include/net/request_sock.h | 1 +
>> net/core/request_sock.c | 7 +++++--
>> net/ipv4/tcp.c | 1 +
>> 3 files changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/net/request_sock.h b/include/net/request_sock.h
>> index 144c39db9898..0054746fe92d 100644
>> --- a/include/net/request_sock.h
>> +++ b/include/net/request_sock.h
>> @@ -175,6 +175,7 @@ struct fastopen_queue {
>> struct request_sock_queue {
>> spinlock_t rskq_lock;
>> u8 rskq_defer_accept;
>> + bool init_done;
>>
>> u32 synflood_warned;
>> atomic_t qlen;
>> diff --git a/net/core/request_sock.c b/net/core/request_sock.c
>> index f35c2e998406..51fe631a4af2 100644
>> --- a/net/core/request_sock.c
>> +++ b/net/core/request_sock.c
>> @@ -33,9 +33,12 @@
>>
>> void reqsk_queue_alloc(struct request_sock_queue *queue)
>> {
>> - spin_lock_init(&queue->rskq_lock);
>> + if (!queue->init_done) {
>> + spin_lock_init(&queue->rskq_lock);
>> + spin_lock_init(&queue->fastopenq.lock);
>> + queue->init_done = true;
>> + }
>>
>> - spin_lock_init(&queue->fastopenq.lock);
>> queue->fastopenq.rskq_rst_head = NULL;
>> queue->fastopenq.rskq_rst_tail = NULL;
>> queue->fastopenq.qlen = 0;
>
> I looks like the last bits of reqsk_queue_alloc() could still race with
> a 3rd ack. Could the latter end-up touching a corrupted/unexpectedly
> zeroed fastopenq?
>
Hi Paolo:
I haven't been able to analyze the specific scenario yet. Can
you describe it in detail? Thank you.
Zhengchao Shao
> Cheers,
>
> Paolo
>
next prev parent reply other threads:[~2024-01-17 2:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-13 3:07 [PATCH net,v2] tcp: make sure init the accept_queue's spinlocks once Zhengchao Shao
2024-01-16 10:26 ` Paolo Abeni
2024-01-17 2:52 ` shaozhengchao [this message]
2024-01-16 10:38 ` Eric Dumazet
2024-01-17 2:48 ` shaozhengchao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=444d4d17-a936-3c52-7f0c-85022e89ea29@huawei.com \
--to=shaozhengchao@huawei.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=hkchu@google.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=weiyongjun1@huawei.com \
--cc=yuehaibing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox