From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Risenhoover Subject: general protection fault: last sysfs file: /class/vc/vcsa4/dev Date: Fri, 05 May 2006 16:37:06 -0700 Message-ID: <445BE1A2.9070209@daxsolutions.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from ws6-3.us4.outblaze.com ([205.158.62.199]:42469 "HELO ws6-3.us4.outblaze.com") by vger.kernel.org with SMTP id S1750756AbWEEXhE (ORCPT ); Fri, 5 May 2006 19:37:04 -0400 To: netdev@vger.kernel.org Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Subject: GPF on Dell machines From: Paul Risenhoover Date: Fri, 05 May 2006 09:37:34 -0700 To: linux-kernel@vger.kernel.org I've been getting the following error repeatedly on a number of machines in my server farm. Unfortunately, when this happens, the machine becomes completely inoperable and must be hard booted. These are dual-processor Dell X64 machines . Can anybody please help? How can I make this stop? Should I be posting this to the samba mailing list instead? May 3 12:35:04 neon kernel: general protection fault: 0000 [1] SMP May 3 12:35:04 neon kernel: last sysfs file: /class/vc/vcsa4/dev May 3 12:35:04 neon kernel: CPU 0 May 3 12:35:04 neon kernel: Modules linked in: smbfs ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core rfcomm l2cap bluetooth sunrpc pcmcia yenta_socket rsrc_nonstatic pcmcia_core video button battery ac e752x_edac edac_mc e1000 dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata sd_mod scsi_mod May 3 12:35:04 neon kernel: Pid: 21979, comm: smbiod Not tainted 2.6.16-1.2069_FC4smp #1 May 3 12:35:04 neon kernel: RIP: 0010:[] {:smbfs:smbiod+520} May 3 12:35:04 neon kernel: RSP: 0018:ffff810007013ee8 EFLAGS: 00010202 May 3 12:35:04 neon kernel: RAX: ffff203f1200b400 RBX: ffff81007fc8b400 RCX: ffff810007013ed4 May 3 12:35:04 neon kernel: RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 0000000000000001 May 3 12:35:04 neon kernel: RBP: 0000000000000000 R08: ffff810007012000 R09: 00000000000005a8 May 3 12:35:04 neon kernel: R10: 0000000000000002 R11: ffffffff80316311 R12: 0000000000000007 May 3 12:35:04 neon kernel: R13: ffff203f1200b400 R14: ffff81007da3e4c8 R15: ffff810007013ee8 May 3 12:35:04 neon kernel: FS: 00002aaaaadfd6e0(0000) GS:ffffffff8051e000(0000) knlGS:0000000000000000 May 3 12:35:04 neon kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 3 12:35:04 neon kernel: CR2: 00002aab32604000 CR3: 0000000008a5f000 CR4: 00000000000006e0 May 3 12:35:04 neon kernel: Process smbiod (pid: 21979, threadinfo ffff810007012000, task ffff81001b4cb7a0) May 3 12:35:04 neon kernel: Stack: 0000000000000000 ffff81001b4cb7a0 ffffffff8014a2b0 ffff810007013f00 May 3 12:35:04 neon kernel: ffff810007013f00 ffff810007013f58 ffff81001b4cb7a0 ffff81007c14ea00 May 3 12:35:04 neon kernel: ffff81007c14ea00 ffff8100698a3c58 May 3 12:35:04 neon kernel: Call Trace: {autoremove_wake_function+0} May 3 12:35:04 neon kernel: {child_rip+8} {:smbfs:smbiod+0} May 3 12:35:04 neon kernel: {child_rip+0} May 3 12:35:04 neon kernel: May 3 12:35:04 neon kernel: Code: 49 8b 45 00 4c 89 eb 49 81 fd e0 2b 2f 88 74 19 49 89 c5 e9 May 3 12:35:04 neon kernel: RIP {:smbfs:smbiod+520} RSP May 3 12:35:31 neon kernel: <5>smb_add_request: request [ffff810026493680, mid=765] timed out! --> DMESG BEGINS HERE <-- Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00) Linux version 2.6.16-1.2069_FC4smp (bhcompile@hs20-bc1-6.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Tue Mar 28 12:48:20 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data) BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 DELL ) @ 0x00000000000fd650 ACPI: RSDT (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd664 ACPI: FADT (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd6b0 ACPI: MADT (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd724 ACPI: SPCR (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c0 ACPI: HPET (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd810 ACPI: MCFG (v001 DELL PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd848 ACPI: DSDT (v001 DELL PESC1425 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007ffc0000 Bootmem setup node 0 0000000000000000-000000007ffc0000 On node 0 totalpages: 514768 DMA zone: 2767 pages, LIFO batch:0 DMA32 zone: 512001 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55 ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[64]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 64-87 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ffff000:60001000) Checking aperture... SMP: Allowing 4 CPUs, 0 hotplug CPUs Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 3000.147 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2053744k/2096896k available (2397k kernel code, 42768k reserved, 1210k data, 204k init) Calibrating delay using timer specific routine.. 6005.70 BogoMIPS (lpj=12011403) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) Using local APIC timer interrupts. result 12500500 Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.44 BogoMIPS (lpj=12000895) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.40 BogoMIPS (lpj=12000819) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 APIC error on CPU2: 00(40) Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.35 BogoMIPS (lpj=12000704) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 APIC error on CPU3: 00(40) Brought up 4 CPUs testing NMI watchdog ... OK. migration_cost=3,1714 checking if image is initramfs... it is Freeing initrd memory: 1875k freed DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:04:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-DMA: Disabling IOMMU. pnp: 00:06: ioport range 0x800-0x87f could not be reserved pnp: 00:06: ioport range 0x880-0x8bf has been reserved pnp: 00:06: ioport range 0x8c0-0x8df has been reserved pnp: 00:06: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:06: ioport range 0xc00-0xc0f has been reserved pnp: 00:06: ioport range 0xc10-0xc1f has been reserved pnp: 00:06: ioport range 0xca0-0xcaf has been reserved pnp: 00:06: ioport range 0xc20-0xc3f has been reserved PCI: Bridge: 0000:01:00.0 IO window: e000-efff MEM window: fea00000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: e000-efff MEM window: fe800000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe600000-fe7fffff PREFETCH window: f0000000-f7ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1146770259.072:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 7C299BBC39CD3974 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Intel E7520/7320/7525 detected.<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled pnp: Device 00:05 activated. 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 PALO PXH PXHB PXHA PICH ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 204k freed Write protecting the kernel read-only data: 426k SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xCCF8 ctl 0xCCF2 bmdma 0xCCC0 irq 17 ata2: SATA max UDMA/133 cmd 0xCCE0 ctl 0xCCDA bmdma 0xCCC8 irq 17 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3c21 87:4663 88:207f ata1: dev 0 ATA-7, max UDMA/133, 156250000 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: dm-0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 10615593 ext3_orphan_cleanup: deleting unreferenced inode 14305643 ext3_orphan_cleanup: deleting unreferenced inode 10835636 ext3_orphan_cleanup: deleting unreferenced inode 10607810 ext3_orphan_cleanup: deleting unreferenced inode 10835634 ext3_orphan_cleanup: deleting unreferenced inode 10610239 ext3_orphan_cleanup: deleting unreferenced inode 10607808 ext3_orphan_cleanup: deleting unreferenced inode 10607746 ext3_orphan_cleanup: deleting unreferenced inode 10607740 ext3_orphan_cleanup: deleting unreferenced inode 10607733 ext3_orphan_cleanup: deleting unreferenced inode 10607659 ext3_orphan_cleanup: deleting unreferenced inode 16891829 ext3_orphan_cleanup: deleting unreferenced inode 16891825 ext3_orphan_cleanup: deleting unreferenced inode 10606624 EXT3-fs: dm-0: 14 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 889 types, 109 bools security: 55 classes, 244452 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts floppy0: no floppy controllers found Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI Copyright (c) 1999-2005 Intel Corporation. GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 32 (level, low) -> IRQ 18 e1000: 0000:02:04.0: e1000_probe: (PCI:66MHz:32-bit) 00:14:22:b1:1a:33 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection hw_random: RNG not detected MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Mar 28 2006 tolm = 80000, remapbase = ffc000, remaplimit = 0 EDAC MC0: Giving out device to "e752x_edac" E7520: PCI 0000:00:00.0 ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found ACPI: Video Device [EVGA] (multi-head: no rom: yes post: no) e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 i2c /dev entries driver SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver SELinux: initialized (dev smbfs, type smbfs), uses genfs_contexts SELinux: initialized (dev smbfs, type smbfs), uses genfs_contexts eth0: no IPv6 routers present SELinux: initialized (dev smbfs, type smbfs), uses genfs_contexts -- Paul Risenhoover - Director of Engineering - DAX Solutions, Inc. -