From: Jeff Garzik <jeff@garzik.org>
To: "Linsys Contractor Amit S. Kale" <amitkale@unminc.com>
Cc: netdev@vger.kernel.org, sanjeev@netxen.com,
unmproj@linsyssoft.com, Andrew Morton <akpm@osdl.org>
Subject: Re: [PATCH 2.6.17 3/9] NetXen: Registers info header file.
Date: Wed, 05 Jul 2006 11:51:48 -0400 [thread overview]
Message-ID: <44ABE014.6010407@garzik.org> (raw)
In-Reply-To: <Pine.LNX.4.64.0607050629100.27969@dut46>
Linsys Contractor Amit S. Kale wrote:
=> +extern struct netxen_adapter *g_adapter;
> +
> +/*
> + * The basic unit of access when reading/writing control registers.
> + */
> +
> +typedef u32 netxen_crbword_t; /* single word in CRB space */
> +
> +#define NETXEN_HW_H0_CH_HUB_ADR 0x05
> +#define NETXEN_HW_H1_CH_HUB_ADR 0x0E
> +#define NETXEN_HW_H2_CH_HUB_ADR 0x03
> +#define NETXEN_HW_H3_CH_HUB_ADR 0x01
> +#define NETXEN_HW_H4_CH_HUB_ADR 0x06
> +#define NETXEN_HW_H5_CH_HUB_ADR 0x07
> +#define NETXEN_HW_H6_CH_HUB_ADR 0x08
> +
> +/* Hub 0 */
> +#define NETXEN_HW_MN_CRB_AGT_ADR 0x15
> +#define NETXEN_HW_MS_CRB_AGT_ADR 0x25
> +
> +/* Hub 1 */
> +#define NETXEN_HW_PS_CRB_AGT_ADR 0x73
> +#define NETXEN_HW_SS_CRB_AGT_ADR 0x20
> +#define NETXEN_HW_RPMX3_CRB_AGT_ADR 0x0b
> +#define NETXEN_HW_QMS_CRB_AGT_ADR 0x00
> +#define NETXEN_HW_SQGS0_CRB_AGT_ADR 0x01
> +#define NETXEN_HW_SQGS1_CRB_AGT_ADR 0x02
> +#define NETXEN_HW_SQGS2_CRB_AGT_ADR 0x03
> +#define NETXEN_HW_SQGS3_CRB_AGT_ADR 0x04
> +#define NETXEN_HW_C2C0_CRB_AGT_ADR 0x58
> +#define NETXEN_HW_C2C1_CRB_AGT_ADR 0x59
> +#define NETXEN_HW_C2C2_CRB_AGT_ADR 0x5a
> +#define NETXEN_HW_RPMX2_CRB_AGT_ADR 0x0a
> +#define NETXEN_HW_RPMX4_CRB_AGT_ADR 0x0c
> +#define NETXEN_HW_RPMX7_CRB_AGT_ADR 0x0f
> +#define NETXEN_HW_RPMX9_CRB_AGT_ADR 0x12
> +#define NETXEN_HW_SMB_CRB_AGT_ADR 0x18
overall, enums are preferred over #define. It provides type info to the
compiler, provides symbol info to debuggers and similar tools, and other
benefits.
e.g.
enum {
NETXEN_HW_RPMX9_CRB_AGT_ADR = 0x12,
NETXEN_HW_SMB_CRB_AGT_ADR = 0x18,
};
> +#define NETXEN_PCI_MAPSIZE 128
> +#define NETXEN_PCI_DDR_NET (unsigned long)0x00000000
> +#define NETXEN_PCI_QDR_NET (unsigned long)0x04000000
> +#define NETXEN_PCI_DIRECT_CRB (unsigned long)0x04400000
> +#define NETXEN_PCI_CAMQM_MAX (unsigned long)0x04ffffff
> +#define NETXEN_PCI_OCM0 (unsigned long)0x05000000
> +#define NETXEN_PCI_OCM0_MAX (unsigned long)0x050fffff
> +#define NETXEN_PCI_OCM1 (unsigned long)0x05100000
> +#define NETXEN_PCI_OCM1_MAX (unsigned long)0x051fffff
> +#define NETXEN_PCI_CRBSPACE (unsigned long)0x06000000
Use the 'UL' suffix, not a cast
> +struct netxen_pcix_crb_window {
> + netxen_crbword_t rsvd1:25, addrbit:1, /* bit 25 of CRB address */
> + rsvd2:6;
> +};
see bitfields objections in another email
next prev parent reply other threads:[~2006-07-05 15:51 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-05 13:15 [PATCH 2.6.17 0/9] NetXen: ethernet nic driver Linsys Contractor Amit S. Kale
2006-07-05 13:20 ` [PATCH 2.6.17 1/9] NetXen: Makefile and ethtool interface Linsys Contractor Amit S. Kale
2006-07-05 15:34 ` Jeff Garzik
2006-07-06 13:50 ` Pradeep Dalvi
2006-07-05 13:29 ` [PATCH 2.6.17 2/9] NetXen: Main header file Linsys Contractor Amit S. Kale
2006-07-05 15:46 ` Jeff Garzik
2006-07-05 13:31 ` [PATCH 2.6.17 3/9] NetXen: Registers info " Linsys Contractor Amit S. Kale
2006-07-05 15:51 ` Jeff Garzik [this message]
2006-07-05 13:34 ` [PATCH 2.6.17 4/9] NetXen: hardware access routines Linsys Contractor Amit S. Kale
2006-07-05 16:00 ` Jeff Garzik
2006-07-05 13:38 ` [PATCH 2.6.17 5/9] NetXen: hardware access header file Linsys Contractor Amit S. Kale
2006-07-05 16:04 ` Jeff Garzik
2006-07-05 13:40 ` [PATCH 2.6.17 6/9] NetXen: hw initialization routines Linsys Contractor Amit S. Kale
2006-07-05 16:12 ` Jeff Garzik
2006-07-05 13:42 ` [PATCH 2.6.17 7/9] NetXen: ioctl interface and intr routines Linsys Contractor Amit S. Kale
2006-07-05 13:44 ` [PATCH 2.6.17 8/9] NetXen: Driver main file Linsys Contractor Amit S. Kale
2006-07-05 13:47 ` [PATCH 2.6.17 9/9] NetXen: niu handling and CRB reg definitions Linsys Contractor Amit S. Kale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44ABE014.6010407@garzik.org \
--to=jeff@garzik.org \
--cc=akpm@osdl.org \
--cc=amitkale@unminc.com \
--cc=netdev@vger.kernel.org \
--cc=sanjeev@netxen.com \
--cc=unmproj@linsyssoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).