From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jar Subject: RE: oops in current -git Date: Wed, 12 Jul 2006 01:27:21 +0300 Message-ID: <44B425C9.5010000@pcuf.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: jeff@garzik.org Return-path: Received: from mbox2.netikka.net ([213.250.81.203]:49349 "EHLO mbox2.netikka.net") by vger.kernel.org with ESMTP id S932211AbWGKW13 (ORCPT ); Tue, 11 Jul 2006 18:27:29 -0400 To: netdev@vger.kernel.org Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This happen to me with FC4 and 2.6.17-1.2141_FC4. I have eth0=e100, eth1=8139too and wlan0=hostap_pci. When ACPI is enabled, all works. If acpi=off it hangs for a minute (at stage: Bringing up interface eth1: Determinig IP information for eth1...SIOCSIFFLAGS: Device of recource busy) and then recovers but only eth0 works. But when I put 'acpi=off noapic nolapic' all works again. Strange Linux version 2.6.17-1.2141_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Fri Jun 30 14:53:04 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000ce000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fb6b0 Using x86 segment limits to approximate NX protection On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 DMI 2.3 present. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: I845 APIC at: 0xFEE00000 Processor #0 15:1 APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Built 1 zonelists Kernel command line: ro root=LABEL=/ vga=771 acpi=off mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c077d000 soft=c077e000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1594.361 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514048k/524224k available (1977k kernel code, 9552k reserved, 1358k data, 212k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3193.59 BogoMIPS (lpj=6387188) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Checking 'hlt' instruction... OK. ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking if image is initramfs... it is Freeing initrd memory: 1070k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0400-043f claimed by ICH4 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 201 PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 177 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:02:08.0[A] -> IRQ 193 PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: dfd00000-dfdfffff PREFETCH window: d7a00000-dfafffff PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: dfe00000-dfefffff PREFETCH window: dfb00000-dfbfffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1152666513.776:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key CECC7E59912DB2CA - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 937k, total 16384k vesafb: mode is 800x600x8, linelength=800, pages=31 vesafb: protected mode interface info at c000:442f vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 18 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST320011A, ATA DISK drive hdb: Maxtor 6Y080L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: OEM CD-ROM F522B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hdb: max request size: 128KiB hdb: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 < hdb5 hdb6 > hdc: ATAPI 48X CD-ROM drive, 0kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 212k freed Write protecting the kernel read-only data: 924k input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1152666517.456:2): selinux=0 auid=4294967295 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation e100: eth0: e100_probe: addr 0xdfeff000, irq 193, MAC addr 00:04:23:12:F8:19 8139too Fast Ethernet driver 0.9.27 PCI: Enabling device 0000:02:0b.0 (0100 -> 0103) PCI: No IRQ known for interrupt pin D of device 0000:02:0b.0. Probably buggy MP table. eth1: RealTek RTL8139 at 0xe081af00, 00:30:84:ee:82:6a, IRQ 0 eth1: Identified 8139 chip type 'RTL-8139C' ieee80211_crypt: registered algorithm 'NULL' hostap_pci: 0.4.4-kernel (Jouni Malinen ) PCI: Enabling device 0000:02:0a.0 (0110 -> 0112) PCI: No IRQ known for interrupt pin C of device 0000:02:0a.0. Probably buggy MP table. hostap_pci: Registered netdevice wifi0 wifi0: Original COR value: 0x2 setup_irq: irq handler mismatch setup_irq+0xef/0xfc prism2_interrupt+0x0/0x6f7 [hostap_pci] request_irq+0x6d/0x8b prism2_pci_probe+0x8e7/0xa2f [hostap_pci] wait_for_completion+0x115/0x11d __driver_attach+0x0/0x8b pci_device_probe+0x36/0x55 driver_probe_device+0x42/0x8b __driver_attach+0x63/0x8b bus_for_each_dev+0x33/0x55 driver_attach+0x11/0x13 __driver_attach+0x0/0x8b bus_add_driver+0x5c/0xdf __pci_register_driver+0x5b/0x7d sys_init_module+0x1292/0x135f register_netdevice+0x0/0x316 syscall_call+0x7/0xb wifi0: request_irq failed PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 54793 usecs intel8x0: clocking to 48000 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 185, io base 0x0000d000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 201, io base 0x0000d400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected input: PC Speaker as /class/input/input2 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052252k swap on /dev/hda2. Priority:-1 extents:1 across:1052252k e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex setup_irq: irq handler mismatch setup_irq+0xef/0xfc rtl8139_interrupt+0x0/0x389 [8139too] request_irq+0x6d/0x8b rtl8139_open+0x26/0x1a3 [8139too] dev_open+0x2b/0x62 dev_change_flags+0x47/0xe6 devinet_ioctl+0x24b/0x54a sock_ioctl+0x1a8/0x1c5 sock_ioctl+0x0/0x1c5 do_ioctl+0x16/0x48 vfs_ioctl+0x1f2/0x209 sys_ioctl+0x46/0x5f syscall_call+0x7/0xb setup_irq: irq handler mismatch setup_irq+0xef/0xfc rtl8139_interrupt+0x0/0x389 [8139too] request_irq+0x6d/0x8b rtl8139_open+0x26/0x1a3 [8139too] dev_open+0x2b/0x62 dev_change_flags+0x47/0xe6 devinet_ioctl+0x24b/0x54a sock_ioctl+0x1a8/0x1c5 sock_ioctl+0x0/0x1c5 do_ioctl+0x16/0x48 vfs_ioctl+0x1f2/0x209 sys_ioctl+0x46/0x5f syscall_call+0x7/0xb setup_irq: irq handler mismatch setup_irq+0xef/0xfc rtl8139_interrupt+0x0/0x389 [8139too] request_irq+0x6d/0x8b rtl8139_open+0x26/0x1a3 [8139too] dev_open+0x2b/0x62 dev_change_flags+0x47/0xe6 devinet_ioctl+0x24b/0x54a sock_ioctl+0x1a8/0x1c5 sock_ioctl+0x0/0x1c5 do_ioctl+0x16/0x48 vfs_ioctl+0x1f2/0x209 sys_ioctl+0x46/0x5f syscall_call+0x7/0xb setup_irq: irq handler mismatch setup_irq+0xef/0xfc rtl8139_interrupt+0x0/0x389 [8139too] request_irq+0x6d/0x8b rtl8139_open+0x26/0x1a3 [8139too] dev_open+0x2b/0x62 dev_change_flags+0x47/0xe6 devinet_ioctl+0x24b/0x54a sock_ioctl+0x1a8/0x1c5 sock_ioctl+0x0/0x1c5 do_ioctl+0x16/0x48 vfs_ioctl+0x1f2/0x209 sys_ioctl+0x46/0x5f syscall_call+0x7/0xb setup_irq: irq handler mismatch setup_irq+0xef/0xfc rtl8139_interrupt+0x0/0x389 [8139too] request_irq+0x6d/0x8b rtl8139_open+0x26/0x1a3 [8139too] dev_open+0x2b/0x62 dev_change_flags+0x47/0xe6 devinet_ioctl+0x24b/0x54a sock_ioctl+0x1a8/0x1c5 sock_ioctl+0x0/0x1c5 do_ioctl+0x16/0x48 vfs_ioctl+0x1f2/0x209 sys_ioctl+0x46/0x5f syscall_call+0x7/0xb parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport0: Printer, Hewlett-Packard hp LaserJet 1320 series lp0: using parport0 (interrupt-driven). lp0: console ready Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period device eth0 entered promiscuous mode audit(1152655847.770:3): dev=eth0 prom=256 old_prom=0 auid=4294967295 00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 03) Subsystem: Hewlett-Packard Company: Unknown device 1a30 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) Subsystem: Intel Corporation EtherExpress PRO/100 VE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-