From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Riffard Subject: Re: 2.6.18-rc4-mm1: eth0: trigger_send() called with the transmitter busy Date: Mon, 14 Aug 2006 22:06:25 +0200 Message-ID: <44E0D7C1.7040509@free.fr> References: <20060813012454.f1d52189.akpm@osdl.org> <44E08AF7.9060508@free.fr> <20060814095016.04d178ab.akpm@osdl.org> <44E0B72C.6010503@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: Kernel development list , netdev@vger.kernel.org Return-path: Received: from smtp5-g19.free.fr ([212.27.42.35]:65260 "EHLO smtp5-g19.free.fr") by vger.kernel.org with ESMTP id S932625AbWHNUEy (ORCPT ); Mon, 14 Aug 2006 16:04:54 -0400 To: Andrew Morton In-Reply-To: <44E0B72C.6010503@free.fr> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Le 14.08.2006 19:47, Laurent Riffard a =E9crit : > Le 14.08.2006 18:50, Andrew Morton a =E9crit : >> On Mon, 14 Aug 2006 16:38:47 +0200 >> Laurent Riffard wrote: >> >>> Le 13.08.2006 10:24, Andrew Morton a __crit : >>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.= 18-rc4/2.6.18-rc4-mm1/ >>> Hello, >>> >>> This morning, while trying to suspend to disk, my box started to lo= op=20 >>> displaying the following message: >>> eth0: trigger_send() called with the transmitter busy. >>> >>> Here is the scenario. I booted 2.6.18-rc4-mm1 with this command lin= e: >>> root=3D/dev/vglinux1/lvroot video=3Dvesafb:ywrap,mtrr splash=3Dsile= nt resume=3D/dev/hdb7 netconsole=3D@192.163.0.3/,@192.168.0.1/00:0E:9B:= 91:ED:72 init 1 >>> >>> Then I issued: >>> # echo 6 > /proc/sys/kernel/printk >>> # echo disk > /sys/power/state >> ne2k isn't the most actively-maintained driver. >> >> But most (I think all) net drivers have problems during suspend when >> netconsole is active. Does disabling netconsole help? >=20 > Yes it does.=20 > =20 >> Did this operation work OK in earlier kernels, with netconsole enabl= ed? >=20 > It's the first time I see such a message. I can't speak for 2.6.18-rc= 3-mm2=20 > because it could not suspend at all (did hang right after=20 > "echo disk > /sys/power/state"), but it worked in earlier kernels. >=20 > I'll try with plain 2.6.18-rc4. Same problem with 2.6.18-rc4. I'll try earlier -rc kernel tomorrow. --=20 laurent