From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Subject: Re: [PATCH 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT. Date: Tue, 25 Apr 2017 18:23:15 +0300 Message-ID: <44d0c48c-d80f-271e-0e19-ac87a53e2e53@cogentembedded.com> References: <20170424215022.30382-1-eric@anholt.net> <20170424215022.30382-3-eric@anholt.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Cc: Mark Rutland , Andrew Lunn , Florian Fainelli , Scott Branden , Vivien Didelot , Jon Mason , Network Development , open list , Eric Anholt , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Rob Herring , BCM Kernel Feedback , Ray Jui , linux-arm-kernel To: Jon Mason Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org List-Id: netdev.vger.kernel.org Hello! On 04/25/2017 06:15 PM, Jon Mason wrote: >>> Cygnus has a single amac controller connected to the B53 switch with 2 >>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to >>> the external ethernet jacks. [...] >>> Signed-off-by: Eric Anholt >>> --- >>> arch/arm/boot/dts/bcm-cygnus.dtsi | 60 >>> ++++++++++++++++++++++++++++++++++ >>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++ >>> 2 files changed, 68 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi >>> b/arch/arm/boot/dts/bcm-cygnus.dtsi >>> index 009f1346b817..318899df9972 100644 >>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi >>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi [...] >>> @@ -295,6 +345,16 @@ >>> status = "disabled"; >>> }; >>> >>> + eth0: enet@18042000 { >>> + compatible = "brcm,amac"; >>> + reg = <0x18042000 0x1000>, >>> + <0x18110000 0x1000>; >>> + reg-names = "amac_base", "idm_base"; >> >> >> I don't think "_base" suffixes are necessary here. > > 100% necessary, per the driver. See > drivers/net/ethernet/broadcom/bgmac-platform.c I'd recommend to fix the driver/bindings then... MBR, Sergei