From: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
To: John Linville <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Martin Langer <martin-langer-Mmb7MZpHnFY@public.gmane.org>,
bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
Michael Buesch <mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH] Try 2: ucode debug status via sysfs for wireless-2.6
Date: Thu, 07 Sep 2006 10:12:11 -0500 [thread overview]
Message-ID: <450036CB.6080106@lwfinger.net> (raw)
In-Reply-To: <20060905181232.GA4733@tuba>
John,
Please apply this patch by Martin Langer to wireless-2.6. It must follow the patch to "Add firmware
version printout to wireless-2.6 (bcm43xx-softmac)". Martins's original version was appropriate for
an obsolete version of bcm43xx-softmac, but I have updated and tested. This version incorporates the
locking revision comments of Michael Buesch.
Thanks,
Larry
This patch prints out the ucode debug status to sysfs. So, users can
watch the microcode status of their hardware.
Signed-off-by: Martin Langer <martin-langer-Mmb7MZpHnFY@public.gmane.org>
Signed-off-by: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
===========
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index 62fd7e2..7c2163e 100644
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -311,6 +311,7 @@
#define BCM43xx_UCODE_PATCHLEVEL 0x0002
#define BCM43xx_UCODE_DATE 0x0004
#define BCM43xx_UCODE_TIME 0x0006
+#define BCM43xx_UCODE_STATUS 0x0040
/* MicrocodeFlagsBitfield (addr + lo-word values?)*/
#define BCM43xx_UCODEFLAGS_OFFSET 0x005E
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
@@ -373,6 +373,59 @@ static DEVICE_ATTR(phymode, 0644,
bcm43xx_attr_phymode_show,
bcm43xx_attr_phymode_store);
+static ssize_t bcm43xx_attr_microcode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ unsigned long flags;
+ struct bcm43xx_private *bcm = dev_to_bcm(dev);
+ ssize_t count = 0;
+ u16 status;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ mutex_lock(&(bcm)->mutex);
+ spin_lock_irqsave(&bcm->irq_lock, flags);
+ status = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODE_STATUS);
+
+ spin_unlock_irqrestore(&bcm->irq_lock, flags);
+ mutex_unlock(&(bcm)->mutex);
+ switch (status) {
+ case 0x0000:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (invalid)\n",
+ status);
+ break;
+ case 0x0001:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (init)\n",
+ status);
+ break;
+ case 0x0002:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (active)\n",
+ status);
+ break;
+ case 0x0003:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (suspended)\n",
+ status);
+ break;
+ case 0x0004:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (asleep)\n",
+ status);
+ break;
+ default:
+ count = snprintf(buf, PAGE_SIZE, "0x%.4x (unknown)\n",
+ status);
+ break;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(microcodestatus, 0444,
+ bcm43xx_attr_microcode_show,
+ NULL);
+
int bcm43xx_sysfs_register(struct bcm43xx_private *bcm)
{
struct device *dev = &bcm->pci_dev->dev;
@@ -392,9 +445,14 @@ int bcm43xx_sysfs_register(struct bcm43x
err = device_create_file(dev, &dev_attr_phymode);
if (err)
goto err_remove_shortpreamble;
+ err = device_create_file(dev, &dev_attr_microcodestatus);
+ if (err)
+ goto err_remove_phymode;
out:
return err;
+err_remove_phymode:
+ device_remove_file(dev, &dev_attr_phymode);
err_remove_shortpreamble:
device_remove_file(dev, &dev_attr_shortpreamble);
err_remove_interfmode:
@@ -408,6 +466,7 @@ void bcm43xx_sysfs_unregister(struct bcm
{
struct device *dev = &bcm->pci_dev->dev;
+ device_remove_file(dev, &dev_attr_microcodestatus);
device_remove_file(dev, &dev_attr_phymode);
device_remove_file(dev, &dev_attr_shortpreamble);
device_remove_file(dev, &dev_attr_interference);
prev parent reply other threads:[~2006-09-07 15:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060904205340.GB3726@tuba>
[not found] ` <200609042256.54629.mb@bu3sch.de>
[not found] ` <20060905181232.GA4733@tuba>
2006-09-07 1:34 ` [PATCH] ucode debug status via sysfs for wireless-2.6 Larry Finger
[not found] ` <44FF772A.5000301-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
2006-09-07 8:33 ` Michael Buesch
[not found] ` <200609071033.52258.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
2006-09-07 13:21 ` Larry Finger
[not found] ` <45001CCA.1000304-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
2006-09-07 20:48 ` Michael Buesch
2006-09-07 21:05 ` Larry Finger
2006-09-07 15:12 ` Larry Finger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=450036CB.6080106@lwfinger.net \
--to=larry.finger-tq5ms3gmjblk1umjsbkqmq@public.gmane.org \
--cc=bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
--cc=linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org \
--cc=martin-langer-Mmb7MZpHnFY@public.gmane.org \
--cc=mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).