From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jeff Garzik <jgarzik@pobox.com>
Subject: Re: [patch 3/3] Add tsi108 On Chip Ethernet device driver support
Date: Thu, 21 Sep 2006 00:26:46 -0400
Message-ID: <45121486.3070503@pobox.com>
References: <A0CDBA58F226D911B202000BDBAD46730A1B1410@zch01exm23.fsl.freescale.net>	 <1157962200.10526.10.camel@localhost.localdomain>	 <1158051351.14448.97.camel@localhost.localdomain>	 <ada3bax2lzw.fsf@cisco.com>  <4506C789.4050404@pobox.com> <1158749825.7973.9.camel@localhost.localdomain>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Cc: Roland Dreier <rdreier@cisco.com>, Andrew Morton <akpm@osdl.org>,
	netdev <netdev@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Return-path: <netdev-owner@vger.kernel.org>
Received: from srv5.dvmed.net ([207.36.208.214]:45706 "EHLO mail.dvmed.net")
	by vger.kernel.org with ESMTP id S1750787AbWIUE0x (ORCPT
	<rfc822;netdev@vger.kernel.org>); Thu, 21 Sep 2006 00:26:53 -0400
To: Zang Roy-r61911 <tie-fei.zang@freescale.com>
In-Reply-To: <1158749825.7973.9.camel@localhost.localdomain>
Sender: netdev-owner@vger.kernel.org
List-Id: netdev.vger.kernel.org

Zang Roy-r61911 wrote:
> +#define TSI108_ETH_WRITE_REG(offset, val) \
> +	writel(le32_to_cpu(val),data->regs + (offset))
> +
> +#define TSI108_ETH_READ_REG(offset) \
> +	le32_to_cpu(readl(data->regs + (offset)))
> +
> +#define TSI108_ETH_WRITE_PHYREG(offset, val) \
> +	writel(le32_to_cpu(val), data->phyregs + (offset))
> +
> +#define TSI108_ETH_READ_PHYREG(offset) \
> +	le32_to_cpu(readl(data->phyregs + (offset)))


NAK:

1) writel() and readl() are defined to be little endian.

If your platform is different, then your platform should have its own 
foobus_writel() and foobus_readl().

2) TSI108_ETH_WRITE_REG() is just way too long.  TSI_READ(), 
TSI_WRITE(), TSI_READ_PHY() and TSI_WRITE_PHY() would be far more readable.

More in next email.