From mboxrd@z Thu Jan 1 00:00:00 1970 From: Auke Kok Subject: Re: [PATCH] Rewrite e100_phys_id Date: Tue, 07 Nov 2006 14:34:57 -0800 Message-ID: <45510A11.9070803@intel.com> References: <20061026191154.GG5591@parisc-linux.org> <4550D16A.1090008@intel.com> <20061107190632.GW27140@parisc-linux.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Auke Kok , john.ronciak@intel.com, jesse.brandeburg@intel.com, netdev@vger.kernel.org, Jeff Garzik Return-path: Received: from mga02.intel.com ([134.134.136.20]:45643 "EHLO mga02.intel.com") by vger.kernel.org with ESMTP id S1753781AbWKGWfF (ORCPT ); Tue, 7 Nov 2006 17:35:05 -0500 To: Matthew Wilcox In-Reply-To: <20061107190632.GW27140@parisc-linux.org> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Matthew Wilcox wrote: > On Tue, Nov 07, 2006 at 10:33:14AM -0800, Auke Kok wrote: >> Matthew Wilcox wrote: >>> Tested on the internal interface of an HP Integrity rx2600. >> bad news, it's completely hosed. The adapter does some indistinguishable >> blinking for a second, then stops blinking alltogether. > > Weird. I tested it on the only e100 I have access to, and it worked. > I've just reviewed the patch you quoted below, and I don't see what the > problem is. I don't understand it either, and will dig into this after I get more coffee. point is that `ethtool -p` now exits immediately after 500ms. it should loop until ^C is pressed. Somehow msleep_interruptable is always returning 0 on my platform? very strange. Auke