[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Divy Le Ray]

Jeff,

I resubmit the patch supporting the latest Chelsio T3 adapter.
It incorporates Arjan's feedbacks:
- remove unnecessary ifdefs
- updates the pci ressource managment
- add flush after register write.

It is built against Linus'tree.

A corresponding monolithic patch is available at this URL:
http://service.chelsio.com/kernel.org/cxgb3.patch.bz2

This driver is required by the Chelsio T3 RDMA driver
which was updated on 12/20/2006.

Cheers,
Divy

[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Divy Le Ray]

Jeff,

I resubmit the patch supporting the latest Chelsio T3 adapter.
It incorporates the last feedbacks for code cleanup.
It is built gainst Linus'tree.

We think the driver is now ready to be merged.
Can you please advise on the next steps for inclusion in 2.6.20 ?

A corresponding monolithic patch is posted at the following URL:
http://service.chelsio.com/kernel.org/cxgb3.patch.bz2

This driver is required by the Chelsio T3 RDMA driver
which was updated on 12/10/2006.

Cheers,
Divy

Re: [PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Steve Wise]

Hey Jeff,

Is this driver in your queue for merging?  The Chelsio T3 RDMA driver
that depends on the T3 Ethernet driver is also ready to be merged.

I was just wondering if its in queue, or if there is something else we
need to do.

Thanks,

Steve.


On Wed, 2006-12-13 at 21:40 -0800, Divy Le Ray wrote:
> Jeff,
> 
> I resubmit the patch supporting the latest Chelsio T3 adapter.
> It incorporates the last feedbacks for code cleanup.
> It is built gainst Linus'tree.
> 
> We think the driver is now ready to be merged.
> Can you please advise on the next steps for inclusion in 2.6.20 ?
> 
> A corresponding monolithic patch is posted at the following URL:
> http://service.chelsio.com/kernel.org/cxgb3.patch.bz2
> 
> This driver is required by the Chelsio T3 RDMA driver
> which was updated on 12/10/2006.
> 
> Cheers,
> Divy
> 
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Jeff Garzik]

Steve Wise wrote:
> Hey Jeff,
> 
> Is this driver in your queue for merging?  The Chelsio T3 RDMA driver
> that depends on the T3 Ethernet driver is also ready to be merged.
> 
> I was just wondering if its in queue, or if there is something else we
> need to do.

I have mainly been waiting for feedback from other developers on it, and 
letting the driver settle down.  When its being revised on a daily 
basis, I usually just delete the driver and wait for the next revision :)

	Jeff

Re: [PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Steve Wise]

On Fri, 2006-12-15 at 12:06 -0500, Jeff Garzik wrote:
> Steve Wise wrote:
> > Hey Jeff,
> > 
> > Is this driver in your queue for merging?  The Chelsio T3 RDMA driver
> > that depends on the T3 Ethernet driver is also ready to be merged.
> > 
> > I was just wondering if its in queue, or if there is something else we
> > need to do.
> 
> I have mainly been waiting for feedback from other developers on it, and 
> letting the driver settle down.  When its being revised on a daily 
> basis, I usually just delete the driver and wait for the next revision :)
> 
> 	Jeff

Ok, fair enough.
  
I do believe all issues/comments have been addressed for both drivers,
and the last review round only had minimal feedback.  Perhaps they're
ready now?

Steve.

[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Divy Le Ray]

Hi,

I resubmit the patch supporting the latest Chelsio T3 adapter.
It incorporates feedbacks from Stephen:
- per port data accessed through netdev_priv()
- remove locking in netpoll() method

It also adapts to the new workqueue rules.

This patch adds support for the latest Chelsio adapter, T3. It is built
against 2.6.19.

A corresponding monolithic patch against 2.6.19 is posted at the
following URL: http://service.chelsio.com/kernel.org/cxgb3.patch.bz2

We wish this patch to be considered for inclusion in 2.6.20. This driver
is required by the Chelsio T3 RDMA driver which was updated on 12/02/2006.

Cheers,
Divy

Re: [PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Stephen Hemminger]

Minor style stuff (that can be fixed later).
1) /* C style comments */ are preferred over // C++ style
2) Please use C99 style structure initializers especially for OS
   interface structures like ops for MII.

[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Divy Le Ray]

Hi,

I resubmit the patch supporting the latest Chelsio T3 adapter.
It incoporpates feedbacks from Stephen and Jan.

This patch adds support for the latest Chelsio adapter, T3. It is built
against 2.6.19.

A corresponding monolithic patch against 2.6.19 is posted at the
following URL: http://service.chelsio.com/kernel.org/cxgb3.patch.bz2

We wish this patch to be considered for inclusion in 2.6.20. This driver
is required by the Chelsio T3 RDMA driver which was updated on 12/02/2006.

Cheers,
Divy

[PATCH 0/10] cxgb3: Chelsio T3 1G/10G ethernet device driver

[Divy Le Ray]

Hi,

Based on Arnd's feedback, I re-submit the patch supporting the latest
Chelsio T3 adapter in inlined mails.  Some header files were trimmed
down to reduce the code footprint.

This patch adds support for the latest Chelsio adapter, T3.  It is built
against 2.6.19-rc6.

A corresponding monolithic patch against 2.6.19-rc6 is posted at the
following URL: http://service.chelsio.com/kernel.org/cxgb3.patch.bz2

We wish this patch to be considered for inclusion in 2.6.20. This driver
is required by the Chelsio T3 RDMA driver which was posted on 11/15/2006.

Cheers,
Divy