From: Ben Greear <greearb@candelatech.com>
To: David Stevens <dlstevens@us.ibm.com>
Cc: jarkao2@o2.pl, NetDev <netdev@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>
Subject: Re: BUG: soft lockup detected on CPU#0! (2.6.18.2 plus hacks)
Date: Wed, 03 Jan 2007 15:35:20 -0800 [thread overview]
Message-ID: <459C3DB8.6090603@candelatech.com> (raw)
In-Reply-To: <OF68896635.077F2C1B-ON88257258.007F0BD8-88257258.007F8A72@us.ibm.com>
David Stevens wrote:
> Ben,
> Here's a patch that I think will fix it, assuming the receive is
> on the
> same device as the initialization. Can you try this out?
We are attempting to reproduce this now...as soon as we can reproduce,
I'll apply this and see if that fixes the problem. This race is evidently
quite difficult to hit, so I'm not sure how long this will take.
Perhaps someone like DaveM could review the patch for logical correctness
and go ahead and apply anyway if it is more correct? I confuse myself often
enough trying to deal with the network stack locking that I should probably
not be the final arbiter of this patch :)
Thanks,
Ben
>
> +-DLS
> [inline for viewing, attached for applying]
>
> Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
>
> diff -ruNp linux-2.6.19.1/net/ipv4/devinet.c
> linux-2.6.19.1T1/net/ipv4/devinet.c
> --- linux-2.6.19.1/net/ipv4/devinet.c 2006-12-11 11:32:53.000000000
> -0800
> +++ linux-2.6.19.1T1/net/ipv4/devinet.c 2007-01-03 14:37:56.000000000
> -0800
> @@ -165,9 +165,8 @@ struct in_device *inetdev_init(struct ne
> NET_IPV4_NEIGH, "ipv4", NULL, NULL);
> #endif
>
> - /* Account for reference dev->ip_ptr */
> + /* Account for reference dev->ip_ptr (below) */
> in_dev_hold(in_dev);
> - rcu_assign_pointer(dev->ip_ptr, in_dev);
>
> #ifdef CONFIG_SYSCTL
> devinet_sysctl_register(in_dev, &in_dev->cnf);
> @@ -176,6 +175,8 @@ struct in_device *inetdev_init(struct ne
> if (dev->flags & IFF_UP)
> ip_mc_up(in_dev);
> out:
> + /* we can receive as soon as ip_ptr is set -- do this last */
> + rcu_assign_pointer(dev->ip_ptr, in_dev);
> return in_dev;
> out_kfree:
> kfree(in_dev);
> diff -ruNp linux-2.6.19.1/net/ipv6/addrconf.c
> linux-2.6.19.1T1/net/ipv6/addrconf.c
> --- linux-2.6.19.1/net/ipv6/addrconf.c 2006-12-11 11:32:53.000000000
> -0800
> +++ linux-2.6.19.1T1/net/ipv6/addrconf.c 2007-01-03
> 14:47:07.000000000 -0800
> @@ -413,8 +413,6 @@ static struct inet6_dev * ipv6_add_dev(s
> if (netif_carrier_ok(dev))
> ndev->if_flags |= IF_READY;
>
> - /* protected by rtnl_lock */
> - rcu_assign_pointer(dev->ip6_ptr, ndev);
>
> ipv6_mc_init_dev(ndev);
> ndev->tstamp = jiffies;
> @@ -425,6 +423,8 @@ static struct inet6_dev * ipv6_add_dev(s
> NULL);
> addrconf_sysctl_register(ndev, &ndev->cnf);
> #endif
> + /* protected by rtnl_lock */
> + rcu_assign_pointer(dev->ip6_ptr, ndev);
> return ndev;
> }
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2007-01-03 23:35 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-20 2:13 BUG: soft lockup detected on CPU#0! (2.6.18.2 plus hacks) Ben Greear
2006-12-22 7:13 ` [PATCH] igmp: spin_lock_bh in timer (Re: BUG: soft lockup detected on CPU#0!) Jarek Poplawski
2006-12-22 7:42 ` Jarek Poplawski
2006-12-22 13:47 ` Ben Greear
2006-12-22 14:05 ` Ben Greear
2006-12-27 8:24 ` Jarek Poplawski
2006-12-27 16:16 ` Ben Greear
2006-12-28 12:56 ` Jarek Poplawski
2006-12-29 11:16 ` Jarek Poplawski
2006-12-22 9:48 ` Jarek Poplawski
2006-12-22 11:16 ` Herbert Xu
2006-12-22 12:53 ` Jarek Poplawski
2007-01-02 5:00 ` BUG: soft lockup detected on CPU#0! (2.6.18.2 plus hacks) Ben Greear
2007-01-02 7:39 ` Jarek Poplawski
2007-01-02 8:23 ` Jarek Poplawski
2007-01-02 9:23 ` Jarek Poplawski
2007-01-02 23:35 ` David Stevens
2007-01-02 23:43 ` Ben Greear
2007-01-03 8:07 ` Jarek Poplawski
2007-01-03 8:28 ` Jarek Poplawski
2007-01-03 16:53 ` Ben Greear
2007-01-03 22:14 ` David Stevens
2007-01-03 23:13 ` David Stevens
2007-01-03 23:35 ` Ben Greear [this message]
2007-01-03 23:56 ` David Stevens
2007-01-04 0:30 ` Herbert Xu
2007-01-04 1:02 ` Ben Greear
2007-01-04 1:14 ` Herbert Xu
2007-01-04 5:41 ` David Stevens
2007-01-04 5:34 ` David Stevens
2007-01-04 6:26 ` Herbert Xu
2007-01-04 8:03 ` Jarek Poplawski
2007-01-04 8:29 ` Herbert Xu
2007-01-04 8:50 ` Jarek Poplawski
2007-01-04 10:27 ` Herbert Xu
2007-01-04 11:04 ` Jarek Poplawski
2007-01-04 17:04 ` Ben Greear
2007-01-05 13:55 ` Jarek Poplawski
2007-01-04 20:33 ` David Miller
2007-01-05 6:38 ` Jarek Poplawski
2007-01-05 9:38 ` Herbert Xu
2007-01-05 11:19 ` [PATCH] devinet: inetdev_init out label moved after RCU assignment Jarek Poplawski
2007-01-05 11:23 ` Herbert Xu
2007-01-05 11:37 ` Jarek Poplawski
2007-01-09 22:38 ` David Miller
2007-01-05 19:52 ` David Stevens
2007-01-05 20:33 ` BUG: soft lockup detected on CPU#0! (2.6.18.2 plus hacks) Ben Greear
2007-01-05 20:34 ` David Miller
2007-01-08 6:53 ` Jarek Poplawski
2007-01-08 16:57 ` Ben Greear
2007-01-08 18:03 ` Stephen Hemminger
2007-01-09 8:10 ` Jarek Poplawski
2007-01-10 9:04 ` Jarek Poplawski
2007-01-10 12:50 ` Jarek Poplawski
2007-01-10 20:01 ` Stephen Hemminger
2007-01-11 7:24 ` Jarek Poplawski
2007-01-11 7:40 ` David Miller
2007-01-11 8:29 ` Jarek Poplawski
2007-01-11 8:35 ` Jarek Poplawski
2007-01-11 8:39 ` Jarek Poplawski
2007-01-11 9:27 ` David Miller
2007-01-11 11:09 ` Jarek Poplawski
2007-01-11 17:42 ` RCU info Stephen Hemminger
2007-01-12 12:19 ` Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=459C3DB8.6090603@candelatech.com \
--to=greearb@candelatech.com \
--cc=davem@davemloft.net \
--cc=dlstevens@us.ibm.com \
--cc=jarkao2@o2.pl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).