Re: [BUG] e100: eth0 appers many times in /proc/interrupts after resume

[Auke Kok <auke-jan.h.kok@intel.com>]

Frederik Deweerdt wrote:
> On Sun, Jan 21, 2007 at 09:17:41PM +0200, Andrei Popa wrote:
>> It's the 10th resume and in /proc/interrupts eth0 appers 10 times.
> 
> The e100_resume() function should be calling netif_device_detach and
> free_irq. Could you try the following (compile tested) patch?

I just fixed suspend/shutdown for e100 in 2.6.19, not sure why the problem still 
shows up. Since it's a driver/net issue, you should CC netdev on it tho, 
otherwise it might go unnoticed.

I'll open up the can-o-worms on this issue and see what's up with it.

I'm not so sure that this patch is OK, and I wonder why it stopped working, 
because I spent quite some time fixing it only a few months ago. Did swsup 
change again? sigh...

Auke

> 
> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
> 
> diff --git a/drivers/net/e100.c b/drivers/net/e100.c
> index 2fe0445..0c376e4 100644
> --- a/drivers/net/e100.c
> +++ b/drivers/net/e100.c
> @@ -2671,6 +2671,7 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
>  	del_timer_sync(&nic->watchdog);
>  	netif_carrier_off(nic->netdev);
>  
> +	netif_device_detach(netdev);
>  	pci_save_state(pdev);
>  
>  	if ((nic->flags & wol_magic) | e100_asf(nic)) {
> @@ -2682,6 +2683,7 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
>  	}
>  
>  	pci_disable_device(pdev);
> +	free_irq(pdev->irq, netdev);
>  	pci_set_power_state(pdev, PCI_D3hot);
>  
>  	return 0;
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/