From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fagyal Csongor Subject: Re: sky2 hangs Date: Fri, 02 Feb 2007 12:53:56 +0100 Message-ID: <45C32654.3060602@conceptonline.hu> References: <20070201185532.GL13130@cip.informatik.uni-erlangen.de> <42007.80.98.159.250.1170369983.squirrel@www.hunhost.com> <20070201145815.199bfe1a@freekitty> <20070202063104.GA13130@cip.informatik.uni-erlangen.de> <873b5o25zs.fsf@sonic.technologeek.org> <20070202104918.GD1693@cip.informatik.uni-erlangen.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cc: Julien BLACHE , Stephen Hemminger , linux-kernel@vger.kernel.org, netdev@vger.kernel.org To: Thomas Glanzmann Return-path: Received: from mail.interware.hu ([195.70.32.130]:60207 "EHLO mail.interware.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932666AbXBBLzZ (ORCPT ); Fri, 2 Feb 2007 06:55:25 -0500 In-Reply-To: <20070202104918.GD1693@cip.informatik.uni-erlangen.de> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Thomas Glanzmann wrote: >Hello, > > > >>Next time sky2 hangs on me I'll try to reset the PHY and see if that >>helps. I can usually trigger the hang by doing a couple of ifconfig >>up/down on the interface, though I'm not getting any error message >>from the driver when that happens. >> >> > >same for me. In dmesg is absolut nothing. I change my fix script, too. >To see if that is enough to resolv the problem. > > Well, ethtool -r eth0 did not work for me. :( This time I got nothing in the log. When I say ethtool -r eth0, I have this: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both But the interface stays down. (Maybe the other end got confused?) - Cs.