* [PATCH] Allow pktgen to work with loopback devices.
@ 2007-03-07 12:29 Josh Triplett
2007-03-09 16:49 ` Jeff Garzik
0 siblings, 1 reply; 2+ messages in thread
From: Josh Triplett @ 2007-03-07 12:29 UTC (permalink / raw)
To: linux-kernel, netdev, Jeff Garzik, Andrew Morton
pktgen currently only works on network devices with type ARPHRD_ETHER. Add
support for the loopback device, type ARPHRD_LOOPBACK.
I've tested this on my system, using a modified pktgen.conf-1-1 with
s/eth1/lo/g, and it works fine; the network device statistics confirm packet
transmission and receipt.
Thanks to Sarah Bailey for discovering and tracking down the problem.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
---
I intentionally didn't change the error message "not an ethernet device". For
the purposes of pktgen, loopback devices act like ethernet devices.
net/core/pktgen.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 74a9a32..6fc6f9d 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -1930,7 +1930,7 @@ static struct net_device *pktgen_setup_dev(struct pktgen_dev *pkt_dev)
printk("pktgen: no such netdevice: \"%s\"\n", pkt_dev->ifname);
goto out;
}
- if (odev->type != ARPHRD_ETHER) {
+ if (odev->type != ARPHRD_LOOPBACK && odev->type != ARPHRD_ETHER) {
printk("pktgen: not an ethernet device: \"%s\"\n",
pkt_dev->ifname);
goto out_put;
--
1.5.0.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] Allow pktgen to work with loopback devices.
2007-03-07 12:29 [PATCH] Allow pktgen to work with loopback devices Josh Triplett
@ 2007-03-09 16:49 ` Jeff Garzik
0 siblings, 0 replies; 2+ messages in thread
From: Jeff Garzik @ 2007-03-09 16:49 UTC (permalink / raw)
To: Josh Triplett; +Cc: linux-kernel, netdev, Andrew Morton
Josh Triplett wrote:
> pktgen currently only works on network devices with type ARPHRD_ETHER. Add
> support for the loopback device, type ARPHRD_LOOPBACK.
>
> I've tested this on my system, using a modified pktgen.conf-1-1 with
> s/eth1/lo/g, and it works fine; the network device statistics confirm packet
> transmission and receipt.
>
> Thanks to Sarah Bailey for discovering and tracking down the problem.
>
> Signed-off-by: Josh Triplett <josh@freedesktop.org>
> ---
>
> I intentionally didn't change the error message "not an ethernet device". For
> the purposes of pktgen, loopback devices act like ethernet devices.
>
> net/core/pktgen.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/net/core/pktgen.c b/net/core/pktgen.c
> index 74a9a32..6fc6f9d 100644
> --- a/net/core/pktgen.c
> +++ b/net/core/pktgen.c
> @@ -1930,7 +1930,7 @@ static struct net_device *pktgen_setup_dev(struct pktgen_dev *pkt_dev)
> printk("pktgen: no such netdevice: \"%s\"\n", pkt_dev->ifname);
> goto out;
> }
> - if (odev->type != ARPHRD_ETHER) {
> + if (odev->type != ARPHRD_LOOPBACK && odev->type != ARPHRD_ETHER) {
> printk("pktgen: not an ethernet device: \"%s\"\n",
> pkt_dev->ifname);
I'll let DaveM queue this (or not)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-09 16:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-07 12:29 [PATCH] Allow pktgen to work with loopback devices Josh Triplett
2007-03-09 16:49 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).