From: Brian Haley <brian.haley@hp.com>
To: David Miller <davem@davemloft.net>,
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Subject: [PATCH 4/4] Add loopback address type inline
Date: Thu, 05 Apr 2007 23:21:33 -0400 [thread overview]
Message-ID: <4615BCBD.2030607@hp.com> (raw)
In-Reply-To: <151538c13022864224f5ff440e1147f884abb492.1175794415.git.brian.haley@hp.com>
Add loopback address type inline to avoid calls to ipv6_addr_type().
Signed-off-by: Brian Haley <brian.haley@hp.com>
---
include/net/ipv6.h | 7 +++++++
net/ipv6/ip6_output.c | 5 +++--
net/ipv6/route.c | 8 +++-----
3 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index f3e13db..d87f421 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -388,6 +388,13 @@ static inline int ipv6_addr_any(const struct in6_addr *a)
a->s6_addr32[2] | a->s6_addr32[3] ) == 0);
}
+static inline int ipv6_addr_loopback(const struct in6_addr *a)
+{
+ return ((a->s6_addr32[0] | a->s6_addr32[1] |
+ a->s6_addr32[2] ) == 0 &&
+ a->s6_addr32[3] == htonl(0x00000001));
+}
+
/*
* find the first different bit between two addresses
* length of address must be a multiple of 32bits
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index f6aa338..7f1aabe 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -455,8 +455,9 @@ int ip6_forward(struct sk_buff *skb)
*/
if (xrlim_allow(dst, 1*HZ))
ndisc_send_redirect(skb, n, target);
- } else if (ipv6_addr_type(&hdr->saddr)&(IPV6_ADDR_MULTICAST|IPV6_ADDR_LOOPBACK
- |IPV6_ADDR_LINKLOCAL)) {
+ } else if (ipv6_addr_type_multicast(&hdr->saddr) ||
+ ipv6_addr_loopback(&hdr->saddr) ||
+ ipv6_addr_scope_linklocal(&hdr->saddr)) {
/* This check is security critical. */
goto error;
}
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 32c6398..06ee92d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1067,7 +1067,6 @@ int ip6_route_add(struct fib6_config *cfg)
struct net_device *dev = NULL;
struct inet6_dev *idev = NULL;
struct fib6_table *table;
- int addr_type;
if (cfg->fc_dst_len > 128 || cfg->fc_src_len > 128)
return -EINVAL;
@@ -1108,9 +1107,7 @@ int ip6_route_add(struct fib6_config *cfg)
cfg->fc_protocol = RTPROT_BOOT;
rt->rt6i_protocol = cfg->fc_protocol;
- addr_type = ipv6_addr_type(&cfg->fc_dst);
-
- if (addr_type & IPV6_ADDR_MULTICAST)
+ if (ipv6_addr_type_multicast(&cfg->fc_dst))
rt->u.dst.input = ip6_mc_input;
else
rt->u.dst.input = ip6_forward;
@@ -1133,7 +1130,8 @@ int ip6_route_add(struct fib6_config *cfg)
they would result in kernel looping; promote them to reject routes
*/
if ((cfg->fc_flags & RTF_REJECT) ||
- (dev && (dev->flags&IFF_LOOPBACK) && !(addr_type&IPV6_ADDR_LOOPBACK))) {
+ (dev && (dev->flags&IFF_LOOPBACK) &&
+ !ipv6_addr_loopback(&cfg->fc_dst))) {
/* hold loopback dev/idev if we haven't done so. */
if (dev != &loopback_dev) {
if (dev) {
--
1.5.0.3
next prev parent reply other threads:[~2007-04-06 3:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <11758281863002-git-send-email-brian.haley@hp.com>
2007-04-06 3:21 ` [PATCH 1/4] [IPv6] Add link and site-local scope inline Brian Haley
2007-04-06 3:24 ` YOSHIFUJI Hideaki / 吉藤英明
2007-04-06 6:37 ` Brian Haley
2007-04-06 7:00 ` YOSHIFUJI Hideaki / 吉藤英明
[not found] ` <117582818660-git-send-email-brian.haley@hp.com>
[not found] ` <11758281864173-git-send-email-brian.haley@hp.com>
[not found] ` <151538c13022864224f5ff440e1147f884abb492.1175794415.git.brian.haley@hp.com>
2007-04-06 3:21 ` [PATCH 2/4] [IPv6] Add multicast address type inline Brian Haley
2007-04-06 3:42 ` YOSHIFUJI Hideaki / 吉藤英明
2007-04-06 3:21 ` [PATCH 3/4] Add mapped " Brian Haley
2007-04-06 3:47 ` YOSHIFUJI Hideaki / 吉藤英明
2007-04-06 3:21 ` Brian Haley [this message]
2007-04-06 3:51 ` [PATCH 4/4] Add loopback " YOSHIFUJI Hideaki / 吉藤英明
2007-04-06 6:38 ` Brian Haley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4615BCBD.2030607@hp.com \
--to=brian.haley@hp.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).