netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Dumazet <dada1@cosmosbay.com>
To: Ben Greear <greearb@candelatech.com>
Cc: Andi Kleen <andi@firstfloor.org>, netdev@vger.kernel.org, bcrl@kvack.org
Subject: Re: TCP connection stops after high load.
Date: Thu, 12 Apr 2007 22:41:46 +0200	[thread overview]
Message-ID: <461E998A.8080409@cosmosbay.com> (raw)
In-Reply-To: <461E8496.2050003@candelatech.com>

Ben Greear a écrit :
> Eric Dumazet wrote:
> 
>> What "tc -s -d qdisc"
>> "ifconfig -a"
>> "cat /proc/interrupts" "cat /proc/net/sockstat" and
>> "cat /proc/net/softnet_stat" are telling ?
> 
> 
> In this test, eth2 is talking to eth3, using something similar to this
> send-to-self patch:
> http://www.candelatech.com/oss/sts.patch
> 
> 
> [root@lf1001-240 ipv4]# ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 00:30:48:89:74:60
>           inet addr:192.168.100.187  Bcast:192.168.100.255  
> Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1672220 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:1560305 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:151896589 (144.8 MiB)  TX bytes:1375280163 (1.2 GiB)
>           Interrupt:17
> 
> eth1      Link encap:Ethernet  HWaddr 00:30:48:89:74:61
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Interrupt:18
> 
> eth2      Link encap:Ethernet  HWaddr 00:07:E9:1F:CE:02
>           inet addr:20.20.20.20  Bcast:20.20.20.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:2175144684 errors:0 dropped:2 overruns:0 frame:0
>           TX packets:2196560123 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:1321380186 (1.2 GiB)  TX bytes:2274982574 (2.1 GiB)
>           Base address:0xd000 Memory:d0000000-d0020000
> 
> eth3      Link encap:Ethernet  HWaddr 00:07:E9:1F:CE:03
>           inet addr:20.20.20.30  Bcast:20.20.20.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:2196315966 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:2174900538 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:2257901986 (2.1 GiB)  TX bytes:1304493504 (1.2 GiB)
>           Base address:0xd100 Memory:d0020000-d0040000
> 
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:1159378 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:1159378 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:1133646590 (1.0 GiB)  TX bytes:1133646590 (1.0 GiB)
> 
> [root@lf1001-240 ipv4]# tc -s -d qdisc
> qdisc pfifo_fast 0: dev eth0 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 
> 1 1 1
>  Sent 1367521025 bytes 1324808 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 0bit 0pps backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 
> 1 1 1
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 0bit 0pps backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 
> 1 1 1
>  Sent 1815657070136 bytes 1536674488 pkt (dropped 0, overlimits 0 
> requeues 1448094)
>  rate 0bit 0pps backlog 0b 0p requeues 1448094
> qdisc pfifo_fast 0: dev eth3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 
> 1 1 1
>  Sent 1752033393324 bytes 1536906566 pkt (dropped 0, overlimits 0 
> requeues 1063672)
>  rate 0bit 0pps backlog 0b 0p requeues 1063672
> 
> [root@lf1001-240 ipv4]# cat /proc/interrupts
>            CPU0       CPU1
>   0:   46020594   44501954    IO-APIC-edge  timer
>   1:          9          0    IO-APIC-edge  i8042
>   7:          0          0    IO-APIC-edge  parport0
>   8:          1          0    IO-APIC-edge  rtc
>   9:          0          0   IO-APIC-level  acpi
>  12:         96          0    IO-APIC-edge  i8042
>  14:     394023     407282    IO-APIC-edge  ide0
>  16:          0          0   IO-APIC-level  uhci_hcd:usb4
>  17:    1134346    1034006   IO-APIC-level  uhci_hcd:usb3, eth0
>  18:      81605      83739   IO-APIC-level  libata, uhci_hcd:usb2, eth1
>  19:          0          0   IO-APIC-level  uhci_hcd:usb1, ehci_hcd:usb5
>  20:   53056128   46598235   IO-APIC-level  eth2
>  21:   47534577   52189674   IO-APIC-level  eth3
> NMI:          0          0
> LOC:   90485383   90485382
> ERR:          0
> MIS:          0
> 
> [root@lf1001-240 ipv4]# cat /proc/net/sockstat
> sockets: used 334
> TCP: inuse 27 orphan 0 tw 0 alloc 27 mem 360
> UDP: inuse 12
> RAW: inuse 0
> FRAG: inuse 0 memory 0
> 
> [root@lf1001-240 ipv4]# cat /proc/net/softnet_stat
> d58236f1 00000000 023badc3 00000000 00000000 00000000 00000000 00000000 
> 0004ef01
> 3a4354a1 00000000 01b57b4b 00000000 00000000 00000000 00000000 00000000 
> 0005445f
> 

Hum, could you try to bind nic irqs on separate cpus ?

eth2 -> CPU0 and eth3 -> CPU1

# echo 1 >/proc/irq/20/smp_affinity
# echo 2 >/proc/irq/21/smp_affinity



  reply	other threads:[~2007-04-12 20:41 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-11 18:50 TCP connection stops after high load Ben Greear
2007-04-11 20:26 ` Ben Greear
2007-04-11 20:48   ` David Miller
2007-04-11 21:06     ` Ben Greear
2007-04-11 21:11       ` David Miller
2007-04-11 21:31         ` Ben Greear
2007-04-11 21:39           ` David Miller
2007-04-12  2:44           ` SANGTAE HA
2007-04-12  1:06       ` Benjamin LaHaise
2007-04-12 14:48       ` Andi Kleen
2007-04-12 17:59         ` Ben Greear
2007-04-12 18:19           ` Eric Dumazet
2007-04-12 19:12             ` Ben Greear
2007-04-12 20:41               ` Eric Dumazet [this message]
2007-04-12 21:36                 ` Ben Greear
2007-04-13  7:09                   ` Evgeniy Polyakov
2007-04-13 16:42                     ` Ben Greear
2007-04-13 16:10             ` Daniel Schaffrath
2007-04-13 16:41               ` Eric Dumazet
2007-04-14  4:21                 ` Herbert Xu
2007-04-14  4:25                   ` David Miller
2007-04-14  5:31                   ` Eric Dumazet
2007-04-14  5:37                     ` David Miller
2007-04-11 20:41 ` David Miller
2007-04-12  6:12 ` Ilpo Järvinen
  -- strict thread matches above, loose matches on Subject: below --
2007-04-12 21:11 Robert Iakobashvili
2007-04-12 21:15 ` David Miller
2007-04-15 12:14   ` Robert Iakobashvili
2007-04-15 15:31     ` John Heffner
2007-04-15 15:49       ` Robert Iakobashvili
2007-04-16 18:07         ` John Heffner
2007-04-16 18:51           ` Robert Iakobashvili
2007-04-16 19:11             ` John Heffner
2007-04-16 19:17               ` David Miller
2007-04-16 19:15             ` David Miller
2007-04-17  7:58               ` Robert Iakobashvili
2007-04-17 19:39                 ` David Miller
2007-04-17 19:47                   ` John Heffner
2007-04-17 19:51                     ` David Miller
2007-04-17 19:58                   ` Robert Iakobashvili
2007-04-15 13:52   ` Robert Iakobashvili

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=461E998A.8080409@cosmosbay.com \
    --to=dada1@cosmosbay.com \
    --cc=andi@firstfloor.org \
    --cc=bcrl@kvack.org \
    --cc=greearb@candelatech.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).