From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-2?Q?Rafa=B3_Bilski?= Subject: Re: Natsemi DP83815 driver spaming Date: Thu, 03 May 2007 08:33:17 +0200 Message-ID: <4639822D.2060302@interia.pl> References: <46379A7E.3000109@interia.pl> <20070501212750.GC31630@sirena.org.uk> <46382798.2090709@interia.pl> <463830E1.8080107@interia.pl> <20070502082211.GD31630@sirena.org.uk> <4638EF0B.9050701@interia.pl> <20070502214128.GA4814@sirena.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: Tim Hockin , linux-kernel@vger.kernel.org, netdev@vger.kernel.org To: Mark Brown Return-path: Received: from smtp35.poczta.interia.pl ([80.48.65.35]:38965 "EHLO smtp4.poczta.interia.pl" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754705AbXECGde (ORCPT ); Thu, 3 May 2007 02:33:34 -0400 In-Reply-To: <20070502214128.GA4814@sirena.org.uk> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org >> What about module option? >=20 > That would work, though you crossed in the post with me writing a pat= ch > adding a sysfs file; I merged the two for overkill (below). I also h= ave > a patch which changes the log message for the workaround so that it i= s > displayed by default in order to make this easier to diagnose. Applied. I set default value to 0. Flashed. However > + if (!NATSEMI_CREATE_FILE(pdev, dspcfg_workaround)) > + goto err_create_file; is going to err_create_file. Without these lines drivers works fine. Rafa=B3 ---------------------------------------------------------------------- NIE KUPUJ!!! =2E..zanim nie porownasz cen >> http://link.interia.pl/f1a5e