[PATCH 0/3] myri10ge updates for 2.6.22

[PATCH 0/3] myri10ge updates for 2.6.22

[Brice Goglin]

Hi Jeff,

Here's a small patchset for myri10ge in 2.6.22:
1) report link up/down in standard ethtool way
2) limit the number of recoveries
3) update driver version

Please apply.

Thanks!
Brice

[PATCH 1/3] myri10ge: report link up/down in standard ethtool way

[Brice Goglin]

Report link up/down in standard ethtool way

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |    1 +
 1 file changed, 1 insertion(+)

Index: linux-rc/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-rc.orig/drivers/net/myri10ge/myri10ge.c	2007-05-26 11:18:09.000000000 +0200
+++ linux-rc/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:22.000000000 +0200
@@ -1472,6 +1472,7 @@
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,
 	.set_tso = ethtool_op_set_tso,
+	.get_link = ethtool_op_get_link,
 	.get_strings = myri10ge_get_strings,
 	.get_stats_count = myri10ge_get_stats_count,
 	.get_ethtool_stats = myri10ge_get_ethtool_stats,

Re: [PATCH 1/3] myri10ge: report link up/down in standard ethtool way

[Jeff Garzik]

Brice Goglin wrote:
> Report link up/down in standard ethtool way
> 
> Signed-off-by: Brice Goglin <brice@myri.com>
> ---
>  drivers/net/myri10ge/myri10ge.c |    1 +
>  1 file changed, 1 insertion(+)

applied to #upstream-fixes

[PATCH 2/3] myri10ge: limit the number of recoveries

[Brice Goglin]

Limit the number of recoveries from a NIC hw watchdog reset to 1 by default.
It enables detection of defective NICs immediately since these memory parity
errors are expected to happen very rarely (less than once per century*NIC).
However, a defective NIC (very rare, fortunately) can see such an error
quite often, ie. every few minutes under high load.

Make the limit tunable to allow people with mission critical installations
to crank up the tunable and recover an INTMAX number of times while waiting
for a downtime window to replace the NIC. The performance won't be optimal,
but at least, it will still work.

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

Index: linux-rc/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-rc.orig/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:22.000000000 +0200
+++ linux-rc/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:34.000000000 +0200
@@ -279,6 +279,11 @@
 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
 
+static int myri10ge_reset_recover = 1;
+module_param(myri10ge_reset_recover, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_reset_recover,
+		 "Number of recoveries allowed from NIC hw reset\n");
+
 static int myri10ge_wcfifo = 0;
 module_param(myri10ge_wcfifo, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
@@ -2730,8 +2735,14 @@
 		 * For now, just report it */
 		reboot = myri10ge_read_reboot(mgp);
 		printk(KERN_ERR
-		       "myri10ge: %s: NIC rebooted (0x%x), resetting\n",
-		       mgp->dev->name, reboot);
+		       "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
+		       mgp->dev->name, reboot,
+		       myri10ge_reset_recover ? " " : " not");
+		if (myri10ge_reset_recover == 0)
+			return;
+
+		myri10ge_reset_recover--;
+
 		/*
 		 * A rebooted nic will come back with config space as
 		 * it was after power was applied to PCIe bus.

Re: [PATCH 2/3] myri10ge: limit the number of recoveries

[Jeff Garzik]

Brice Goglin wrote:
> Limit the number of recoveries from a NIC hw watchdog reset to 1 by default.
> It enables detection of defective NICs immediately since these memory parity
> errors are expected to happen very rarely (less than once per century*NIC).
> However, a defective NIC (very rare, fortunately) can see such an error
> quite often, ie. every few minutes under high load.
> 
> Make the limit tunable to allow people with mission critical installations
> to crank up the tunable and recover an INTMAX number of times while waiting
> for a downtime window to replace the NIC. The performance won't be optimal,
> but at least, it will still work.
> 
> Signed-off-by: Brice Goglin <brice@myri.com>
> ---
>  drivers/net/myri10ge/myri10ge.c |   15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)

NAK.  Random broken (unrelated to silicon errata) can happen in any 
field installation, and manifest itself in any number of ways.

If defective NICs are truly rare, it does not sound worth adding this 
workaround to the driver.

If I had to guess, this is a meaningless gesture (from a technical 
standpoint) for a Big Customer(tm) who is currently throwing a 
temper-tantrum... :)

By definition if you can give them a patch, and they can wait for the 
driver patch going upstream, then it is not a "mission critical" 
situation, otherwise they would already have the patch direct from you. 
  Also, "mission critical" tends to imply that you cannot remove the 
driver from operation either, which is counter to the logic of patching 
a driver for the problem.

	Jeff

[PATCH 0/1] myri10ge: limit the number of recoveries

[Brice Goglin]

Jeff Garzik wrote:
> Brice Goglin wrote:
>> Limit the number of recoveries from a NIC hw watchdog reset to 1 by
>> default.
>> It enables detection of defective NICs immediately since these memory
>> parity
>> errors are expected to happen very rarely (less than once per
>> century*NIC).
>> However, a defective NIC (very rare, fortunately) can see such an error
>> quite often, ie. every few minutes under high load.
>>
>> Make the limit tunable to allow people with mission critical
>> installations
>> to crank up the tunable and recover an INTMAX number of times while
>> waiting
>> for a downtime window to replace the NIC. The performance won't be
>> optimal,
>> but at least, it will still work.
>>
>> Signed-off-by: Brice Goglin <brice@myri.com>
>> ---
>>  drivers/net/myri10ge/myri10ge.c |   15 +++++++++++++--
>>  1 file changed, 13 insertions(+), 2 deletions(-)
>
> NAK.

Ok...
Then please apply the following patch which limits the number of
recovery to 1 without making it tunable. It will at least enable
detection of bad NICs.

Brice

[PATCH 1/1] myri10ge: limit the number of recoveries

[Brice Goglin]

Limit the number of recoveries from a NIC hw watchdog reset to 1 by default.
It enables detection of defective NICs immediately since these memory parity
errors are expected to happen very rarely (less than once per century*NIC).

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

Index: linux-rc/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-rc.orig/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:22.000000000 +0200
+++ linux-rc/drivers/net/myri10ge/myri10ge.c	2007-06-04 19:01:54.000000000 +0200
@@ -279,6 +279,8 @@
 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
 
+static int myri10ge_reset_recover = 1;
+
 static int myri10ge_wcfifo = 0;
 module_param(myri10ge_wcfifo, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
@@ -2730,8 +2732,14 @@
 		 * For now, just report it */
 		reboot = myri10ge_read_reboot(mgp);
 		printk(KERN_ERR
-		       "myri10ge: %s: NIC rebooted (0x%x), resetting\n",
-		       mgp->dev->name, reboot);
+		       "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
+		       mgp->dev->name, reboot,
+		       myri10ge_reset_recover ? " " : " not");
+		if (myri10ge_reset_recover == 0)
+			return;
+
+		myri10ge_reset_recover--;
+
 		/*
 		 * A rebooted nic will come back with config space as
 		 * it was after power was applied to PCIe bus.

[PATCH 3/3] myri10ge: update driver version

[Brice Goglin]

Update driver version to 1.3.1-1.245.

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-rc/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-rc.orig/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:34.000000000 +0200
+++ linux-rc/drivers/net/myri10ge/myri10ge.c	2007-05-30 20:58:41.000000000 +0200
@@ -71,7 +71,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.0-1.233"
+#define MYRI10GE_VERSION_STR "1.3.1-1.245"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");

[PATCH 0/3] myri10ge updates

[Brice Goglin]

Hi Jeff,

Here are 3 minor updates of myri10ge for 2.6.22. The first one is a
reduced version of the earlier nacked patch, it now limits the number of
recoveries (to detect bad nics) without making the limit tunable.

1. limit the number of recoveries
2. report when the link partner is running in Myrinet mode
3. update driver version

Please apply.
Thanks!
Brice

[PATCH 3/3] myri10ge: update driver version

[Brice Goglin]

Update myri10ge driver version to 1.3.1-1.248.

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-rc/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-rc.orig/drivers/net/myri10ge/myri10ge.c	2007-06-11 20:04:57.000000000 +0200
+++ linux-rc/drivers/net/myri10ge/myri10ge.c	2007-06-11 20:05:09.000000000 +0200
@@ -71,7 +71,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.0-1.233"
+#define MYRI10GE_VERSION_STR "1.3.1-1.248"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");