* e100 resume failure
@ 2007-05-31 3:37 Andrew Morton
2007-06-05 15:21 ` Kok, Auke
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Morton @ 2007-05-31 3:37 UTC (permalink / raw)
To: Auke Kok; +Cc: netdev
I was doing some suspend-to-ram testing on the Vaio with the 2.6.22-rc3-mm1
lineup. After 10 or 15 cycles a resume failed:
[ 357.119436] Suspending device full
[ 357.120450] Suspending device zero
[ 358.084978] Suspending device port
[ 358.085664] Suspending device null
[ 358.086432] Suspending device kmem
[ 358.087200] Suspending device mem
[ 358.087975] Suspending device 00:09
[ 358.088764] Suspending device 00:08
[ 358.089546] Suspending device 00:07
[ 358.090343] Suspending device 00:06
[ 358.091125] Suspending device 00:05
[ 358.091912] Suspending device 00:04
[ 358.092702] Suspending device 00:03
[ 358.093486] Suspending device 00:02
[ 358.094272] Suspending device 00:01
[ 358.095074] Suspending device 00:00
[ 358.095863] Suspending device pnp0
[ 358.096672] Suspending device 0000:06
[ 358.097482] Suspending device 0000:07
[ 358.098275] Suspending device 0000:06:0b.0
[ 358.101644] Suspending device 0000:06:08.0
[18014750.543703] ATA: abnormal status 0x7F on port 0x000118af
[18014750.555105] e100: eth0: e100_exec_cb_wait: ucode load failed
and the machine hung.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: e100 resume failure
2007-05-31 3:37 e100 resume failure Andrew Morton
@ 2007-06-05 15:21 ` Kok, Auke
0 siblings, 0 replies; 2+ messages in thread
From: Kok, Auke @ 2007-06-05 15:21 UTC (permalink / raw)
To: Andrew Morton; +Cc: netdev
Andrew Morton wrote:
> I was doing some suspend-to-ram testing on the Vaio with the 2.6.22-rc3-mm1
> lineup. After 10 or 15 cycles a resume failed:
>
> [ 357.119436] Suspending device full
> [ 357.120450] Suspending device zero
> [ 358.084978] Suspending device port
> [ 358.085664] Suspending device null
> [ 358.086432] Suspending device kmem
> [ 358.087200] Suspending device mem
> [ 358.087975] Suspending device 00:09
> [ 358.088764] Suspending device 00:08
> [ 358.089546] Suspending device 00:07
> [ 358.090343] Suspending device 00:06
> [ 358.091125] Suspending device 00:05
> [ 358.091912] Suspending device 00:04
> [ 358.092702] Suspending device 00:03
> [ 358.093486] Suspending device 00:02
> [ 358.094272] Suspending device 00:01
> [ 358.095074] Suspending device 00:00
> [ 358.095863] Suspending device pnp0
> [ 358.096672] Suspending device 0000:06
> [ 358.097482] Suspending device 0000:07
> [ 358.098275] Suspending device 0000:06:0b.0
> [ 358.101644] Suspending device 0000:06:08.0
> [18014750.543703] ATA: abnormal status 0x7F on port 0x000118af
> [18014750.555105] e100: eth0: e100_exec_cb_wait: ucode load failed
>
> and the machine hung.
I've been wondering about this one for a while but apart from a freak of nature
nothing comes up and I have not seen this before. I'll try to keep an eye open
for it.
Auke
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-06-05 15:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-31 3:37 e100 resume failure Andrew Morton
2007-06-05 15:21 ` Kok, Auke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).