Please pull 'libertas' branch of wireless-2.6

Please pull 'libertas' branch of wireless-2.6

[John W. Linville]

[-- Attachment #1: Type: text/plain, Size: 6724 bytes --]

Lots of stuff here...probably best for 2.6.23...

The following changes since commit c420bc9f09a0926b708c3edb27eacba434a4f4ba:
  Linus Torvalds (1):
        Linux 2.6.22-rc3

are found in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas

Chris Ball (1):
      libertas: wakeup both mesh and normal wakeup when getting out of scan

Dan Williams (25):
      libertas: call SET_NETDEV_DEV from common code
      libertas: replace 'macaddress' with 'bssid'
      libertas: correctly unregister mesh netdev on error
      libertas: don't tear down netdev in libertas_activate_card
      libertas: make scan result handling more flexible
      libertas: fix 'keep previous scan' behavior
      libertas: move channel changing into association framework
      libertas: make association paths consistent
      libertas: use MAC_FMT and MAC_ARG where appropriate
      libertas: use compare_ether_addr() rather than memcmp() where appropriate
      libertas: fix debug enter/leave prints for libertas_execute_next_command
      libertas: correctly balance locking in libertas_process_rx_command
      libertas: correct error report paths for wlan_fwt_list_ioctl
      libertas: fix deadlock SIOCGIWSCAN handler
      libertas: fix default adhoc channel
      libertas: honor specific channel requests during association
      libertas: send SIOCGIWSCAN event after partial scans too
      libertas: debug print spacing fixes in assoc.c
      libertas: add more verbose debugging to libertas_cmd_80211_authenticate
      libertas: Make WPA work through supplicant handshake
      libertas: sparse fixes
      libertas: tweak association debug output
      libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
      libertas: remove WPA_SUPPLICANT structure
      libertas: reduce SSID and BSSID mixed-case abuse

David Woodhouse (6):
      libertas: fix character set in README
      libertas: first pass at fixing up endianness issues
      libertas: More endianness fixes.
      libertas: more endianness fixes, in tx.c this time
      libertas: don't byte-swap firmware version number. It's a byte array.
      libertas: fix big-endian associate command.

Holger Schurig (23):
      libertas: rename wlan_association_worker
      libertas: a debug output was missing a newline
      libertas: fix removal of all debugfs files
      libertas: remove __FILE__ from debug output
      libertas: remove unused/superfluous definitions of DEV_NAME_LEN
      libertas: move vendor & product id's into if_usb.c
      libertas: make libertas_wlan_data_rates static
      libertas: exclude non-used code when PROC_DEBUG is not set
      libertas: make debug configurable
      libertas: tune debug code
      libertas: single out mesh code
      libertas: change debug output of libertas_interrupt()
      libertas: get rid of libertas_sbi_get_priv()
      libertas: fix SSID output
      libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to kzalloc()
      libertas: move reset_device() code main.c to if_usb.c
      libertas: split wlan_add_card()
      libertas: indirect all hardware access via hw_XXXX functions
      libertas: move contents of fw.h to decl.h
      libertas: split module into two (libertas.ko and usb8xxx.ko)
      libertas: fix RESET logic at unload time
      libertas: let DRV_NAME be overridable
      libertas: remove unused variables in wlan_dev_t

Javier Cardona (2):
      libertas: fixed transmission flow control on the mesh interface
      libertas: added transmission failures to mesh statistics

Luis Carlos Cobo (4):
      libertas: fixed incorrect assigment of fcs errors to frag errors
      libertas: add URB debug info
      libertas: fixed kernel oops on module/card removal
      libertas: updated mesh commands for 5.220.9.p11

Luis Carlos Cobo Rus (6):
      libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
      libertas: cleanup of fwt_list_route processing
      libertas: updated readme file
      libertas: make mac address configuration work with mesh interface too
      libertas: split wext for eth and msh
      libertas: support for mesh autostart on firmware 5.220.11

Marcelo Tosatti (5):
      libertas: scan two channels per scan command
      libertas: remove deprecated pm_register and associated code
      libertas: fix scanning from associate path
      libertas: fix error handling of card initialization
      libertas: fix oops on rmmod

 drivers/net/wireless/Kconfig               |   19 +-
 drivers/net/wireless/libertas/11d.c        |  152 ++--
 drivers/net/wireless/libertas/11d.h        |    6 +-
 drivers/net/wireless/libertas/Makefile     |    4 +-
 drivers/net/wireless/libertas/README       |   52 +-
 drivers/net/wireless/libertas/assoc.c      |  345 +++++---
 drivers/net/wireless/libertas/assoc.h      |    8 +-
 drivers/net/wireless/libertas/cmd.c        |  559 +++++------
 drivers/net/wireless/libertas/cmdresp.c    |  375 ++++----
 drivers/net/wireless/libertas/debugfs.c    |  432 ++++----
 drivers/net/wireless/libertas/decl.h       |   20 +-
 drivers/net/wireless/libertas/defs.h       |  101 ++-
 drivers/net/wireless/libertas/dev.h        |   98 +-
 drivers/net/wireless/libertas/ethtool.c    |   55 +-
 drivers/net/wireless/libertas/fw.c         |  111 +--
 drivers/net/wireless/libertas/fw.h         |   13 -
 drivers/net/wireless/libertas/host.h       |   13 +-
 drivers/net/wireless/libertas/hostcmd.h    |  392 ++++----
 drivers/net/wireless/libertas/if_bootcmd.c |    6 +-
 drivers/net/wireless/libertas/if_usb.c     |  448 +++++----
 drivers/net/wireless/libertas/if_usb.h     |   32 +-
 drivers/net/wireless/libertas/ioctl.c      |  286 ++++--
 drivers/net/wireless/libertas/join.c       |  464 ++++-----
 drivers/net/wireless/libertas/join.h       |   13 +-
 drivers/net/wireless/libertas/main.c       |  673 ++++++-------
 drivers/net/wireless/libertas/rx.c         |   63 +-
 drivers/net/wireless/libertas/sbi.h        |   40 -
 drivers/net/wireless/libertas/scan.c       | 1529 +++++++++++++---------------
 drivers/net/wireless/libertas/scan.h       |   81 +-
 drivers/net/wireless/libertas/thread.h     |    8 +-
 drivers/net/wireless/libertas/tx.c         |   74 +-
 drivers/net/wireless/libertas/types.h      |   63 +-
 drivers/net/wireless/libertas/wext.c       |  778 ++++++++-------
 drivers/net/wireless/libertas/wext.h       |   13 +-
 34 files changed, 3679 insertions(+), 3647 deletions(-)
 delete mode 100644 drivers/net/wireless/libertas/fw.h
 delete mode 100644 drivers/net/wireless/libertas/sbi.h

Omnibus patch attached as "libertas.patch.bz2" due to size concerns.
-- 
John W. Linville
linville@tuxdriver.com

[-- Attachment #2: libertas.patch.bz2 --]
[-- Type: application/x-bzip2, Size: 76006 bytes --]

Re: Please pull 'libertas' branch of wireless-2.6

[Jeff Garzik]

John W. Linville wrote:
> Lots of stuff here...probably best for 2.6.23...

Is this best for Linux users... or just easy for developers?

Won't putting off all these fixes until 2.6.23 leave the driver released 
in 2.6.22 in shoddy shape?

libertas is upstream now, so we cannot pretend that the driver is 
completely independent from upstream release cycles and maintenance.

libertas fixes should go upstream immediately, since we are in a bugfix 
cycle, and since libertas (from upstream perspective) is about to make 
its big debut on the world stage.

	Jeff

Re: Please pull 'libertas' branch of wireless-2.6

[Dan Williams]

On Wed, 2007-05-30 at 10:07 -0400, Jeff Garzik wrote:
> John W. Linville wrote:
> > Lots of stuff here...probably best for 2.6.23...
> 
> Is this best for Linux users... or just easy for developers?
> 
> Won't putting off all these fixes until 2.6.23 leave the driver released 
> in 2.6.22 in shoddy shape?

Not really; it more or less works there.  What's gone on since then is
general driver cleanup (Christoph's comments and more), splitting the
driver so that other bus types can use it (SDIO for example once
Pierre's SDIO patches get upstream), wireless extensions fixes, etc.

> libertas is upstream now, so we cannot pretend that the driver is 
> completely independent from upstream release cycles and maintenance.

True, but some of the stuff in here I didn't think would be suitable
during an -rc cycle, for example the driver splitting and the cleanups
that don't impact function at all, but are good to do nonetheless.

> libertas fixes should go upstream immediately, since we are in a bugfix 
> cycle, and since libertas (from upstream perspective) is about to make 
> its big debut on the world stage.

If you think all the bits from this should just go to 2.6.22, that's
fine with me.  But I don't feel comfortable making that call given what
I thought were the constraints on pushing changes through during an rc
cycle.  When the merge window was open, we backported critical bug fixes
and necessary merge-requirement cleanups to the code in linville's tree,
but avoided changes that didn't impact function.

Dan

Re: Please pull 'libertas' branch of wireless-2.6

[Dan Williams]

On Wed, 2007-05-30 at 11:28 -0400, Dan Williams wrote:
> On Wed, 2007-05-30 at 10:07 -0400, Jeff Garzik wrote:
> > John W. Linville wrote:
> > > Lots of stuff here...probably best for 2.6.23...
> > 
> > Is this best for Linux users... or just easy for developers?
> > 
> > Won't putting off all these fixes until 2.6.23 leave the driver released 
> > in 2.6.22 in shoddy shape?
> 
> Not really; it more or less works there.  What's gone on since then is
> general driver cleanup (Christoph's comments and more), splitting the
> driver so that other bus types can use it (SDIO for example once
> Pierre's SDIO patches get upstream), wireless extensions fixes, etc.
> 
> > libertas is upstream now, so we cannot pretend that the driver is 
> > completely independent from upstream release cycles and maintenance.
> 
> True, but some of the stuff in here I didn't think would be suitable
> during an -rc cycle, for example the driver splitting and the cleanups
> that don't impact function at all, but are good to do nonetheless.
> 
> > libertas fixes should go upstream immediately, since we are in a bugfix 
> > cycle, and since libertas (from upstream perspective) is about to make 
> > its big debut on the world stage.
> 
> If you think all the bits from this should just go to 2.6.22, that's
> fine with me.  But I don't feel comfortable making that call given what
> I thought were the constraints on pushing changes through during an rc
> cycle.  When the merge window was open, we backported critical bug fixes
> and necessary merge-requirement cleanups to the code in linville's tree,
> but avoided changes that didn't impact function.

Any response on these points yet?  I've got yet more cleanups and a few
other things queued in libertas-2.6 but I'd like to see where this
discussion goes before sending a pull request for the new bits.

Dan

> Dan
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Please pull 'libertas' branch of wireless-2.6

[John W. Linville]

On Thu, May 31, 2007 at 05:13:17PM -0400, Dan Williams wrote:
> On Wed, 2007-05-30 at 11:28 -0400, Dan Williams wrote:
> > On Wed, 2007-05-30 at 10:07 -0400, Jeff Garzik wrote:
> > > John W. Linville wrote:
> > > > Lots of stuff here...probably best for 2.6.23...
> > > 
> > > Is this best for Linux users... or just easy for developers?
> > > 
> > > Won't putting off all these fixes until 2.6.23 leave the driver released 
> > > in 2.6.22 in shoddy shape?

> > If you think all the bits from this should just go to 2.6.22, that's
> > fine with me.  But I don't feel comfortable making that call given what
> > I thought were the constraints on pushing changes through during an rc
> > cycle.  When the merge window was open, we backported critical bug fixes
> > and necessary merge-requirement cleanups to the code in linville's tree,
> > but avoided changes that didn't impact function.
> 
> Any response on these points yet?  I've got yet more cleanups and a few
> other things queued in libertas-2.6 but I'd like to see where this
> discussion goes before sending a pull request for the new bits.

As for me, I have no great problem w/ the whole batch going to 2.6.22.
The driver is still new and most acknowledge it still has significant
defficiencies.  Most (but probably not all) of the patches would seem
to fit some definition of bug fix anyway.  I was just trying to err
on the side of caution and follow the normal "bugfixes in -rc" process.

Jeff, the branch in question is based off a vanilla 2.6.22-rc3.
So it is safe to pull (from a "won't mess-up my tree" perspective)
if you are so inclined.

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Please pull 'libertas' branch of wireless-2.6

[Dan Williams]

On Thu, 2007-05-31 at 17:16 -0400, John W. Linville wrote:
> On Thu, May 31, 2007 at 05:13:17PM -0400, Dan Williams wrote:
> > On Wed, 2007-05-30 at 11:28 -0400, Dan Williams wrote:
> > > On Wed, 2007-05-30 at 10:07 -0400, Jeff Garzik wrote:
> > > > John W. Linville wrote:
> > > > > Lots of stuff here...probably best for 2.6.23...
> > > > 
> > > > Is this best for Linux users... or just easy for developers?
> > > > 
> > > > Won't putting off all these fixes until 2.6.23 leave the driver released 
> > > > in 2.6.22 in shoddy shape?
> 
> > > If you think all the bits from this should just go to 2.6.22, that's
> > > fine with me.  But I don't feel comfortable making that call given what
> > > I thought were the constraints on pushing changes through during an rc
> > > cycle.  When the merge window was open, we backported critical bug fixes
> > > and necessary merge-requirement cleanups to the code in linville's tree,
> > > but avoided changes that didn't impact function.
> > 
> > Any response on these points yet?  I've got yet more cleanups and a few
> > other things queued in libertas-2.6 but I'd like to see where this
> > discussion goes before sending a pull request for the new bits.
> 
> As for me, I have no great problem w/ the whole batch going to 2.6.22.
> The driver is still new and most acknowledge it still has significant
> defficiencies.  Most (but probably not all) of the patches would seem
> to fit some definition of bug fix anyway.  I was just trying to err
> on the side of caution and follow the normal "bugfixes in -rc" process.
> 
> Jeff, the branch in question is based off a vanilla 2.6.22-rc3.
> So it is safe to pull (from a "won't mess-up my tree" perspective)
> if you are so inclined.

Ok; if Jeff is so inclined, we'll push further libertas
cleanups/bugfixes/etc to you, and then you upstream to Jeff, targetted
for inclusion in 2.6.22.

Dan

Please pull 'libertas' branch of wireless-2.6

[John W. Linville]

[-- Attachment #1: Type: text/plain, Size: 6911 bytes --]

Jeff,

This is the same as the previous pull request, only rebased on
2.6.22-rc4.  Since this is a big pull already, I didn't want to
complicate it with the additional patches identified by the libertas
team as 2.6.22-worthy.

John

---

The following changes since commit 5ecd3100e695228ac5e0ce0e325e252c0f11806f:
  Linus Torvalds (1):
        Linux 2.6.22-rc4

are found in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas

Chris Ball (1):
      libertas: wakeup both mesh and normal wakeup when getting out of scan

Dan Williams (25):
      libertas: call SET_NETDEV_DEV from common code
      libertas: replace 'macaddress' with 'bssid'
      libertas: correctly unregister mesh netdev on error
      libertas: don't tear down netdev in libertas_activate_card
      libertas: make scan result handling more flexible
      libertas: fix 'keep previous scan' behavior
      libertas: move channel changing into association framework
      libertas: make association paths consistent
      libertas: use MAC_FMT and MAC_ARG where appropriate
      libertas: use compare_ether_addr() rather than memcmp() where appropriate
      libertas: fix debug enter/leave prints for libertas_execute_next_command
      libertas: correctly balance locking in libertas_process_rx_command
      libertas: correct error report paths for wlan_fwt_list_ioctl
      libertas: fix deadlock SIOCGIWSCAN handler
      libertas: fix default adhoc channel
      libertas: honor specific channel requests during association
      libertas: send SIOCGIWSCAN event after partial scans too
      libertas: debug print spacing fixes in assoc.c
      libertas: add more verbose debugging to libertas_cmd_80211_authenticate
      libertas: Make WPA work through supplicant handshake
      libertas: sparse fixes
      libertas: tweak association debug output
      libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
      libertas: remove WPA_SUPPLICANT structure
      libertas: reduce SSID and BSSID mixed-case abuse

David Woodhouse (6):
      libertas: fix character set in README
      libertas: first pass at fixing up endianness issues
      libertas: More endianness fixes.
      libertas: more endianness fixes, in tx.c this time
      libertas: don't byte-swap firmware version number. It's a byte array.
      libertas: fix big-endian associate command.

Holger Schurig (23):
      libertas: rename wlan_association_worker
      libertas: a debug output was missing a newline
      libertas: fix removal of all debugfs files
      libertas: remove __FILE__ from debug output
      libertas: remove unused/superfluous definitions of DEV_NAME_LEN
      libertas: move vendor & product id's into if_usb.c
      libertas: make libertas_wlan_data_rates static
      libertas: exclude non-used code when PROC_DEBUG is not set
      libertas: make debug configurable
      libertas: tune debug code
      libertas: single out mesh code
      libertas: change debug output of libertas_interrupt()
      libertas: get rid of libertas_sbi_get_priv()
      libertas: fix SSID output
      libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to kzalloc()
      libertas: move reset_device() code main.c to if_usb.c
      libertas: split wlan_add_card()
      libertas: indirect all hardware access via hw_XXXX functions
      libertas: move contents of fw.h to decl.h
      libertas: split module into two (libertas.ko and usb8xxx.ko)
      libertas: fix RESET logic at unload time
      libertas: let DRV_NAME be overridable
      libertas: remove unused variables in wlan_dev_t

Javier Cardona (2):
      libertas: fixed transmission flow control on the mesh interface
      libertas: added transmission failures to mesh statistics

Luis Carlos Cobo (4):
      libertas: fixed incorrect assigment of fcs errors to frag errors
      libertas: add URB debug info
      libertas: fixed kernel oops on module/card removal
      libertas: updated mesh commands for 5.220.9.p11

Luis Carlos Cobo Rus (6):
      libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
      libertas: cleanup of fwt_list_route processing
      libertas: updated readme file
      libertas: make mac address configuration work with mesh interface too
      libertas: split wext for eth and msh
      libertas: support for mesh autostart on firmware 5.220.11

Marcelo Tosatti (5):
      libertas: scan two channels per scan command
      libertas: remove deprecated pm_register and associated code
      libertas: fix scanning from associate path
      libertas: fix error handling of card initialization
      libertas: fix oops on rmmod

 drivers/net/wireless/Kconfig               |   19 +-
 drivers/net/wireless/libertas/11d.c        |  152 ++--
 drivers/net/wireless/libertas/11d.h        |    6 +-
 drivers/net/wireless/libertas/Makefile     |    4 +-
 drivers/net/wireless/libertas/README       |   52 +-
 drivers/net/wireless/libertas/assoc.c      |  345 +++++---
 drivers/net/wireless/libertas/assoc.h      |    8 +-
 drivers/net/wireless/libertas/cmd.c        |  559 +++++------
 drivers/net/wireless/libertas/cmdresp.c    |  375 ++++----
 drivers/net/wireless/libertas/debugfs.c    |  432 ++++----
 drivers/net/wireless/libertas/decl.h       |   20 +-
 drivers/net/wireless/libertas/defs.h       |  101 ++-
 drivers/net/wireless/libertas/dev.h        |   98 +-
 drivers/net/wireless/libertas/ethtool.c    |   55 +-
 drivers/net/wireless/libertas/fw.c         |  111 +--
 drivers/net/wireless/libertas/fw.h         |   13 -
 drivers/net/wireless/libertas/host.h       |   13 +-
 drivers/net/wireless/libertas/hostcmd.h    |  392 ++++----
 drivers/net/wireless/libertas/if_bootcmd.c |    6 +-
 drivers/net/wireless/libertas/if_usb.c     |  448 +++++----
 drivers/net/wireless/libertas/if_usb.h     |   32 +-
 drivers/net/wireless/libertas/ioctl.c      |  286 ++++--
 drivers/net/wireless/libertas/join.c       |  464 ++++-----
 drivers/net/wireless/libertas/join.h       |   13 +-
 drivers/net/wireless/libertas/main.c       |  673 ++++++-------
 drivers/net/wireless/libertas/rx.c         |   63 +-
 drivers/net/wireless/libertas/sbi.h        |   40 -
 drivers/net/wireless/libertas/scan.c       | 1529 +++++++++++++---------------
 drivers/net/wireless/libertas/scan.h       |   81 +-
 drivers/net/wireless/libertas/thread.h     |    8 +-
 drivers/net/wireless/libertas/tx.c         |   74 +-
 drivers/net/wireless/libertas/types.h      |   63 +-
 drivers/net/wireless/libertas/wext.c       |  778 ++++++++-------
 drivers/net/wireless/libertas/wext.h       |   13 +-
 34 files changed, 3679 insertions(+), 3647 deletions(-)
 delete mode 100644 drivers/net/wireless/libertas/fw.h
 delete mode 100644 drivers/net/wireless/libertas/sbi.h

Omnibus patch attached as "libertas.diff.bz2" due to size concerns.
-- 
John W. Linville
linville@tuxdriver.com

[-- Attachment #2: libertas.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 75879 bytes --]

Please pull 'libertas-fixes' branch of wireless-2.6

[John W. Linville]

Fixes identified by the libertas team as important for 2.6.22...

---

The following changes since commit 717c9339202a42ae7bec7d3c4b84deecdcae9f81:
  Dan Williams (1):
        libertas: reduce SSID and BSSID mixed-case abuse

are found in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-fixes

Dan Williams (1):
      libertas: actually send mesh frames to mesh netdev

Luis Carlos (1):
      libertas: convert libertas_mpp into anycast_mask

Luis Carlos Cobo Rus (2):
      libertas: pull current channel from firmware on mesh autostart
      libertas: deauthenticate from AP in channel switch

 drivers/net/wireless/libertas/assoc.c   |   13 +++++++++++++
 drivers/net/wireless/libertas/assoc.h   |    2 ++
 drivers/net/wireless/libertas/cmdresp.c |    1 +
 drivers/net/wireless/libertas/dev.h     |    1 +
 drivers/net/wireless/libertas/host.h    |    4 ++--
 drivers/net/wireless/libertas/main.c    |   27 ++++++++++++++-------------
 drivers/net/wireless/libertas/rx.c      |    5 ++---
 7 files changed, 35 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index ee82413..f67efa0 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -200,6 +200,14 @@ static int update_channel(wlan_private * priv)
 				    cmd_option_waitforrsp, 0, NULL);
 }
 
+void libertas_sync_channel(struct work_struct *work)
+{
+	wlan_private *priv = container_of(work, wlan_private, sync_channel);
+
+	if (update_channel(priv) != 0)
+		lbs_pr_info("Channel synchronization failed.");
+}
+
 static int assoc_helper_channel(wlan_private *priv,
                                 struct assoc_request * assoc_req)
 {
@@ -403,6 +411,11 @@ static int should_deauth_infrastructure(wlan_adapter *adapter,
 		return 1;
 	}
 
+	if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) {
+		lbs_deb_assoc("Deauthenticating due to channel switch.\n");
+		return 1;
+	}
+
 	/* FIXME: deal with 'auto' mode somehow */
 	if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
 		if (assoc_req->mode != IW_MODE_INFRA)
diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h
index b5eddf8..5e9c31f 100644
--- a/drivers/net/wireless/libertas/assoc.h
+++ b/drivers/net/wireless/libertas/assoc.h
@@ -9,6 +9,8 @@ void libertas_association_worker(struct work_struct *work);
 
 struct assoc_request * wlan_get_association_request(wlan_adapter *adapter);
 
+void libertas_sync_channel(struct work_struct *work);
+
 #define ASSOC_DELAY (HZ / 2)
 static inline void wlan_postpone_association_work(wlan_private *priv)
 {
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index ebedd63..0c3b9a5 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -987,6 +987,7 @@ int libertas_process_event(wlan_private * priv)
 			netif_carrier_on(priv->mesh_dev) ;
 		}
 		adapter->mode = IW_MODE_ADHOC ;
+		schedule_work(&priv->sync_channel);
 		break;
 
 	default:
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index d6c340a..785192b 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -150,6 +150,7 @@ struct _wlan_private {
 
 	struct delayed_work assoc_work;
 	struct workqueue_struct *assoc_thread;
+	struct work_struct sync_channel;
 
 	/** Hardware access */
 	int (*hw_register_dev) (wlan_private * priv);
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index cedf1db..7509cc1 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -310,8 +310,8 @@ enum cmd_mesh_access_opts {
 	cmd_act_mesh_get_ttl = 1,
 	cmd_act_mesh_set_ttl,
 	cmd_act_mesh_get_stats,
-	cmd_act_mesh_get_mpp,
-	cmd_act_mesh_set_mpp,
+	cmd_act_mesh_get_anycast,
+	cmd_act_mesh_set_anycast,
 };
 
 /** Card Event definition */
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index ec9be0c..623ab4b 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -178,45 +178,45 @@ u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
  */
 
 /**
- * @brief Get function for sysfs attribute libertas_mpp
+ * @brief Get function for sysfs attribute anycast_mask
  */
-static ssize_t libertas_mpp_get(struct device * dev,
+static ssize_t libertas_anycast_get(struct device * dev,
 		struct device_attribute *attr, char * buf) {
 	struct cmd_ds_mesh_access mesh_access;
 
 	memset(&mesh_access, 0, sizeof(mesh_access));
 	libertas_prepare_and_send_command(to_net_dev(dev)->priv,
 			cmd_mesh_access,
-			cmd_act_mesh_get_mpp,
+			cmd_act_mesh_get_anycast,
 			cmd_option_waitforrsp, 0, (void *)&mesh_access);
 
-	return snprintf(buf, 3, "%d\n", le32_to_cpu(mesh_access.data[0]));
+	return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0]));
 }
 
 /**
- * @brief Set function for sysfs attribute libertas_mpp
+ * @brief Set function for sysfs attribute anycast_mask
  */
-static ssize_t libertas_mpp_set(struct device * dev,
+static ssize_t libertas_anycast_set(struct device * dev,
 		struct device_attribute *attr, const char * buf, size_t count) {
 	struct cmd_ds_mesh_access mesh_access;
 	uint32_t datum;
 
 	memset(&mesh_access, 0, sizeof(mesh_access));
-	sscanf(buf, "%d", &datum);
+	sscanf(buf, "%x", &datum);
 	mesh_access.data[0] = cpu_to_le32(datum);
 
 	libertas_prepare_and_send_command((to_net_dev(dev))->priv,
 			cmd_mesh_access,
-			cmd_act_mesh_set_mpp,
+			cmd_act_mesh_set_anycast,
 			cmd_option_waitforrsp, 0, (void *)&mesh_access);
 	return strlen(buf);
 }
 
 /**
- * libertas_mpp attribute to be exported per mshX interface
- * through sysfs (/sys/class/net/mshX/libertas-mpp)
+ * anycast_mask attribute to be exported per mshX interface
+ * through sysfs (/sys/class/net/mshX/anycast_mask)
  */
-static DEVICE_ATTR(libertas_mpp, 0644, libertas_mpp_get, libertas_mpp_set );
+static DEVICE_ATTR(anycast_mask, 0644, libertas_anycast_get, libertas_anycast_set);
 
 /**
  *  @brief Check if the device can be open and wait if necessary.
@@ -847,6 +847,7 @@ int libertas_activate_card(wlan_private *priv, char *fw_name)
 	priv->assoc_thread =
 		create_singlethread_workqueue("libertas_assoc");
 	INIT_DELAYED_WORK(&priv->assoc_work, libertas_association_worker);
+	INIT_WORK(&priv->sync_channel, libertas_sync_channel);
 
 	/*
 	 * Register the device. Fillup the private data structure with
@@ -938,7 +939,7 @@ int libertas_add_mesh(wlan_private *priv, struct device *dev)
 		goto err_free;
 	}
 
-	ret = device_create_file(&(mesh_dev->dev), &dev_attr_libertas_mpp);
+	ret = device_create_file(&(mesh_dev->dev), &dev_attr_anycast_mask);
 	if (ret)
 		goto err_unregister;
 
@@ -1048,7 +1049,7 @@ void libertas_remove_mesh(wlan_private *priv)
 	netif_stop_queue(mesh_dev);
 	netif_carrier_off(priv->mesh_dev);
 
-	device_remove_file(&(mesh_dev->dev), &dev_attr_libertas_mpp);
+	device_remove_file(&(mesh_dev->dev), &dev_attr_anycast_mask);
 	unregister_netdev(mesh_dev);
 
 	priv->mesh_dev = NULL ;
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 5d70a76..88d9d2d 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -141,10 +141,9 @@ void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
 	lbs_deb_rx("skb->data %p\n", skb->data);
 
 	if (priv->mesh_dev && IS_MESH_FRAME(skb))
-		skb->dev = priv->mesh_dev;
+		skb->protocol = eth_type_trans(skb, priv->mesh_dev);
 	else
-		skb->dev = priv->dev;
-	skb->protocol = eth_type_trans(skb, priv->dev);
+		skb->protocol = eth_type_trans(skb, priv->dev);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	netif_rx(skb);
-- 
John W. Linville
linville@tuxdriver.com

Please pull 'libertas-upstream' branch of wireless-2.6

[John W. Linville]

[-- Attachment #1: Type: text/plain, Size: 3959 bytes --]

Patches identified by the libertas team as suitable for 2.6.23...

---

The following changes since commit 82fde74b94f11eee1e9c30e43fb162f80a5e63c0:
  Luis Carlos (1):
        libertas: convert libertas_mpp into anycast_mask

are found in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-upstream

Dan Williams (23):
      libertas: actually remove version.h
      libertas: kill wlan_scan_process_results
      libertas: kill ieeetypes_capinfo bitfield, use ieee80211.h types
      libertas: rename WLAN_802_11_KEY to enc_key and clean up usage
      libertas: clean up indentation in libertas_association_worker
      libertas: clean up 802.11 IE post-scan handling
      libertas: rename private ioctl constants and clean up ioctl handling
      libertas: remove if_bootcmd.c
      libertas: fix mixed-case abuse in cmd_ds_802_11_scan
      libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_result
      libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_start
      libertas: re-uppercase command defines and other constants
      libertas: fix debug build breakage due to field rename
      libertas: remove thread.h and make kthread usage clearer
      libertas: new mesh control knobs
      libertas: bump version to 322.p1
      libertas: wlan_ -> libertas_ rename in ioctl.c
      libertas: fix more mixed-case abuse
      libertas: move generic firmware reset command to common code
      libertas: wlan_ -> libertas_ function prefix renames for main.c
      libertas: simplify and clean up data rate handling
      libertas: fix MESH_[GET/SET]_BCASTR ioctl, clean up ioctl subcmd handling
      libertas: style fixes

Luis Carlos Cobo (1):
      libertas: specific mesh scan for mshX interface

 drivers/net/wireless/libertas/11d.c        |   22 +-
 drivers/net/wireless/libertas/Makefile     |    1 -
 drivers/net/wireless/libertas/README       |   65 ++++
 drivers/net/wireless/libertas/assoc.c      |   85 +++---
 drivers/net/wireless/libertas/cmd.c        |  338 ++++++++++----------
 drivers/net/wireless/libertas/cmdresp.c    |  172 +++++-----
 drivers/net/wireless/libertas/debugfs.c    |  130 ++++----
 drivers/net/wireless/libertas/decl.h       |    6 +-
 drivers/net/wireless/libertas/defs.h       |   66 ++---
 drivers/net/wireless/libertas/dev.h        |   34 +--
 drivers/net/wireless/libertas/ethtool.c    |    8 +-
 drivers/net/wireless/libertas/fw.c         |   43 ++--
 drivers/net/wireless/libertas/host.h       |  438 +++++++++++++-------------
 drivers/net/wireless/libertas/hostcmd.h    |   69 ++---
 drivers/net/wireless/libertas/if_bootcmd.c |   40 ---
 drivers/net/wireless/libertas/if_usb.c     |   58 ++--
 drivers/net/wireless/libertas/if_usb.h     |    1 -
 drivers/net/wireless/libertas/ioctl.c      |  478 +++++++++++++++-------------
 drivers/net/wireless/libertas/join.c       |  368 +++++++++++-----------
 drivers/net/wireless/libertas/join.h       |    2 +
 drivers/net/wireless/libertas/main.c       |  237 +++++++++------
 drivers/net/wireless/libertas/rx.c         |    9 +-
 drivers/net/wireless/libertas/scan.c       |  355 ++++++++-------------
 drivers/net/wireless/libertas/scan.h       |   10 +-
 drivers/net/wireless/libertas/thread.h     |   52 ---
 drivers/net/wireless/libertas/tx.c         |    2 +-
 drivers/net/wireless/libertas/types.h      |   65 +----
 drivers/net/wireless/libertas/version.h    |    1 -
 drivers/net/wireless/libertas/wext.c       |  428 ++++++++------------------
 drivers/net/wireless/libertas/wext.h       |   68 +++--
 30 files changed, 1684 insertions(+), 1967 deletions(-)
 delete mode 100644 drivers/net/wireless/libertas/if_bootcmd.c
 delete mode 100644 drivers/net/wireless/libertas/thread.h
 delete mode 100644 drivers/net/wireless/libertas/version.h

Omnibus patch attached as "libertas-upstream.diff.bz2" due to size concerns.
-- 
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org

[-- Attachment #2: libertas-upstream.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 40341 bytes --]

Please pull 'libertas' branch of wireless-2.6 (resent w/o attachment)

[John W. Linville]

Resending w/o the attached patch, in case it was too big...yikes!

Individual patches are available here:

	http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/libertas

John

---

Jeff,

This is the same as the previous pull request, only rebased on
2.6.22-rc4.  Since this is a big pull already, I didn't want to
complicate it with the additional patches identified by the libertas
team as 2.6.22-worthy.

John

---

The following changes since commit 5ecd3100e695228ac5e0ce0e325e252c0f11806f:
  Linus Torvalds (1):
        Linux 2.6.22-rc4

are found in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas

Chris Ball (1):
      libertas: wakeup both mesh and normal wakeup when getting out of scan

Dan Williams (25):
      libertas: call SET_NETDEV_DEV from common code
      libertas: replace 'macaddress' with 'bssid'
      libertas: correctly unregister mesh netdev on error
      libertas: don't tear down netdev in libertas_activate_card
      libertas: make scan result handling more flexible
      libertas: fix 'keep previous scan' behavior
      libertas: move channel changing into association framework
      libertas: make association paths consistent
      libertas: use MAC_FMT and MAC_ARG where appropriate
      libertas: use compare_ether_addr() rather than memcmp() where appropriate
      libertas: fix debug enter/leave prints for libertas_execute_next_command
      libertas: correctly balance locking in libertas_process_rx_command
      libertas: correct error report paths for wlan_fwt_list_ioctl
      libertas: fix deadlock SIOCGIWSCAN handler
      libertas: fix default adhoc channel
      libertas: honor specific channel requests during association
      libertas: send SIOCGIWSCAN event after partial scans too
      libertas: debug print spacing fixes in assoc.c
      libertas: add more verbose debugging to libertas_cmd_80211_authenticate
      libertas: Make WPA work through supplicant handshake
      libertas: sparse fixes
      libertas: tweak association debug output
      libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
      libertas: remove WPA_SUPPLICANT structure
      libertas: reduce SSID and BSSID mixed-case abuse

David Woodhouse (6):
      libertas: fix character set in README
      libertas: first pass at fixing up endianness issues
      libertas: More endianness fixes.
      libertas: more endianness fixes, in tx.c this time
      libertas: don't byte-swap firmware version number. It's a byte array.
      libertas: fix big-endian associate command.

Holger Schurig (23):
      libertas: rename wlan_association_worker
      libertas: a debug output was missing a newline
      libertas: fix removal of all debugfs files
      libertas: remove __FILE__ from debug output
      libertas: remove unused/superfluous definitions of DEV_NAME_LEN
      libertas: move vendor & product id's into if_usb.c
      libertas: make libertas_wlan_data_rates static
      libertas: exclude non-used code when PROC_DEBUG is not set
      libertas: make debug configurable
      libertas: tune debug code
      libertas: single out mesh code
      libertas: change debug output of libertas_interrupt()
      libertas: get rid of libertas_sbi_get_priv()
      libertas: fix SSID output
      libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to kzalloc()
      libertas: move reset_device() code main.c to if_usb.c
      libertas: split wlan_add_card()
      libertas: indirect all hardware access via hw_XXXX functions
      libertas: move contents of fw.h to decl.h
      libertas: split module into two (libertas.ko and usb8xxx.ko)
      libertas: fix RESET logic at unload time
      libertas: let DRV_NAME be overridable
      libertas: remove unused variables in wlan_dev_t

Javier Cardona (2):
      libertas: fixed transmission flow control on the mesh interface
      libertas: added transmission failures to mesh statistics

Luis Carlos Cobo (4):
      libertas: fixed incorrect assigment of fcs errors to frag errors
      libertas: add URB debug info
      libertas: fixed kernel oops on module/card removal
      libertas: updated mesh commands for 5.220.9.p11

Luis Carlos Cobo Rus (6):
      libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
      libertas: cleanup of fwt_list_route processing
      libertas: updated readme file
      libertas: make mac address configuration work with mesh interface too
      libertas: split wext for eth and msh
      libertas: support for mesh autostart on firmware 5.220.11

Marcelo Tosatti (5):
      libertas: scan two channels per scan command
      libertas: remove deprecated pm_register and associated code
      libertas: fix scanning from associate path
      libertas: fix error handling of card initialization
      libertas: fix oops on rmmod

 drivers/net/wireless/Kconfig               |   19 +-
 drivers/net/wireless/libertas/11d.c        |  152 ++--
 drivers/net/wireless/libertas/11d.h        |    6 +-
 drivers/net/wireless/libertas/Makefile     |    4 +-
 drivers/net/wireless/libertas/README       |   52 +-
 drivers/net/wireless/libertas/assoc.c      |  345 +++++---
 drivers/net/wireless/libertas/assoc.h      |    8 +-
 drivers/net/wireless/libertas/cmd.c        |  559 +++++------
 drivers/net/wireless/libertas/cmdresp.c    |  375 ++++----
 drivers/net/wireless/libertas/debugfs.c    |  432 ++++----
 drivers/net/wireless/libertas/decl.h       |   20 +-
 drivers/net/wireless/libertas/defs.h       |  101 ++-
 drivers/net/wireless/libertas/dev.h        |   98 +-
 drivers/net/wireless/libertas/ethtool.c    |   55 +-
 drivers/net/wireless/libertas/fw.c         |  111 +--
 drivers/net/wireless/libertas/fw.h         |   13 -
 drivers/net/wireless/libertas/host.h       |   13 +-
 drivers/net/wireless/libertas/hostcmd.h    |  392 ++++----
 drivers/net/wireless/libertas/if_bootcmd.c |    6 +-
 drivers/net/wireless/libertas/if_usb.c     |  448 +++++----
 drivers/net/wireless/libertas/if_usb.h     |   32 +-
 drivers/net/wireless/libertas/ioctl.c      |  286 ++++--
 drivers/net/wireless/libertas/join.c       |  464 ++++-----
 drivers/net/wireless/libertas/join.h       |   13 +-
 drivers/net/wireless/libertas/main.c       |  673 ++++++-------
 drivers/net/wireless/libertas/rx.c         |   63 +-
 drivers/net/wireless/libertas/sbi.h        |   40 -
 drivers/net/wireless/libertas/scan.c       | 1529 +++++++++++++---------------
 drivers/net/wireless/libertas/scan.h       |   81 +-
 drivers/net/wireless/libertas/thread.h     |    8 +-
 drivers/net/wireless/libertas/tx.c         |   74 +-
 drivers/net/wireless/libertas/types.h      |   63 +-
 drivers/net/wireless/libertas/wext.c       |  778 ++++++++-------
 drivers/net/wireless/libertas/wext.h       |   13 +-
 34 files changed, 3679 insertions(+), 3647 deletions(-)
 delete mode 100644 drivers/net/wireless/libertas/fw.h
 delete mode 100644 drivers/net/wireless/libertas/sbi.h

-- 
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org

Re: Please pull 'libertas-fixes' branch of wireless-2.6

[Jeff Garzik]

John W. Linville wrote:
> Fixes identified by the libertas team as important for 2.6.22...
> 
> ---
> 
> The following changes since commit 717c9339202a42ae7bec7d3c4b84deecdcae9f81:
>   Dan Williams (1):
>         libertas: reduce SSID and BSSID mixed-case abuse
> 
> are found in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-fixes
> 
> Dan Williams (1):
>       libertas: actually send mesh frames to mesh netdev
> 
> Luis Carlos (1):
>       libertas: convert libertas_mpp into anycast_mask
> 
> Luis Carlos Cobo Rus (2):
>       libertas: pull current channel from firmware on mesh autostart
>       libertas: deauthenticate from AP in channel switch

Just to be clear, you intend 'libertas' and 'libertas-fixes' (in that 
order) for 2.6.22, and 'libertas-upstream' for 2.6.23?

	Jeff

Re: Please pull 'libertas-fixes' branch of wireless-2.6

[John W. Linville]

On Tue, Jun 12, 2007 at 06:54:35PM -0400, Jeff Garzik wrote:
> John W. Linville wrote:
> >Fixes identified by the libertas team as important for 2.6.22...
> >
> >---
> >
> >The following changes since commit 
> >717c9339202a42ae7bec7d3c4b84deecdcae9f81:
> >  Dan Williams (1):
> >        libertas: reduce SSID and BSSID mixed-case abuse
> >
> >are found in the git repository at:
> >
> >  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git 
> >  libertas-fixes
> >
> >Dan Williams (1):
> >      libertas: actually send mesh frames to mesh netdev
> >
> >Luis Carlos (1):
> >      libertas: convert libertas_mpp into anycast_mask
> >
> >Luis Carlos Cobo Rus (2):
> >      libertas: pull current channel from firmware on mesh autostart
> >      libertas: deauthenticate from AP in channel switch
> 
> Just to be clear, you intend 'libertas' and 'libertas-fixes' (in that 
> order) for 2.6.22, and 'libertas-upstream' for 2.6.23?

Yes, correct.

Thanks,

John
-- 
John W. Linville
linville@tuxdriver.com

Re: Please pull 'libertas-fixes' branch of wireless-2.6

[Jeff Garzik]

John W. Linville wrote:
> Fixes identified by the libertas team as important for 2.6.22...
> 
> ---
> 
> The following changes since commit 717c9339202a42ae7bec7d3c4b84deecdcae9f81:
>   Dan Williams (1):
>         libertas: reduce SSID and BSSID mixed-case abuse
> 
> are found in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-fixes
> 
> Dan Williams (1):
>       libertas: actually send mesh frames to mesh netdev
> 
> Luis Carlos (1):
>       libertas: convert libertas_mpp into anycast_mask
> 
> Luis Carlos Cobo Rus (2):
>       libertas: pull current channel from firmware on mesh autostart
>       libertas: deauthenticate from AP in channel switch
> 
>  drivers/net/wireless/libertas/assoc.c   |   13 +++++++++++++
>  drivers/net/wireless/libertas/assoc.h   |    2 ++
>  drivers/net/wireless/libertas/cmdresp.c |    1 +
>  drivers/net/wireless/libertas/dev.h     |    1 +
>  drivers/net/wireless/libertas/host.h    |    4 ++--
>  drivers/net/wireless/libertas/main.c    |   27 ++++++++++++++-------------
>  drivers/net/wireless/libertas/rx.c      |    5 ++---
>  7 files changed, 35 insertions(+), 18 deletions(-)

pulled into #upstream-fixes

Re: Please pull 'libertas' branch of wireless-2.6 (resent w/o attachment)

[Jeff Garzik]

John W. Linville wrote:
> Resending w/o the attached patch, in case it was too big...yikes!
> 
> Individual patches are available here:
> 
> 	http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/libertas
> 
> John
> 
> ---
> 
> Jeff,
> 
> This is the same as the previous pull request, only rebased on
> 2.6.22-rc4.  Since this is a big pull already, I didn't want to
> complicate it with the additional patches identified by the libertas
> team as 2.6.22-worthy.
> 
> John
> 
> ---
> 
> The following changes since commit 5ecd3100e695228ac5e0ce0e325e252c0f11806f:
>   Linus Torvalds (1):
>         Linux 2.6.22-rc4
> 
> are found in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas
> 
> Chris Ball (1):
>       libertas: wakeup both mesh and normal wakeup when getting out of scan
> 
> Dan Williams (25):
>       libertas: call SET_NETDEV_DEV from common code
>       libertas: replace 'macaddress' with 'bssid'
>       libertas: correctly unregister mesh netdev on error
>       libertas: don't tear down netdev in libertas_activate_card
>       libertas: make scan result handling more flexible
>       libertas: fix 'keep previous scan' behavior
>       libertas: move channel changing into association framework
>       libertas: make association paths consistent
>       libertas: use MAC_FMT and MAC_ARG where appropriate
>       libertas: use compare_ether_addr() rather than memcmp() where appropriate
>       libertas: fix debug enter/leave prints for libertas_execute_next_command
>       libertas: correctly balance locking in libertas_process_rx_command
>       libertas: correct error report paths for wlan_fwt_list_ioctl
>       libertas: fix deadlock SIOCGIWSCAN handler
>       libertas: fix default adhoc channel
>       libertas: honor specific channel requests during association
>       libertas: send SIOCGIWSCAN event after partial scans too
>       libertas: debug print spacing fixes in assoc.c
>       libertas: add more verbose debugging to libertas_cmd_80211_authenticate
>       libertas: Make WPA work through supplicant handshake
>       libertas: sparse fixes
>       libertas: tweak association debug output
>       libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
>       libertas: remove WPA_SUPPLICANT structure
>       libertas: reduce SSID and BSSID mixed-case abuse
> 
> David Woodhouse (6):
>       libertas: fix character set in README
>       libertas: first pass at fixing up endianness issues
>       libertas: More endianness fixes.
>       libertas: more endianness fixes, in tx.c this time
>       libertas: don't byte-swap firmware version number. It's a byte array.
>       libertas: fix big-endian associate command.
> 
> Holger Schurig (23):
>       libertas: rename wlan_association_worker
>       libertas: a debug output was missing a newline
>       libertas: fix removal of all debugfs files
>       libertas: remove __FILE__ from debug output
>       libertas: remove unused/superfluous definitions of DEV_NAME_LEN
>       libertas: move vendor & product id's into if_usb.c
>       libertas: make libertas_wlan_data_rates static
>       libertas: exclude non-used code when PROC_DEBUG is not set
>       libertas: make debug configurable
>       libertas: tune debug code
>       libertas: single out mesh code
>       libertas: change debug output of libertas_interrupt()
>       libertas: get rid of libertas_sbi_get_priv()
>       libertas: fix SSID output
>       libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to kzalloc()
>       libertas: move reset_device() code main.c to if_usb.c
>       libertas: split wlan_add_card()
>       libertas: indirect all hardware access via hw_XXXX functions
>       libertas: move contents of fw.h to decl.h
>       libertas: split module into two (libertas.ko and usb8xxx.ko)
>       libertas: fix RESET logic at unload time
>       libertas: let DRV_NAME be overridable
>       libertas: remove unused variables in wlan_dev_t
> 
> Javier Cardona (2):
>       libertas: fixed transmission flow control on the mesh interface
>       libertas: added transmission failures to mesh statistics
> 
> Luis Carlos Cobo (4):
>       libertas: fixed incorrect assigment of fcs errors to frag errors
>       libertas: add URB debug info
>       libertas: fixed kernel oops on module/card removal
>       libertas: updated mesh commands for 5.220.9.p11
> 
> Luis Carlos Cobo Rus (6):
>       libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
>       libertas: cleanup of fwt_list_route processing
>       libertas: updated readme file
>       libertas: make mac address configuration work with mesh interface too
>       libertas: split wext for eth and msh
>       libertas: support for mesh autostart on firmware 5.220.11
> 
> Marcelo Tosatti (5):
>       libertas: scan two channels per scan command
>       libertas: remove deprecated pm_register and associated code
>       libertas: fix scanning from associate path
>       libertas: fix error handling of card initialization
>       libertas: fix oops on rmmod
> 
>  drivers/net/wireless/Kconfig               |   19 +-
>  drivers/net/wireless/libertas/11d.c        |  152 ++--
>  drivers/net/wireless/libertas/11d.h        |    6 +-
>  drivers/net/wireless/libertas/Makefile     |    4 +-
>  drivers/net/wireless/libertas/README       |   52 +-
>  drivers/net/wireless/libertas/assoc.c      |  345 +++++---
>  drivers/net/wireless/libertas/assoc.h      |    8 +-
>  drivers/net/wireless/libertas/cmd.c        |  559 +++++------
>  drivers/net/wireless/libertas/cmdresp.c    |  375 ++++----
>  drivers/net/wireless/libertas/debugfs.c    |  432 ++++----
>  drivers/net/wireless/libertas/decl.h       |   20 +-
>  drivers/net/wireless/libertas/defs.h       |  101 ++-
>  drivers/net/wireless/libertas/dev.h        |   98 +-
>  drivers/net/wireless/libertas/ethtool.c    |   55 +-
>  drivers/net/wireless/libertas/fw.c         |  111 +--
>  drivers/net/wireless/libertas/fw.h         |   13 -
>  drivers/net/wireless/libertas/host.h       |   13 +-
>  drivers/net/wireless/libertas/hostcmd.h    |  392 ++++----
>  drivers/net/wireless/libertas/if_bootcmd.c |    6 +-
>  drivers/net/wireless/libertas/if_usb.c     |  448 +++++----
>  drivers/net/wireless/libertas/if_usb.h     |   32 +-
>  drivers/net/wireless/libertas/ioctl.c      |  286 ++++--
>  drivers/net/wireless/libertas/join.c       |  464 ++++-----
>  drivers/net/wireless/libertas/join.h       |   13 +-
>  drivers/net/wireless/libertas/main.c       |  673 ++++++-------
>  drivers/net/wireless/libertas/rx.c         |   63 +-
>  drivers/net/wireless/libertas/sbi.h        |   40 -
>  drivers/net/wireless/libertas/scan.c       | 1529 +++++++++++++---------------
>  drivers/net/wireless/libertas/scan.h       |   81 +-
>  drivers/net/wireless/libertas/thread.h     |    8 +-
>  drivers/net/wireless/libertas/tx.c         |   74 +-
>  drivers/net/wireless/libertas/types.h      |   63 +-
>  drivers/net/wireless/libertas/wext.c       |  778 ++++++++-------
>  drivers/net/wireless/libertas/wext.h       |   13 +-
>  34 files changed, 3679 insertions(+), 3647 deletions(-)
>  delete mode 100644 drivers/net/wireless/libertas/fw.h
>  delete mode 100644 drivers/net/wireless/libertas/sbi.h

pulled into #upstream-fixes

Re: Please pull 'libertas-upstream' branch of wireless-2.6

[Jeff Garzik]

John W. Linville wrote:
> Patches identified by the libertas team as suitable for 2.6.23...
> 
> ---
> 
> The following changes since commit 82fde74b94f11eee1e9c30e43fb162f80a5e63c0:
>   Luis Carlos (1):
>         libertas: convert libertas_mpp into anycast_mask
> 
> are found in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-upstream

since it sounds like some additional 2.6.22 (warning?) fixes will be 
coming, I'm going to hold off pulling this.  I would rather the wireless 
maintainer sort out the merging in this case :)  Once 2.6.22 is all 
upstream, please do resend this push...