From: Jay Vosburgh <jay.vosburgh@canonical.com>
To: Karl Heiss <kheiss@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <gospo@cumulusnetworks.com>,
netdev@vger.kernel.org
Subject: Re: [PATCH net] bonding: Prevent IPv6 link local address on enslaved devices
Date: Fri, 08 Jan 2016 11:56:01 -0800 [thread overview]
Message-ID: <4679.1452282961@famine> (raw)
In-Reply-To: <1452281616-14447-1-git-send-email-kheiss@gmail.com>
Karl Heiss <kheiss@gmail.com> wrote:
>Upstream commit 1f718f0f4f97 ("bonding: populate neighbour's private on
>enslave") undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no
>addrconf for slaves separately from master") by effectively setting
>the slave flag after the slave has been opened. If the slave comes up quickly
>enough, it will go through the IPv6 addrconf before the slave flag has been
>set and will get a link local IPv6 address.
>
>Set IFF_SLAVE before dev_open() and clear it after dev_close() to ensure that
>addrconf knows to ignore on state change.
I think prepending "During bonding enslavement and removal
processing," (or the equivalent) makes the above sentence a bit clearer
as to what's going on.
>Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave")
>
>Signed-off-by: Karl Heiss <kheiss@gmail.com>
>---
> drivers/net/bonding/bond_main.c | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 9e0f8a7..200358e 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -1207,7 +1207,6 @@ static int bond_master_upper_dev_link(struct net_device *bond_dev,
> err = netdev_master_upper_dev_link_private(slave_dev, bond_dev, slave);
> if (err)
> return err;
>- slave_dev->flags |= IFF_SLAVE;
> rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE, GFP_KERNEL);
> return 0;
> }
>@@ -1216,7 +1215,6 @@ static void bond_upper_dev_unlink(struct net_device *bond_dev,
> struct net_device *slave_dev)
> {
> netdev_upper_dev_unlink(slave_dev, bond_dev);
>- slave_dev->flags &= ~IFF_SLAVE;
> rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE, GFP_KERNEL);
> }
Will this change cause issues for user space monitoring of the
RTM_NEWLINKs, as now the message will have IFF_SLAVE in the flags for
both the "link" and "unlink" cases? How would link be distinguished
from unlink?
Since the unlink happens only in __bond_release_one or in the
case of a failure within bond_enslave, does clearing the flag in
bond_upper_dev_unlink cause any actual issues?
-J
>@@ -1465,6 +1463,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
> }
> }
>
>+ /* set slave flag before open to prevent IPv6 addrconf */
>+ slave_dev->flags |= IFF_SLAVE;
>+
> /* open the slave since the application closed it */
> res = dev_open(slave_dev);
> if (res) {
>@@ -1725,6 +1726,7 @@ err_close:
> dev_close(slave_dev);
>
> err_restore_mac:
>+ slave_dev->flags &= ~IFF_SLAVE;
> if (!bond->params.fail_over_mac ||
> BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
> /* XXX TODO - fom follow mode needs to change master's
>@@ -1906,6 +1908,8 @@ static int __bond_release_one(struct net_device *bond_dev,
> /* close slave before restoring its mac address */
> dev_close(slave_dev);
>
>+ slave_dev->flags &= ~IFF_SLAVE;
>+
> if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
> BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
> /* restore original ("permanent") mac address */
>--
>1.7.1
>
---
-Jay Vosburgh, jay.vosburgh@canonical.com
next prev parent reply other threads:[~2016-01-08 19:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-08 19:33 [PATCH net] bonding: Prevent IPv6 link local address on enslaved devices Karl Heiss
2016-01-08 19:56 ` Jay Vosburgh [this message]
2016-01-08 20:34 ` Karl Heiss
2016-01-08 20:51 ` Jay Vosburgh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4679.1452282961@famine \
--to=jay.vosburgh@canonical.com \
--cc=gospo@cumulusnetworks.com \
--cc=kheiss@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vfalico@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).