netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: Jason Lunz <lunz@reflexsecurity.com>
Cc: Mark McLoughlin <markmc@redhat.com>,
	e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org,
	Jeff Garzik <jeff@garzik.org>
Subject: Re: e1000: backport ich9 support from 7.5.5 ?
Date: Fri, 29 Jun 2007 12:51:02 -0700	[thread overview]
Message-ID: <468562A6.8060901@intel.com> (raw)
In-Reply-To: <20070629175006.GB3917@falooley.org>

Jason Lunz wrote:
> On Fri, Jun 29, 2007 at 06:29:18PM +0100, Mark McLoughlin wrote:
>> 	I understand there is some delay in getting e1000-7.5.5 into the
>> upstream kernel given the major re-working of the chipset specific
>> parts.
>>
>> 	I wonder would it be feasible in the meantime to backport the ich9
>> support and push it upstream?
> 
> seconded - this driver reorg has been holding back support for the
> newest e1000 hardware since at least 2.6.20, and I haven't seen any
> indication that the 7.5.5 e1000 driver will even be added to 2.6.23.

I disagree, we should not break the current e1000 driver in the kernel while 
there is a new driver coming up that introduces ich9 support without breaking 
(the old e1000) support for all other devices. This is why we want to drop a new 
version of the e1000 driver upstream instead, and put all newer devices in that 
driver.

For distro's not following kernel.org releases we have the perfect solution: A 
fully tested 7.5.5 driver on sourceforge that was extensively tested against 
RHEL5 for instance, but also a lot of other older kernels.

> What's the prognosis for the 7.5.5-series e1000 reorg going into
> netdev-2.6?

I sure hope to get it out before 2.6.23 merge window close... But anything can 
unfortunately happen.


Auke


  reply	other threads:[~2007-06-29 19:51 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-29 17:29 e1000: backport ich9 support from 7.5.5 ? Mark McLoughlin
2007-06-29 17:50 ` Jason Lunz
2007-06-29 19:51   ` Kok, Auke [this message]
2007-06-29 20:22     ` Jason Lunz
2007-06-29 20:59     ` Jeff Garzik
2007-06-30 21:24     ` Mark McLoughlin
2007-07-02 23:52       ` Williams, Mitch A
2007-07-03  0:10         ` Rick Jones
2007-07-03  0:55           ` Jason Lunz
2007-07-03  1:44             ` Kok, Auke
2007-07-03  7:15         ` Christoph Hellwig
2007-07-03 13:13           ` [E1000-devel] " Jeff Garzik
2007-06-29 20:55   ` Jeff Garzik
2007-06-29 21:39     ` Kok, Auke
2007-06-29 22:03       ` Andrew Morton
2007-06-29 22:11         ` Jeff Garzik
2007-06-29 23:24           ` RFR: New e1000 driver (e1000new), was: " Kok, Auke
2007-06-29 23:38             ` Arjan van de Ven
2007-07-08 18:20               ` Jeff Garzik
2007-07-08 20:14                 ` Arjan van de Ven
2007-07-08 22:01                   ` [E1000-devel] " Jonathan Lundell
2007-06-30  3:32             ` Roland Dreier
2007-07-08 18:20               ` Jeff Garzik
2007-07-06 19:07             ` Jeff Garzik
2007-07-07  0:13               ` Kok, Auke
2007-07-07 12:23                 ` James Chapman
2007-07-08 18:41                   ` James Chapman
2007-07-07 18:59               ` Andrew Grover
2007-06-29 23:57           ` Andrew Grover
2007-06-30  0:02             ` Andrew Grover
2007-06-30  0:09             ` Jeff Garzik
2007-06-30  1:29               ` Jim McCullough
2007-06-30  1:31                 ` Jim McCullough
2007-06-30  2:34                 ` [E1000-devel] " Kok, Auke
2007-06-30  2:31               ` Kok, Auke
2007-06-30  8:25                 ` Christoph Hellwig
2007-07-03 22:48                   ` Splitting e1000 (Was: Re: e1000: backport ich9 support from 7.5.5 ?) Kok, Auke
2007-07-05 18:32                     ` Kok, Auke
2007-07-06  0:22                     ` Jeff Garzik
2007-07-07  0:14                       ` Kok, Auke
2007-07-07 13:58                         ` James Chapman
2007-07-07 19:04                         ` Francois Romieu
2007-07-07 21:54                           ` Kok, Auke
2007-07-08  1:32                             ` Stephen Hemminger
2007-07-08 10:07                               ` James Chapman
2007-07-08 16:29                               ` Arjan van de Ven
2007-07-08 18:06                                 ` Jeff Garzik
2007-07-08 19:24                                   ` Andrew Grover
2007-07-09 17:56                                     ` Jeff Garzik
2007-07-08 20:05                                   ` Arjan van de Ven
2007-07-09 18:39                                     ` Jeff Garzik
2007-07-09 18:46                                       ` Stephen Hemminger
2007-07-09 19:36                                       ` Arjan van de Ven
2007-07-09 20:46                                       ` Kok, Auke
2007-07-09 22:26                                         ` Jeff Garzik
2007-07-13 21:45                                           ` Kok, Auke
2007-07-13 22:08                                             ` Jeff Garzik
2007-07-13 22:13                                               ` Kok, Auke
2007-07-08 18:08                               ` Jeff Garzik
2007-07-08 17:41                         ` Jeff Garzik
2007-06-30 14:31                 ` e1000: backport ich9 support from 7.5.5 ? James Chapman
2007-06-30 16:29                   ` Kok, Auke
2007-07-01 10:45                     ` James Chapman
2007-06-30  8:26             ` Christoph Hellwig
2007-06-29 22:16         ` Kok, Auke
2007-06-29 22:07       ` Jeff Garzik
2007-06-29 21:39   ` Andy Gospodarek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=468562A6.8060901@intel.com \
    --to=auke-jan.h.kok@intel.com \
    --cc=e1000-devel@lists.sourceforge.net \
    --cc=jeff@garzik.org \
    --cc=lunz@reflexsecurity.com \
    --cc=markmc@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).