From: Ben Greear <greearb@candelatech.com>
To: NetDev <netdev@vger.kernel.org>
Subject: Does the Netxen driver work?
Date: Fri, 06 Jul 2007 12:05:49 -0700 [thread overview]
Message-ID: <468E928D.20606@candelatech.com> (raw)
Hello!
I just got some Netxen 10Gbe CX4 adapters and put them into freshly
updated Fedora 7 64-bit systems. So far, I am not having much luck.
Kernel is: Official F7 2.6.21-1.3228.fc7
NIC:
01:00.0 Ethernet controller: NetXen Incorporated NXB-10GCX4 10 Gigabit Ethernet PCIe Adapter with CX4 copper interface (rev 25)
The motherboard chipset is Intel based (I can provide more info is someone
cares..but I first wanted to make sure there are no well-known issues.)
Interesting boot messages:
Jul 5 16:15:17 a440-dc kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 5 16:15:17 a440-dc kernel: netxen-nic: unable to allocate MSI interrupt error
Jul 5 16:15:17 a440-dc kernel: netxen-nic: XGbE board initialized
Is that MSI error fatal?
The two NICs are connected by a CX4 cable, and from dmesg output, it appears
they have negotiated link properly.
However, I see tx counters incrementing on both sides, but no rx counters.
I will try the latest 22-pre kernel in the meantime, but if anyone has
any experience getting these NICs to work, I'm interested to know about it.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next reply other threads:[~2007-07-06 19:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-06 19:05 Ben Greear [this message]
2007-07-06 19:21 ` Does the Netxen driver work? Ben Greear
2007-07-09 17:31 ` Chuck Ebbert
2007-07-10 4:33 ` Dhananjay Phadke
2007-07-10 16:01 ` Chuck Ebbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468E928D.20606@candelatech.com \
--to=greearb@candelatech.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).