RealTek 8169 support question

[Chuck Lever <chuck.lever@oracle.com>]

[-- Attachment #1: Type: text/plain, Size: 1310 bytes --]

Hello Francois-

I just bought a new Jetway mainboard with a pair of RTL 8169 NICs. 
After installing Fedora 7, and upgrading to 2.6.22.1-41.fc7, I still 
can't get either of the NICs to recognize a link beat from my switch.

lspci -v output:

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
         Subsystem: Jetway Information Co., Ltd. Unknown device 10ec
         Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
         I/O ports at ee00 [size=256]
         Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
         [virtual] Expansion ROM at 10020000 [disabled] [size=64K]
         Capabilities: [dc] Power Management version 2

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
         Subsystem: Jetway Information Co., Ltd. Unknown device 10ec
         Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
         I/O ports at f000 [size=256]
         Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
         [virtual] Expansion ROM at 10030000 [disabled] [size=64K]
         Capabilities: [dc] Power Management version 2

I assume "Unknown device" indicates that the driver doesn't recognize 
the model string?

Thanks in advance for any advice.

[-- Attachment #2: chuck.lever.vcf --]
[-- Type: text/x-vcard, Size: 290 bytes --]

begin:vcard
fn:Chuck Lever
n:Lever;Chuck
org:Oracle Corporation;Corporate Architecture: Linux Projects Group
adr:;;1015 Granger Avenue;Ann Arbor;MI;48104;USA
title:Principal Member of Staff
tel;work:+1 248 614 5091
x-mozilla-html:FALSE
url:http://oss.oracle.com/~cel
version:2.1
end:vcard