From: Jarek Poplawski <jarkao2@o2.pl>
To: hadi@cyberus.ca
Cc: Radu Rendec <radu.rendec@ines.ro>, netdev@vger.kernel.org
Subject: Re: Endianness problem with u32 classifier hash masks
Date: Sun, 04 Nov 2007 00:39:30 +0100 [thread overview]
Message-ID: <472D06B2.9040402@o2.pl> (raw)
In-Reply-To: <1194045830.4438.21.camel@localhost>
jamal wrote, On 11/03/2007 12:23 AM:
> On Fri, 2007-02-11 at 18:31 +0100, Jarek Poplawski wrote:
>> Radu Rendec wrote:
>>
>>> Hi,
>>>
>>> While trying to implement u32 hashes in my shaping machine I ran into a
>>> possible bug in the u32 hash/bucket computing algorithm
>>> (net/sched/cls_u32.c).
>>>
>>> The problem occurs only with hash masks that extend over the octet
>>> boundary, on little endian machines (where htonl() actually does
>>> something).
>>>
>>> I'm not 100% sure this is a problem with u32 itself, but at least I'm
>>> sure u32 with the same configuration would behave differently on little
>>> endian and big endian machines. Detailed description of the problem and
>>> proposed patch follow.
>>
>> I think you are right about this different behavior, so it looks like a bug.
>> And since little endian way is uncontrollable in such a case, your proposal
>> should be right.
>>
>> But, since there is a maintainer for this, let's check what is he not payed
>> for?! (Cc: Jamal Hadi Salim)
>>
>
> Thanks for the CC Jarek - and i promise to share the loot with you when
> i lay my hands on it;->
>
> I see that given the mask described (the 0 bits bounding the two
> nibbles), the same packet in that network will hit two different buckets
> depending on endianness. In other words there is lack of consistency. So
> good catch.
> The patch would certainly resolve it.
> The only thing that bothers me with the patch approach is the extra
> conversion in the fast path. Radu, since this is not a show stopper -
> can you give me a short time to sip on it? I am thinking it is probably
> resolvable by using the right tuning at config time - one knob that
> looks usable is fshift and that all this can be done at config time; but
> i may need more than one coffee to get it right, but if you see it just
> send a patch. I will try to use the data you used to see if i am making
> any sense.
>
> cheers,
> jamal
>
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
static __inline__ unsigned u32_hash_fold(u32 key, struct tc_u32_sel *sel, u8 fshift)
{
#ifdef __LITTLE_ENDIAN
/*
* It's a hack/optimization to avoid ntohl(). Since
* it's only used in u32_classify(), and masked with
* divisor (1 byte), one, least signinificant byte
* of selection is enough.
*/
fshift = 32 - 8 - fshift;
#endif
unsigned h = (key & sel->hmask) >> fshift;
return h;
}
> --- linux-2.6.22.9/net/sched/cls_u32.c.orig 2007-10-30 17:08:03.000000000 +0200
> +++ linux-2.6.22.9/net/sched/cls_u32.c 2007-10-30 17:04:49.000000000 +0200
> @@ -198,7 +198,7 @@
> ht = n->ht_down;
> sel = 0;
> if (ht->divisor)
> - sel = ht->divisor&u32_hash_fold(*(u32*)(ptr+n->sel.hoff), &n->sel,n->fshift);
> + sel = ht->divisor&u32_hash_fold(ntohl(*(u32*)(ptr+n->sel.hoff)), &n->sel,n->fshift);
>
> if (!(n->sel.flags&(TC_U32_VAROFFSET|TC_U32_OFFSET|TC_U32_EAT)))
> goto next_ht;
> @@ -626,6 +626,10 @@
> }
> #endif
>
> + /* userspace tc tool sends us the hmask in network order, but we
> + * need host order, so change it here */
> + s->hmask = ntohl(s->hmask);
> +
> memcpy(&n->sel, s, sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key));
> n->ht_up = ht;
> n->handle = handle;
> @@ -735,9 +739,14 @@
> u32 divisor = ht->divisor+1;
> RTA_PUT(skb, TCA_U32_DIVISOR, 4, &divisor);
> } else {
> + /* get the address where the selector will be put, then
> + * change the hmask after it is put there */
> + struct tc_u32_sel *s =
> + (struct tc_u32_sel *)RTA_DATA(skb_tail_pointer(skb));
> RTA_PUT(skb, TCA_U32_SEL,
> sizeof(n->sel) + n->sel.nkeys*sizeof(struct tc_u32_key),
> &n->sel);
> + s->hmask = htonl(s->hmask);
> if (n->ht_up) {
> u32 htid = n->handle & 0xFFFFF000;
> RTA_PUT(skb, TCA_U32_HASH, 4, &htid);
>
>
> -
next prev parent reply other threads:[~2007-11-03 23:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-01 17:55 Endianness problem with u32 classifier hash masks Radu Rendec
2007-11-02 17:31 ` Jarek Poplawski
2007-11-02 23:23 ` jamal
2007-11-03 23:39 ` Jarek Poplawski [this message]
2007-11-03 23:58 ` Jarek Poplawski
2007-11-04 0:30 ` Jarek Poplawski
2007-11-04 1:17 ` Jarek Poplawski
2007-11-04 23:58 ` jamal
2007-11-05 9:12 ` Jarek Poplawski
2007-11-05 12:59 ` Radu Rendec
2007-11-05 13:43 ` jamal
2007-11-05 14:49 ` Jarek Poplawski
2007-11-05 16:12 ` Radu Rendec
2007-11-05 13:52 ` Jarek Poplawski
2007-11-05 14:06 ` jamal
2007-11-05 17:31 ` Radu Rendec
2007-11-05 21:06 ` Jarek Poplawski
2007-11-05 21:28 ` Jarek Poplawski
2007-11-05 22:27 ` jamal
2007-11-06 0:02 ` Jarek Poplawski
2007-11-06 0:12 ` Jarek Poplawski
2007-11-06 8:09 ` Radu Rendec
2007-11-06 13:34 ` jamal
2007-11-06 14:25 ` Jarek Poplawski
2007-11-06 14:43 ` jamal
2007-11-06 17:00 ` Radu Rendec
2007-11-06 20:28 ` Jarek Poplawski
2007-11-07 9:22 ` David Miller
2007-11-07 12:56 ` Jarek Poplawski
2007-11-07 13:42 ` jamal
2007-11-07 13:55 ` Radu Rendec
2007-11-07 14:35 ` Radu Rendec
2007-11-08 11:07 ` [PATCH] [PKT_SCHED] CLS_U32: Use ffs() instead of C code on hash mask to get first set bit Radu Rendec
2007-11-08 11:37 ` Jarek Poplawski
2007-11-08 13:45 ` jamal
2007-11-11 5:55 ` David Miller
2007-11-05 13:47 ` Endianness problem with u32 classifier hash masks jamal
2007-11-05 14:35 ` Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=472D06B2.9040402@o2.pl \
--to=jarkao2@o2.pl \
--cc=hadi@cyberus.ca \
--cc=netdev@vger.kernel.org \
--cc=radu.rendec@ines.ro \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).