From: osprey67 <osprey67@yahoo.com>
To: netdev@vger.kernel.org
Cc: osprey67 <osprey67@yahoo.com>
Subject: [PATCH 01/01] iproute2-2.6.23: RFC4214 Support (3)
Date: Fri, 09 Nov 2007 16:42:53 -0800 [thread overview]
Message-ID: <4734FE8D.5070107@yahoo.com> (raw)
In-Reply-To: <4734FCEF.3080301@yahoo.com>
[-- Attachment #1: Type: text/plain, Size: 4831 bytes --]
From: Fred L. Templin <fred.l.templin@boeing.com>
This is experimental support for the Intra-Site Automatic
Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses
the SIT module, and is configured using the unmodified
"ip" utility with device names beginning with: "isatap".
The following diffs are specific to the iproute2-2.6.23
software distribution. The diff text file itself is also
attached and should be suitable for use with the patch
utility.
Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com>
---
--- iproute2-2.6.23/ip/iptunnel.c.orig 2007-11-08 16:27:24.000000000 -0800
+++ iproute2-2.6.23/ip/iptunnel.c 2007-11-09 15:47:06.000000000 -0800
@@ -1,3 +1,5 @@
+#define ISATAP
+
/*
* iptunnel.c "ip tunnel"
*
@@ -39,7 +41,12 @@ static void usage(void) __attribute__((n
static void usage(void)
{
fprintf(stderr, "Usage: ip tunnel { add | change | del | show } [ NAME ]\n");
+#if defined(ISATAP)
+ fprintf(stderr, " [ mode { ipip | gre | sit | isatap } ]\n");
+ fprintf(stderr, " [ remote ADDR ] [ local ADDR ] [ router ADDR ] [ lifetime NUMBER ]\n");
+#else
fprintf(stderr, " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n");
+#endif
fprintf(stderr, " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n");
fprintf(stderr, " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n");
fprintf(stderr, "\n");
@@ -55,6 +62,9 @@ static int parse_args(int argc, char **a
{
int count = 0;
char medium[IFNAMSIZ];
+#if defined(ISATAP)
+ int isatap = 0;
+#endif
memset(p, 0, sizeof(*p));
memset(&medium, 0, sizeof(medium));
@@ -90,6 +100,15 @@ static int parse_args(int argc, char **a
exit(-1);
}
p->iph.protocol = IPPROTO_IPV6;
+#if defined(ISATAP)
+ } else if (strcmp(*argv, "isatap") == 0) {
+ if (p->iph.protocol && p->iph.protocol != IPPROTO_IPV6) {
+ fprintf(stderr,"You managed to ask for more than one tunnel mode.\n");
+ exit(-1);
+ }
+ p->iph.protocol = IPPROTO_IPV6;
+ isatap++;
+#endif
} else {
fprintf(stderr,"Cannot guess tunnel mode.\n");
exit(-1);
@@ -160,6 +179,20 @@ static int parse_args(int argc, char **a
NEXT_ARG();
if (strcmp(*argv, "any"))
p->iph.saddr = get_addr32(*argv);
+#if defined(ISATAP)
+ } else if (strcmp(*argv, "router") == 0) {
+ NEXT_ARG();
+ if (strcmp(*argv, "any"))
+ p->router = get_addr32(*argv);
+ } else if (strcmp(*argv, "lifetime") == 0) {
+ unsigned uval;
+ NEXT_ARG();
+ if (get_unsigned(&uval, *argv, 0)) {
+ invarg("invalid lifetime\n", *argv);
+ exit(-1);
+ }
+ p->lifetime = uval;
+#endif
} else if (strcmp(*argv, "dev") == 0) {
NEXT_ARG();
strncpy(medium, *argv, IFNAMSIZ-1);
@@ -212,6 +245,12 @@ static int parse_args(int argc, char **a
p->iph.protocol = IPPROTO_IPIP;
else if (memcmp(p->name, "sit", 3) == 0)
p->iph.protocol = IPPROTO_IPV6;
+#if defined(ISATAP)
+ else if (memcmp(p->name, "isatap", 6) == 0) {
+ p->iph.protocol = IPPROTO_IPV6;
+ isatap++;
+ }
+#endif
}
if (p->iph.protocol == IPPROTO_IPIP || p->iph.protocol == IPPROTO_IPV6) {
@@ -239,6 +278,22 @@ static int parse_args(int argc, char **a
fprintf(stderr, "Broadcast tunnel requires a source address.\n");
return -1;
}
+#if defined(ISATAP)
+ if (isatap) {
+ if (p->iph.daddr) {
+ fprintf(stderr, "no remote with isatap.\n");
+ return -1;
+ }
+ if (!p->router) p->router = INADDR_NONE;
+ if (!p->lifetime) p->lifetime = 120;
+ } else {
+ if (p->router || p->lifetime) {
+ fprintf(stderr, "router/lifetime only for isatap.\n");
+ return -1;
+ }
+ }
+#endif
+
return 0;
}
[-- Attachment #2: isatap_iproute2.txt --]
[-- Type: text/plain, Size: 3125 bytes --]
--- iproute2-2.6.23/ip/iptunnel.c.orig 2007-11-08 16:27:24.000000000 -0800
+++ iproute2-2.6.23/ip/iptunnel.c 2007-11-09 15:47:06.000000000 -0800
@@ -1,3 +1,5 @@
+#define ISATAP
+
/*
* iptunnel.c "ip tunnel"
*
@@ -39,7 +41,12 @@ static void usage(void) __attribute__((n
static void usage(void)
{
fprintf(stderr, "Usage: ip tunnel { add | change | del | show } [ NAME ]\n");
+#if defined(ISATAP)
+ fprintf(stderr, " [ mode { ipip | gre | sit | isatap } ]\n");
+ fprintf(stderr, " [ remote ADDR ] [ local ADDR ] [ router ADDR ] [ lifetime NUMBER ]\n");
+#else
fprintf(stderr, " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n");
+#endif
fprintf(stderr, " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n");
fprintf(stderr, " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n");
fprintf(stderr, "\n");
@@ -55,6 +62,9 @@ static int parse_args(int argc, char **a
{
int count = 0;
char medium[IFNAMSIZ];
+#if defined(ISATAP)
+ int isatap = 0;
+#endif
memset(p, 0, sizeof(*p));
memset(&medium, 0, sizeof(medium));
@@ -90,6 +100,15 @@ static int parse_args(int argc, char **a
exit(-1);
}
p->iph.protocol = IPPROTO_IPV6;
+#if defined(ISATAP)
+ } else if (strcmp(*argv, "isatap") == 0) {
+ if (p->iph.protocol && p->iph.protocol != IPPROTO_IPV6) {
+ fprintf(stderr,"You managed to ask for more than one tunnel mode.\n");
+ exit(-1);
+ }
+ p->iph.protocol = IPPROTO_IPV6;
+ isatap++;
+#endif
} else {
fprintf(stderr,"Cannot guess tunnel mode.\n");
exit(-1);
@@ -160,6 +179,20 @@ static int parse_args(int argc, char **a
NEXT_ARG();
if (strcmp(*argv, "any"))
p->iph.saddr = get_addr32(*argv);
+#if defined(ISATAP)
+ } else if (strcmp(*argv, "router") == 0) {
+ NEXT_ARG();
+ if (strcmp(*argv, "any"))
+ p->router = get_addr32(*argv);
+ } else if (strcmp(*argv, "lifetime") == 0) {
+ unsigned uval;
+ NEXT_ARG();
+ if (get_unsigned(&uval, *argv, 0)) {
+ invarg("invalid lifetime\n", *argv);
+ exit(-1);
+ }
+ p->lifetime = uval;
+#endif
} else if (strcmp(*argv, "dev") == 0) {
NEXT_ARG();
strncpy(medium, *argv, IFNAMSIZ-1);
@@ -212,6 +245,12 @@ static int parse_args(int argc, char **a
p->iph.protocol = IPPROTO_IPIP;
else if (memcmp(p->name, "sit", 3) == 0)
p->iph.protocol = IPPROTO_IPV6;
+#if defined(ISATAP)
+ else if (memcmp(p->name, "isatap", 6) == 0) {
+ p->iph.protocol = IPPROTO_IPV6;
+ isatap++;
+ }
+#endif
}
if (p->iph.protocol == IPPROTO_IPIP || p->iph.protocol == IPPROTO_IPV6) {
@@ -239,6 +278,22 @@ static int parse_args(int argc, char **a
fprintf(stderr, "Broadcast tunnel requires a source address.\n");
return -1;
}
+#if defined(ISATAP)
+ if (isatap) {
+ if (p->iph.daddr) {
+ fprintf(stderr, "no remote with isatap.\n");
+ return -1;
+ }
+ if (!p->router) p->router = INADDR_NONE;
+ if (!p->lifetime) p->lifetime = 120;
+ } else {
+ if (p->router || p->lifetime) {
+ fprintf(stderr, "router/lifetime only for isatap.\n");
+ return -1;
+ }
+ }
+#endif
+
return 0;
}
next prev parent reply other threads:[~2007-11-10 0:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-08 20:29 [PATCH 01/05] ipv6: RFC4214 Support (2) osprey67
2007-11-10 0:34 ` [PATCH 01/05] ipv6: RFC4214 Support (3) osprey67
2007-11-10 0:35 ` [PATCH 02/05] " osprey67
2007-11-10 0:35 ` [PATCH 03/05] " osprey67
2007-11-10 0:35 ` [PATCH 04/05] " osprey67
2007-11-10 0:35 ` [PATCH 05/05] " osprey67
2007-11-10 0:42 ` osprey67 [this message]
2007-11-10 1:04 ` [PATCH 01/01] iproute2-2.6.23: " Patrick McHardy
2007-11-12 15:57 ` [PATCH 01/01] iproute2-2.6.23: RFC4214 Support (4) osprey67
2007-11-12 17:55 ` Templin, Fred L
2007-11-10 1:44 ` [PATCH 05/05] ipv6: RFC4214 Support (3) YOSHIFUJI Hideaki / 吉藤英明
2007-11-12 15:54 ` [PATCH 01/05] ipv6: RFC4214 Support (4) osprey67
2007-11-12 15:54 ` [PATCH 02/05] " osprey67
2007-11-12 15:54 ` [PATCH 03/05] " osprey67
2007-11-12 15:55 ` [PATCH 04/05] " osprey67
2007-11-12 15:55 ` [PATCH 05/05] " osprey67
2007-11-12 17:48 ` Templin, Fred L
2007-11-13 20:53 ` [PATCH 05/05] ipv6: RFC4214 Support (3) Stephen Hemminger
2007-11-14 5:05 ` David Miller
2007-11-14 5:11 ` Stephen Hemminger
2007-11-14 20:09 ` Vlad Yasevich
[not found] <753838.51488.qm@web82105.mail.mud.yahoo.com>
2007-11-11 3:26 ` [PATCH 01/01] iproute2-2.6.23: " Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4734FE8D.5070107@yahoo.com \
--to=osprey67@yahoo.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).