From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: Joonwoo Park <joonwpark81@gmail.com>
Cc: 'David Miller' <davem@davemloft.net>,
netdev@vger.kernel.org,
'Dave Johnson' <djohnson+linux-kernel@sw.starentnetworks.com>,
linux-kernel@vger.kernel.org, e1000-devel@lists.sourceforge.net
Subject: Re: [PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode
Date: Mon, 12 Nov 2007 09:12:40 -0800 [thread overview]
Message-ID: <47388988.1000506@intel.com> (raw)
In-Reply-To: <47365200.0f10240a.0686.2173@mx.google.com>
Joonwoo Park wrote:
> IMHO even though netdevice is in the promiscuous mode, we should receive all of ingress packets.
> This disable the vlan filtering feature when a vlan hw accel configured e1000 device goes into promiscuous mode.
> This make packets visible to sniffers though it's not vlan id of itself.
> Any check, comments will be appreciated.
Actually I think this patch removes a choice from the user.
Before this patch, the user can sniff all traffic by disabling vlans, or a
specific vlan only by leaving vlans on when going into promisc mode.
After this patch, the user has no choice but to sniff all vlans at all times.
I don't think that that is such a good improvement.
Auke
> Thanks.
>
> Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
> ---
> drivers/net/e1000/e1000_main.c | 26 ++++++++++++++++++++------
> 1 files changed, 20 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 72deff0..cdd5c84 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -2424,7 +2424,7 @@ e1000_set_multi(struct net_device *netdev)
> struct e1000_adapter *adapter = netdev_priv(netdev);
> struct e1000_hw *hw = &adapter->hw;
> struct dev_mc_list *mc_ptr;
> - uint32_t rctl;
> + uint32_t rctl, ctrl;
> uint32_t hash_value;
> int i, rar_entries = E1000_RAR_ENTRIES;
> int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
> @@ -2441,14 +2441,25 @@ e1000_set_multi(struct net_device *netdev)
> /* Check for Promiscuous and All Multicast modes */
>
> rctl = E1000_READ_REG(hw, RCTL);
> + ctrl = E1000_READ_REG(&adapter->hw, CTRL);
>
> if (netdev->flags & IFF_PROMISC) {
> rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
> - } else if (netdev->flags & IFF_ALLMULTI) {
> - rctl |= E1000_RCTL_MPE;
> - rctl &= ~E1000_RCTL_UPE;
> + if (adapter->hw.mac_type != e1000_ich8lan) {
> + if (ctrl & E1000_CTRL_VME)
> + rctl &= ~E1000_RCTL_VFE;
> + }
> } else {
> - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
> + if (adapter->hw.mac_type != e1000_ich8lan) {
> + if (ctrl & E1000_CTRL_VME)
> + rctl |= E1000_RCTL_VFE;
> + }
> + if (netdev->flags & IFF_ALLMULTI) {
> + rctl |= E1000_RCTL_MPE;
> + rctl &= ~E1000_RCTL_UPE;
> + } else {
> + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
> + }
> }
>
> E1000_WRITE_REG(hw, RCTL, rctl);
> @@ -4952,7 +4963,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
> if (adapter->hw.mac_type != e1000_ich8lan) {
> /* enable VLAN receive filtering */
> rctl = E1000_READ_REG(&adapter->hw, RCTL);
> - rctl |= E1000_RCTL_VFE;
> + if (netdev->flags & IFF_PROMISC)
> + rctl &= ~E1000_RCTL_VFE;
> + else
> + rctl |= E1000_RCTL_VFE;
> rctl &= ~E1000_RCTL_CFIEN;
> E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
> e1000_update_mng_vlan(adapter);
> ---
>
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2007-11-12 17:13 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-11 0:51 [PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode Joonwoo Park
2007-11-12 17:12 ` Kok, Auke [this message]
2007-11-12 17:21 ` Patrick McHardy
2007-11-12 18:01 ` Kok, Auke
2007-11-12 22:33 ` David Miller
2007-11-12 22:43 ` Chris Friesen
2007-11-12 22:54 ` Kok, Auke
2007-11-14 11:48 ` Benny Amorsen
2007-11-12 22:57 ` David Miller
2007-11-12 23:15 ` Willy Tarreau
2007-11-12 23:19 ` David Miller
2007-11-12 23:32 ` Willy Tarreau
2007-11-12 23:38 ` Kok, Auke
2007-11-12 23:40 ` David Miller
2007-11-13 1:21 ` Joonwoo Park
2007-11-13 10:21 ` Patrick McHardy
2007-11-13 11:09 ` Herbert Xu
2007-11-13 11:36 ` David Miller
2007-11-13 12:03 ` Herbert Xu
2007-11-13 12:06 ` David Miller
2007-11-13 12:16 ` Herbert Xu
2007-11-13 12:18 ` Patrick McHardy
2007-11-13 16:41 ` Kok, Auke
2007-11-13 17:26 ` Patrick McHardy
2007-11-13 17:30 ` Kok, Auke
2007-11-14 9:42 ` Patrick McHardy
2007-11-14 23:30 ` Kok, Auke
2007-11-13 19:59 ` Kok, Auke
2007-11-13 12:32 ` David Miller
2007-11-13 1:21 ` Joonwoo Park
2007-11-12 22:28 ` David Miller
2007-11-13 20:43 ` Stephen Hemminger
-- strict thread matches above, loose matches on Subject: below --
2007-11-14 4:47 Joonwoo Park
2007-11-14 5:12 ` Kok, Auke
2007-11-14 6:15 ` Joonwoo Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47388988.1000506@intel.com \
--to=auke-jan.h.kok@intel.com \
--cc=davem@davemloft.net \
--cc=djohnson+linux-kernel@sw.starentnetworks.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=joonwpark81@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).