From: "H. Peter Anvin" <hpa@zytor.com>
To: Mike Frysinger <vapier@gentoo.org>
Cc: Netdev List <netdev@vger.kernel.org>, klibc list <klibc@zytor.com>
Subject: Re: [klibc] [patch] import socket defines
Date: Wed, 02 Jan 2008 10:09:56 -0800 [thread overview]
Message-ID: <477BD374.6060506@zytor.com> (raw)
In-Reply-To: <200801020830.43449.vapier@gentoo.org>
[-- Attachment #1: Type: text/plain, Size: 912 bytes --]
Mike Frysinger wrote:
> On Tuesday 01 January 2008, H. Peter Anvin wrote:
>> Mike Frysinger wrote:
>>> The kernel __GLIBC__ hacks were re-added so as to appease klibc people,
>>> but the klibc people didnt actually fix the problem on their side. This
>>> patch imports the structures/defines that klibc seems to need. Build
>>> tested on x86_64 (i dont actually use klibc so no idea how to test it).
>> The whole point was to NOT need to replicate all these structures and
>> constants, which are part of the ABI, in klibc...
>
> then figure out a way that doesnt make the kernel headers blow for everyone
> else out there. change the __GLIBC__ crap to __KLIBC__ or something.
Seems the most logical thing to do would be to break out the small
portion that everyone wants into <linux/sockaddr.h> or somesuch, and
then remove those ifdefs entirely.
Proposed patch (still being tested) attached...
-hpa
[-- Attachment #2: 0001-linux-socket.h-break-out-glibc-portions-into-l.patch --]
[-- Type: text/x-patch, Size: 3780 bytes --]
>From 727c56ac213bdaedb9247c442375a5979686acf5 Mon Sep 17 00:00:00 2001
From: H. Peter Anvin <hpa@zytor.com>
Date: Wed, 2 Jan 2008 10:08:16 -0800
Subject: [PATCH] <linux/socket.h>: break out "glibc" portions into <linux/sockaddr.h>
Some userspaces (e.g. klibc) want to be able to use the full set of
ABI constants in <linux/socket.h>, others (e.g. glibc) do not, and
rather want just the bare minimum to build a kernel-valid
sockaddr... but apparently they want that much. This is currently
keyed on the existence of __GLIBC__, which is clearly wrong.
This patch breaks out the "bare minimum" into <linux/sockaddr.h> for
the userspaces who want to do it themselves, and eliminates the
ifdefs completely.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
include/linux/Kbuild | 1 +
include/linux/sockaddr.h | 19 +++++++++++++++++++
include/linux/socket.h | 21 ++-------------------
3 files changed, 22 insertions(+), 19 deletions(-)
create mode 100644 include/linux/sockaddr.h
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index f30fa92..f8bbb31 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -139,6 +139,7 @@ header-y += rose.h
header-y += serial_reg.h
header-y += smbno.h
header-y += snmp.h
+header-y += sockaddr.h
header-y += sockios.h
header-y += som.h
header-y += sound.h
diff --git a/include/linux/sockaddr.h b/include/linux/sockaddr.h
new file mode 100644
index 0000000..f182083
--- /dev/null
+++ b/include/linux/sockaddr.h
@@ -0,0 +1,19 @@
+#ifndef _KERNEL_SOCKADDR_H
+#define _KERNEL_SOCKADDR_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE 128 /* Implementation specific max size */
+#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
+ /* Implementation specific desired alignment */
+
+struct __kernel_sockaddr_storage {
+ unsigned short ss_family; /* address family */
+ /* Following field(s) are implementation specific */
+ char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+ /* space to achieve desired size, */
+ /* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
+
+#endif /* _KERNEL_SOCKADDR_H */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index c22ef1c..9cd6edc 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,23 +1,7 @@
#ifndef _LINUX_SOCKET_H
#define _LINUX_SOCKET_H
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE 128 /* Implementation specific max size */
-#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
- /* Implementation specific desired alignment */
-
-struct __kernel_sockaddr_storage {
- unsigned short ss_family; /* address family */
- /* Following field(s) are implementation specific */
- char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
- /* space to achieve desired size, */
- /* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
+#include <linux/sockaddr.h>
#include <asm/socket.h> /* arch-dependent defines */
#include <linux/sockios.h> /* the SIOCxxx I/O controls */
#include <linux/uio.h> /* iovec support */
@@ -310,7 +294,6 @@ extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
extern int move_addr_to_user(void *kaddr, int klen, void __user *uaddr, int __user *ulen);
extern int move_addr_to_kernel(void __user *uaddr, int ulen, void *kaddr);
extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
+#endif /* __KERNEL__ */
-#endif
-#endif /* not kernel and not glibc */
#endif /* _LINUX_SOCKET_H */
--
1.5.3.6
next parent reply other threads:[~2008-01-02 18:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200801012029.21432.vapier@gentoo.org>
[not found] ` <477AF86E.1080309@zytor.com>
[not found] ` <200801020830.43449.vapier@gentoo.org>
2008-01-02 18:09 ` H. Peter Anvin [this message]
2008-01-11 6:16 ` [klibc] [patch] import socket defines David Miller
2008-01-11 6:23 ` Mike Frysinger
2008-01-11 6:41 ` H. Peter Anvin
2008-01-11 6:47 ` David Miller
2008-01-11 7:02 ` H. Peter Anvin
2008-01-11 7:07 ` Mike Frysinger
2008-01-11 7:10 ` H. Peter Anvin
2008-01-11 7:42 ` H. Peter Anvin
2008-01-11 7:57 ` Mike Frysinger
2008-01-11 8:00 ` H. Peter Anvin
2008-01-11 9:02 ` Mike Frysinger
2008-01-11 9:28 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=477BD374.6060506@zytor.com \
--to=hpa@zytor.com \
--cc=klibc@zytor.com \
--cc=netdev@vger.kernel.org \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).