From: Joonwoo Park <joonwpark81@gmail.com>
To: "Zhu, Yi" <yi.zhu@intel.com>, netdev@vger.kernel.org
Cc: "Chatre, Reinette" <reinette.chatre@intel.com>,
linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org
Subject: Re: [ipw3945-devel] [PATCH 2/5] iwlwifi: iwl3945 synchronize interruptand tasklet for down iwlwifi
Date: Mon, 14 Jan 2008 18:42:42 +0900 [thread overview]
Message-ID: <478B2E92.5090901@gmail.com> (raw)
In-Reply-To: <478B1EBF.8030701@gmail.com>
I'm so sorry for mangled patch.
resending patch with preformat html from thunderbird.
After disabling interrupts, it's possible irq & tasklet is pending or running
This patch eleminates races for down iwlwifi.
Since synchronize_irq can introduce iwl_irq_tasklet, tasklet_kill should be
called after doing synchronize_irq.
To avoid races between iwl_synchronize_irq and iwl_irq_tasklet
STATUS_INT_ENABLED flag is needed.
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 33 ++++++++++++++++++++++-----
1 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 6e20725..f98cd4f 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4405,6 +4405,14 @@ static void iwl_print_rx_config_cmd(struct iwl_rxon_cmd *rxon)
}
#endif
+static void iwl_synchronize_interrupts(struct iwl_priv *priv)
+{
+ synchronize_irq(priv->pci_dev->irq);
+ /* synchornize_irq introduces irq_tasklet,
+ * tasklet_kill should be called after doing synchronize_irq */
+ tasklet_kill(&priv->irq_tasklet);
+}
+
static void iwl_enable_interrupts(struct iwl_priv *priv)
{
IWL_DEBUG_ISR("Enabling interrupts\n");
@@ -4413,7 +4421,7 @@ static void iwl_enable_interrupts(struct iwl_priv *priv)
iwl_flush32(priv, CSR_INT_MASK);
}
-static inline void iwl_disable_interrupts(struct iwl_priv *priv)
+static inline void __iwl_disable_interrupts(struct iwl_priv *priv)
{
clear_bit(STATUS_INT_ENABLED, &priv->status);
@@ -4427,6 +4435,13 @@ static inline void iwl_disable_interrupts(struct iwl_priv *priv)
iwl_flush32(priv, CSR_INT);
iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
iwl_flush32(priv, CSR_FH_INT_STATUS);
+}
+
+static inline void iwl_disable_interrupts(struct iwl_priv *priv)
+{
+ __iwl_disable_interrupts(priv);
+
+ iwl_synchronize_interrupts(priv);
IWL_DEBUG_ISR("Disabled interrupts\n");
}
@@ -4708,7 +4723,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
IWL_ERROR("Microcode HW error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
+ __iwl_disable_interrupts(priv);
+ IWL_DEBUG_ISR("Disabled interrupts\n");
iwl_irq_handle_error(priv);
@@ -4814,8 +4830,11 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh);
}
- /* Re-enable all interrupts */
- iwl_enable_interrupts(priv);
+ /* To avoid race when device goes down,
+ * it should be discarded to enable interrupts */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ /* Re-enable all interrupts */
+ iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_debug_level & (IWL_DL_ISR)) {
@@ -4876,8 +4895,10 @@ unplugged:
return IRQ_HANDLED;
none:
- /* re-enable interrupts here since we don't have anything to service. */
- iwl_enable_interrupts(priv);
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ /* re-enable interrupts here since we don't have anything
+ * to service. */
+ iwl_enable_interrupts(priv);
spin_unlock(&priv->lock);
return IRQ_NONE;
}
---
Thanks,
Joonwoo
prev parent reply other threads:[~2008-01-14 9:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-09 11:02 [PATCH 2/5] iwlwifi: iwl3945 synchronize interrupt and tasklet for down iwlwifi Joonwoo Park
[not found] ` <11998765481610-git-send-email-joonwpark81-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-01-10 19:10 ` [ipw3945-devel] [PATCH 2/5] iwlwifi: iwl3945 synchronize interruptand " Chatre, Reinette
2008-01-11 1:24 ` Joonwoo Park
[not found] ` <D936D925018D154694D8A362EEB0892003602E2D@orsmsx416.amr.corp.intel.com>
[not found] ` <b25c3fa70801101838o7a71cc60h1c8b8a71624aeff9@mail.gmail.com>
[not found] ` <b25c3fa70801101838o7a71cc60h1c8b8a71624aeff9-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-01-14 8:35 ` [ipw3945-devel] " Joonwoo Park
2008-01-14 9:42 ` Joonwoo Park [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=478B2E92.5090901@gmail.com \
--to=joonwpark81@gmail.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=reinette.chatre@intel.com \
--cc=yi.zhu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).