Re: occasionally corrupted network stats in /proc/net/dev

[Eric Dumazet <dada1@cosmosbay.com>]

Mark Seger a écrit :
> I had posted the following on linux-net and haven't see any responses 
> possibly because nobody had any or that list is obsolete.  I have been 
> told this is the current list for everything networking on linux so I 
> thought I'd try again...
>
> I suspect the answer will be that it is what it is, but here's the 
> deal.  I have a tool I use for monitoring network traffic among other 
> things - see http://collectl.sourceforge.net/ - and one of its 
> benefits  is that you can run it continuously as a daemon (similar to 
> sar) and generate data in a format suitable for plotting.  This means 
> that you can automate your entire network monitoring infrastructure at 
> fairly fine granularity, down to second if you like.  Actually 
> 1-second level monitoring will provide incorrect data on earlier 
> kernels because the stats aren't updated on 1 second boundaries and 
> you need to monitor at an interval of 0.9765 seconds, but that's a 
> different story which is explained at 
> http://collectl.sourceforge.net/NetworkStats.html
>
> But more importantly, I've found that occasionally (not that often) 
> there is bogus data reported from /proc/net/dev.  While I don't have a 
> lot of details on this it seems to only show up in 64 bit kernels.  
> Look at the following samples taken at 1 second intervals:
>
> eth0:135115809 1024897    0    0    0     0          0         9 
> 135458926  910340    0    0    0     0       0          0
> eth0:135118023 1024923    0    0    0     0          0         9 
> 135460952  910363    0    0    0     0       0          0
> eth0:        0  884620    0    0    0     0          0    909397   
> 9687563 1049736    0    0    0     0       0          0
> eth0:135121189 1024957    0    0    0     0          0         9 
> 135464222  910400    0    0    0     0       0          0
> eth0:135129565 1024995    0    0    0     0          0         9 
> 135473687  910435    0    0    0     0       0          0
>
> see the middle sample?  When I look at the change between samples it 
> generates a really big number since the difference is assumed to be 
> caused a counter wrapping.  The problem is it's not always 
> straightforward when there is bad data.  For example if the original 
> and bogus values are close enough it's not even clear there is a problem.
>
> So the obvious question is, is there any way to prevent the bogus data 
> from getting reported?   If not, is there any way to set the values to 
> something to indicate that the correct values can't be determined?  
> Clearly this problem would be visible to any tool that looks at /proc 
> but since many tools are not automated or don't take it to the level I 
> do, nobody probably notices.  As for the counter update frequency, 
> even though they now appear to be updated closer to a 1 second 
> boundary it also means tools that can monitor at sub-second intervals 
> will report incorrect data since the counters only change once a second.
What is the NIC used for eth0 (and driver name)

Which version of linux kernel do you run ?