netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Badalian Vyacheslav <slavon@bigtelecom.ru>
To: David Miller <davem@davemloft.net>
Cc: elendil@planet.nl, netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [REGRESSION] 2.6.24-rc7: e1000: Detected Tx Unit Hang
Date: Wed, 16 Jan 2008 12:02:28 +0300	[thread overview]
Message-ID: <478DC824.4030600@bigtelecom.ru> (raw)
In-Reply-To: <20080114.215317.38045859.davem@davemloft.net>

applied to 2.6.24-rc7-git2
Have messages
Also have regression after apply patch.
System may do above 800mbs traffic before patch. After its "exit polling 
mode?" (4 CPU, 1 cpu get 100% si (process ksoftirqd/0), 3 CPU is IDLE)
After patch system was go to "exit polling mode" at above 600mbs.

Thanks.

> From: Frans Pop <elendil@planet.nl>
> Date: Tue, 15 Jan 2008 06:25:10 +0100
>
>   
>> kernel: e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
>>     
>
> Does this make the problem go away?
>
> (Note this isn't the final correct patch we should apply.  There
>  is no reason why this revert back to the older ->poll() logic
>  here should have any effect on the TX hang triggering...)
>
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
> index 13d57b0..cada32c 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -3919,7 +3919,7 @@ e1000_clean(struct napi_struct *napi, int budget)
>  {
>  	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
>  	struct net_device *poll_dev = adapter->netdev;
> -	int work_done = 0;
> +	int tx_work = 0, work_done = 0;
>  
>  	/* Must NOT use netdev_priv macro here. */
>  	adapter = poll_dev->priv;
> @@ -3929,8 +3929,8 @@ e1000_clean(struct napi_struct *napi, int budget)
>  	 * simultaneously.  A failure obtaining the lock means
>  	 * tx_ring[0] is currently being cleaned anyway. */
>  	if (spin_trylock(&adapter->tx_queue_lock)) {
> -		e1000_clean_tx_irq(adapter,
> -				   &adapter->tx_ring[0]);
> +		tx_work = e1000_clean_tx_irq(adapter,
> +					     &adapter->tx_ring[0]);
>  		spin_unlock(&adapter->tx_queue_lock);
>  	}
>  
> @@ -3938,7 +3938,7 @@ e1000_clean(struct napi_struct *napi, int budget)
>  	                  &work_done, budget);
>  
>  	/* If budget not fully consumed, exit the polling mode */
> -	if (work_done < budget) {
> +	if (!tx_work && (work_done < budget)) {
>  		if (likely(adapter->itr_setting & 3))
>  			e1000_set_itr(adapter);
>  		netif_rx_complete(poll_dev, napi);
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   


  parent reply	other threads:[~2008-01-16  9:02 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-15  5:25 [REGRESSION] 2.6.24-rc7: e1000: Detected Tx Unit Hang Frans Pop
2008-01-15  5:53 ` David Miller
2008-01-15  6:17   ` Frans Pop
2008-01-15 14:04   ` Frans Pop
2008-01-15 16:04     ` slavon
2008-01-15 21:53       ` Brandeburg, Jesse
2008-01-16  5:02         ` David Miller
2008-01-16  8:56           ` Frans Pop
2008-01-16 10:29             ` David Miller
2008-01-16 17:07               ` Robert Olsson
2008-01-18 12:11                 ` David Miller
2008-01-18 13:00                   ` Robert Olsson
2008-01-18 13:37                     ` David Miller
2008-01-20  9:20                       ` Brandeburg, Jesse
2008-01-20  9:28                         ` Andrey Rahmatullin
2008-01-21 13:27                   ` Robert Olsson
2008-01-21 13:29                     ` David Miller
2008-01-17  7:09           ` Brandeburg, Jesse
2008-01-17  7:20             ` David Miller
2008-01-17  7:51               ` Frans Pop
2008-01-17  8:00                 ` David Miller
2008-01-17  9:40                   ` Arnaldo Carvalho de Melo
2008-01-17  9:45                     ` David Miller
2008-01-16  9:02   ` Badalian Vyacheslav [this message]
2008-01-16 12:25     ` David Miller
2008-01-16 12:28     ` David Miller
2008-01-21  6:54       ` Badalian Vyacheslav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=478DC824.4030600@bigtelecom.ru \
    --to=slavon@bigtelecom.ru \
    --cc=davem@davemloft.net \
    --cc=elendil@planet.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).