From: Jeff Garzik <jgarzik@pobox.com>
To: avorontsov@ru.mvista.com
Cc: Kumar Gala <galak@kernel.crashing.org>,
Timur Tabi <timur@freescale.com>,
Grant Likely <grant.likely@secretlab.ca>,
Li Yang <leoli@freescale.com>,
linuxppc-dev@ozlabs.org, linux-serial@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH] [POWERPC][NET][SERIAL] UCCs: replace device-id with cell-index
Date: Fri, 01 Feb 2008 12:52:38 -0500 [thread overview]
Message-ID: <47A35C66.80008@pobox.com> (raw)
In-Reply-To: <20080201173331.GA8020@localhost.localdomain>
Anton Vorontsov wrote:
> On Fri, Feb 01, 2008 at 09:32:38AM -0600, Kumar Gala wrote:
>> On Feb 1, 2008, at 9:01 AM, Anton Vorontsov wrote:
>>
>>> It isn't used anywhere, so remove it. If we'll ever need something
>>> like this, we'll use compatible property instead.
>>>
>>> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
>>> ---
>>>
>>> Rebased on top of recent tree.
>>>
>>> Documentation/powerpc/booting-without-of.txt | 1 -
>>> arch/powerpc/boot/dts/mpc832x_mds.dts | 3 ---
>>> arch/powerpc/boot/dts/mpc832x_rdb.dts | 2 --
>>> arch/powerpc/boot/dts/mpc836x_mds.dts | 2 --
>>> arch/powerpc/boot/dts/mpc8568mds.dts | 2 --
>>> 5 files changed, 0 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/Documentation/powerpc/booting-without-of.txt b/
>>> Documentation/powerpc/booting-without-of.txt
>>> index 410c847..dcf9758 100644
>>> --- a/Documentation/powerpc/booting-without-of.txt
>>> +++ b/Documentation/powerpc/booting-without-of.txt
>>> @@ -1675,7 +1675,6 @@ platforms are moved over to use the flattened-
>>> device-tree model.
>>> ucc@2000 {
>>> device_type = "network";
>>> compatible = "ucc_geth";
>>> - model = "UCC";
>>> device-id = <1>;
>> can we change device-id to cell-index?
>
> Sure. But let's do this in the separate patch? Because this change
> actually touches the code in the two subsystems: net and serial.
>
> I hope everybody will agree to pass it through powerpc tree..?
>
> - - - -
> From: Anton Vorontsov <avorontsov@ru.mvista.com>
> Subject: [POWERPC][NET][SERIAL] UCCs: replace device-id with cell-index
>
> device-id is worse than cell-index. Probably cell-index isn't
> good either, but device-id is worse anyway.
>
> Drivers are modified for backward compatibility's sake.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> Documentation/powerpc/booting-without-of.txt | 4 ++--
> arch/powerpc/boot/dts/mpc832x_mds.dts | 4 +---
> arch/powerpc/boot/dts/mpc832x_rdb.dts | 2 --
> arch/powerpc/boot/dts/mpc836x_mds.dts | 2 --
> arch/powerpc/boot/dts/mpc836x_rdk.dts | 12 ++++++------
> arch/powerpc/boot/dts/mpc8568mds.dts | 2 --
> drivers/net/ucc_geth.c | 8 +++++++-
> drivers/net/ucc_geth_mii.c | 11 ++++++++---
> drivers/serial/ucc_uart.c | 16 ++++++++++++----
> 9 files changed, 36 insertions(+), 25 deletions(-)
ACK drivers/net
prev parent reply other threads:[~2008-02-01 17:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20080201150126.GB26545@localhost.localdomain>
[not found] ` <72B60725-FB4A-42FA-832D-8FD5434B9042@kernel.crashing.org>
2008-02-01 17:33 ` [PATCH] [POWERPC][NET][SERIAL] UCCs: replace device-id with cell-index (was: Re: [PATCH] [POWERPC] get rid of `model = "UCC"' in the ucc nodes) Anton Vorontsov
2008-02-01 17:52 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A35C66.80008@pobox.com \
--to=jgarzik@pobox.com \
--cc=avorontsov@ru.mvista.com \
--cc=galak@kernel.crashing.org \
--cc=grant.likely@secretlab.ca \
--cc=leoli@freescale.com \
--cc=linux-serial@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).